Making a Boomerang - Scrapwood Challenge Episode Thirteen

My Premier Project Plans: paskmakes.com/premier-project...
My Free Plans: paskmakes.com/free-plans/
This was a quick video thrown together as I've had something else to deal with this week and not much time to make a Scrapwood Challenge video. I made one first out of plywood just to see how it would go and that one flew better. This boomerang came out nice though (I had my doubts when I glued it up) and I'm sure with some fine tuning (I ran out of time) it will work just as well!
Using quarter inch plywood would be a much easier way to make one but I had to make one using the scrapwood and this seemed to be the best way of doing so!
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

[@PaskMakes]

This was a quick video thrown together as I've had something else to deal with this week and not much time to make a Scrapwood Challenge video. I made one first out of plywood just to see how it would go and that one flew better. This boomerang came out nice though (I had my doubts when I glued it up) and I'm sure with some fine tuning (I ran out of time) it will work just as well! Using quarter inch plywood would be a much easier way to make one but I had to make one using the scrapwood and this seemed to be the best way of doing so! :)

[@XJWill1]

I would like to see a comparison between the scrapwood boomerang and the plywood boomerang. Both how they look and how they fly.

[@misfitramone]

Pask Makes kzbin.info/www/bejne/sKipc2eEidyJZs0 this is a link to a "how to make the wooden mold"

[@billroache6244]

Hey pask great work love your videos. I was wondering think you could make a archery recurve bow with scraps? I only got the idea from seeing you make the ply for this just wondering if it would be possible?

[@Zogg1281]

@@billroache6244 A bow would be an awesome project, but with the lengths of wood available, in the scrapwood pile, no matter how you stagger the strips with the forces placed on a full size bow I think it would have a very, very short life expectancy. It might just be possible to make the 3 sections of a take down recurve bow out of the longest pieces but it would be a very short bow

[@5k37ch0]

1/4 is much too thick. I have noticed mine fly fine but when they get sealer or paint the extra weight is far too much. I would plane to 5/16 before finish

[@BigLove24-7]

I forgot how to throw my boomerang, but it came back to me pretty quick.

[@nyah6005]

wow.

[@Malcolm_99]

You made me laugh!

[@ytoal]

That was a good one mate

[@johnnybravo1717]

Good thing you already have one - faulty boomerangs are non-returnable.

[@OldJoe212]

I could never make a boomerang work when I was a kid. Was reading one of my father's Popular Mechanics and they had an article on how to make a boomerang. Found out that all store bought 'rangs (at least at that time) were right-handed and I'm left. I was about 10 or 11 at the time. Found some plywood and made a lefty. It was great. Thanks for reminding me of the fun I had and thanks for popsting.

[@hughjaanus6680]

thanks for popsting?

[@notahotshot]

@@hughjaanus6680, you're welcome?

[@KarlBunker]

I happened across a pile of scrap wood at a construction site the other day, and guess what song started playing in my head.

[@PaskMakes]

Haha! :)

[@hughjaanus6680]

Glad you didn't say "I came across a pile of scrap wood at a construction site .........

[@zachwolfrom4522]

Watching a Pask scrap wood video is like running into a smell that brings you back to a fond moment in your past.

[@PaskMakes]

Haha! :)

[@danielibnz]

Good job; effective bench and tools, with sharp ideas. Thanks for sharing

[@glenngoodale1709]

You and the Lil'dog had some fun ! LOL good project

[@mozismobile]

I love how the dogs quickly clued in that this stick wasn't worth chasing

[@jkr3008]

How beautiful those trees are. The nature in Australia is magnificent. You live in a wonderful environment, Neil.

[@PaskMakes]

Thanks mate! It's not a bad place to live! :)

[@NoBullFitness]

I used to make these differently a long time ago. I stopped doing these and forgot how to. And now it’s coming back to me

[@paulgee4336]

40 years ago my older brother went to Hawaii for some High School music thing, and he brought back my younger brother and I these small "triangle"-shaped boomerangs made out of seemingly hand carved Monkey Wood or something. (several inches in length, well less than a foot -- not the weird-shaped UFO style like in this video) They must have been made by a master boomerang maker, because they were the best boomerangs I have ever seen or used. I've tried to find one like it for decades and have never been able to replace it. Not even close. We eventually lost them. One on top of a mobile home in a park we used to throw them way out over and one in a fig tree where we couldn't find it. You could throw them half a football field away and they would circle back and you could catch them. They were really excellent boomerangs. (now I wish we would have climbed up on the mobile home for the one and looked harder for the one in the tree)

[@hughjaanus6680]

"hand carved Monkey Wood or something" Well if it wasn't monkey wood it had to be something.

[@codys2018]

Throwing stuff at a tree to get your toy back is the most whimsical activity that one never appreciated as a child.

[@bullandtimber]

I love the scrapwood challenge series, I've watched all of them! I like how creative you are with it and how all the projects are very different from each other. Great work!

[@mattalsager3035]

Man, I wish I had dollar for all the times my brothers and I spent throwing sticks at trees getting various balls, frisbee's etc out of trees...but never a boomerang :) Loved to build.

[@davidtinker9121]

Me and my buddy been billing boomerangs for about 5 years now and we just want to congratulate you on being honest about your video your trial and error laugh out loud

[@xX_Skraith_Xx]

"Boomerangs are just frisbees tailored for lonely people" lol!

[@censusgary]

🎼Boomerang challenge, 🎶Boomerang challenge. 🎵 My boomer’s whacked, 🎵 It won’t come back; 🎶 I’ll make another one out of scrap.

[@PaskMakes]

Haha! That's great Gary, you nailed it! :)

[@demonstar5337]

Nó

[@sreeharimf1981]

@@PaskMakes can you telll me the template you used, i wanna try making it.

[@djAnakin]

Such an awesome project. Adding that to my list.

[@saartal4524]

Another scrapwood wonderful project! Superb use of this wood... :)

[@MakeThings]

You never cease to amaze me my friend.

[@martinwolf5957]

Hello Neil Very good job 👍🏻 👍🏻 👍🏻 cool project. Great. Greetings Martin

[@pavski]

I laughed when it was stuck in tree. Awesome video.

[@alexandrenobrega1]

The moment you don't have your headphones on when you start the video and have to rewind so you get to listen to the scrapwood music intro xD

[@PaskMakes]

Haha! :)

[@Scubadog_]

It's starting to grow onto me

[@ggmanjeetgggkumarggg861]

Sick guy....

[@vandenpiaff]

Very nice project. I wold very much like to see more to fine tuning it and see it fly. All the best to you from Denmark

[@gladious7894]

That throwing stick has boomeranged on us!

[@SharpnessSword]

Forget the boomerang the audio is this video is fantastically done, I wish more channels did their sound that well

[@Bill.L.Carroll]

That was pretty cool, man👍 DODGE! 🖐

[@francoisgobin5684]

Excellent :) Because of you I want to make some new boomerang now ! Thanks

[@PaskMakes]

That's great to hear Francois! :)

[@kaylamarie8309]

Your skill and talent is amazing. I absolutely love your tool handle making jig video..this one is really fun too 🙂

[@EYALAVRAHAMI]

You Australians are the coolest people in the world! Love your channel and miss your country, it's been too long since I've been there...

[@PaskMakes]

Thanks very much mate! Your welcome back anytime! :)

[@misfitramone]

I would love to see you do a scrap would skateboard! It's normally made of maple veneers but you could do it with camphaloral! Just make a press and then glue the veneers and see what happens!

[@PaskMakes]

That's a great idea, I'll certainly think about it! :)

[@misfitramone]

Pask Makes I'm sorry you're dealing though stuff, i hope it works out for you! You're one of my favorite builders and creators on KZbin! Keep building and if you do make a skateboard ever I'd buy it! Just as art for my wall!

[@misfitramone]

Pask Makes kzbin.info/www/bejne/sKipc2eEidyJZs0 this is a video of how to make a skateboard mold.

[@dennisbecraft1303]

I made several boomerangs from a book but the one that worked best was my own design. It was a plywood ring with 3 short blades sticking out with power sanded airfoil cross sections, a little brute force 'trihedral' bend upwards on each and a little bit of upward angle of attack built in during sanding. It was very reliable with about half the range of the one in the video. It was easy to catch by reaching up through the middle as it finished its circuit by hovering down to me. The major flaw was the 3 blades had different ply directions and the upward bends wouldn't hold for long. They kept flattening back to the plane of the ring and it tried, but didn't have the momentum to complete the larger diameter path it took. Now I should duplicate it with identical blades glued in with the proper up angle built in at the bases of the blades.

[@juadonna]

Watching this in early April, 2020. I began following your youtube channel a few months ago. I imagine the smells of wood as you cut and shape those pieces. Your furniture pieces are very lovely; they let the beauty of the wood shine through. Regarding the boomerang, even if it doesn't come all the way back to you, it's still better than jogging 50 meters to fetch it back! Greetings from Florida! Hope you and your loved ones are holding up well. Stay safe!

[@phbrinsden]

After watching other Pask videos I finally purchased a Shinto rasp. Used it right away. It’s a great shaping tool.

[@Malcolm_99]

Great video! Thank you for teaching me!

[@shannonphillips5443]

A bit of fun

[@MikeTheMaker1]

The poor dogs are like “yea I’m not falling for this anymore”

[@HardeepSingh-wi3rk]

Hanging on 🌲, top scene 😄😄😄

[@TheDomanominus]

Nice nice nice. Goooood job. All the series scrapwood challeng is very very goooood.

[@PaskMakes]

Thanks - glad you like it! :)

[@davidsykes7567]

How about making a tombola drum?

[@_P0tat07_]

Awesome! I need to retry making a boomarang. The first one I made only boomed. It did arang.

[@HarjinderSingh-cp5kx]

Nice work

[@SparrowStockwell]

Oh, how fun!

[@BadAzzCustomDesigns]

That was pretty cool.

[@hassanmehar1942]

This was hanged with tree😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😄😂😂

[@pinkponyofprey1965]

the dogs go wtf he's ruining our game. that stick isn't supposed to come back by itself??? we need to chew it to sawdust!!!!!!!!!!!!!

[@PaskMakes]

Haha! It fooled them for sure! :)

[@oliverschmack]

Great video mate!

[@mykneeshurt8393]

This was a fun looking build!

[@ADVBear]

This looks a lot of fun! Great episode. I have one of those mounted on my wall and I think I'll give it a go too.

[@PaskMakes]

Glad you enjoyed it Alex! :)

[@maryannrurup353]

Beautifully done

[@vuthap99]

for entertainment in free time, sir! Thanks for share.

[@ianvicedomini2648]

Love it mate. Hope you get it to come back soon

[@699hazard]

Traditional boomerangs made by aboriginals have the underside on one end sanded away so the boomerang has lift on one end so it comes back to you when thrown vertically.

[@maconbacon]

The madman is creating his own plywood

[@actontreadway1168]

I used to be very into making/throwing boomerangs but I got tired of answering questions from people who always thought the returning boomerang was an urban legend, every time I went out

[@thermmaloverload]

You know that if it doesn’t come back ....it’s a stick. 😂

[@Jan-hm1xz]

poor dog 5:21

[@garagemonkeysan]

Fun video. Love the scene with the rain in the background. Thank you for sharing! : )

[@opikbumerang]

The tools used are very sophisticated and modern .. very far from what I have .. very cool brother. Greetings boomerang lovers from Indonesia

[@MarkMcCluney]

That was great (seeing it raining somewhere else I mean...) It's a few years since but I've made a few 'rangs - never saw one made up from plys like that. I loved it! I think your leading edges are a wee bit 'blunt' - as you say, a bit of fine tuning. Also 'rangs are like people - they have funny moods and respond to perseverance. Thanks for that mate, really enjoyed it.

[@PaskMakes]

Glad you enjoyed it Mark! I'll do some tuning on it and see how it goes! :)

[@youngtraplord2338]

Very cool !!

[@bobs344]

Wet wood challenge wet wood challenge!🎼

[@husk79]

cool video and make! just like all your projects!

[@vishwanpurandat8302]

Wow nice nice nice... Looks like fun well it is!

[@PaskMakes]

Thanks Vishwan! It was fun but I have a sore shoulder this morning! :)

[@vishwanpurandat8302]

@@PaskMakes Needed to warm up

[@NinjunEx]

I love Boomerang! Nice vídeo!

[@FrancisMaxino]

Put some undercut on the tips and make your trailing edge bevels wider, use deeper undercut on the leading edge to create more lift and 'turn'.

[@SWARAJSINGH2008]

Lovely

[@SirWulfrick]

I love how the dogs are like "wtf?!?" as it starts to curve. :D

[@jamstinjem9231]

I like your boomerang it so cool

[@drmkiwi]

Dare I say "My boomerang won't come back"? Neat project. Cheers, David

[@witoldolbrych3140]

good job - and great dogs to help;)

[@tomwilliams9608]

I like the jig on your belt sander to make a planer

[@chrisnorton2837]

Nice work! I love your Scrapwood Challenge vids. :-)

[@kaleshwarsingh5126]

filp market.alctonic tv

[@irakeyn]

Cool. Cool. Cool

[@rcsv54]

I liked this just by hearing the intro voices hahaha love it

[@karatefox]

I'm a fan of the omega hybrid style; they tend to have a lower more balanced flight compared to a classic v-shape. Cool video.

[@badthingfpv1229]

Nice job, that plywood was pretty labor intensive though.

[@diydad6723]

nicely done 👍🏻

[@iamepimethus]

Boomerangs.....Australian black magic!

[@ShehanRS]

Beside the content , anyone admires the way he looks and the way he smiles 🥺😍? Just me ? Okay. Cool . 😐

[@brainfornothing]

Thanks for sharing !

[@bullthrush]

Boomerangs should fly perfectly in 0 wind. You need to add a "lift cut" on the underside of the left arm (lifting arm) out at the tip.

[@PaskMakes]

Thanks, I'll look into it! :)

[@whome6764]

Yep

[@carlosdk5472]

Me gustó mucho tu taller

[@sumitsingh-es7yo]

The Jungle is beautiful

[@ostrogodo]

Great work with the material. Some tips from a shaper: never let the tail edge sharp. Always leave a little "wall". That will improve. Theres also a ratio you can manage with size and thickness. Thst type of plywood i would recommend 3 or 4 winged designs. Will fly closer but better. And also you need to tune the wings. Puta the rang in a flat table and check the angles and if wings are upwards. Use vapor from a teakettle to bend it if necessary. If you didnt do it, also check the natural bend of the strips before glueing. Mark the top on them. That will make your boomerang always with positive dihedral. Cheers

[@ostrogodo]

I meant trail edge. Sorry english not my first language

[@bsoura]

This man has many vices.

[@VictorPoulin]

Very cool my friend.

[@baptistec.4546]

Dude! you invented plywood !! 😅😉👍👍👍

[@aftaparty]

Baptiste C. flywood*

[@jackavalon8366]

Yes, a it of wind in your face and it should come back nicely. Good work.

[@ashaagaming5307]

Nice boomerang

[@BruceAUlrich]

Fun...sorry you couldn't get it to come back to you. I know you will though...you don't just leave stuff alone. ha

[@fulviosamaretz4051]

Super 👏👏👏

[@charlspaculba2534]

Hhahaha your so funny. You make us happy. be still making cool boomerangs 🙂

[@ragincanadiangmail]

Christ on a bike, I truly hate boomeranging. Every one I've ever had, ended up in a tree or some other place. But I do love the scrap-wood challenge. keep it up!

[@nacioruiz5856]

Magnífico detalle Gracias

[@Cactusworkshopchannel]

nice sanding jig! great work!

[@canaan5337]

I wonder what those dogs think about your crooked stick that fetches itself.

[@bigpete4227]

I’ll come back to this video.

[@ibknl1986]

Subscribed after watching you putting so much effort for us . May Allah (God) do all good to you.

[@AbhijeetShinde9]

in the first throw the dogs were like " where it went ? i can't fetch it "

[@froilansantos6259]

"....Nice one there Senor Neil....!"

[@valdirdadasilvaalves]

Hi Pask, I love yours vídeos.

[@PaskMakes]

Thanks Valdir! :)