Patriotic Cow Hydro Dip/Waterslide Tumbler Tutorial

  Рет қаралды 581

Holleez Hobbies

Holleez Hobbies

Күн бұрын

#patriotictumbler #cowtumbler #hydrodip
holleez-hobbie...
I started with a prepped (sanded & spray painted flat white) 20 oz. tumbler. Shake your spray cans vigorously for at least a minute before spraying into your water bucket to avoid separation or clumping. Supplies I used are listed below. I used 2x Rustoleum Clear Gloss to seal my waterslide (sprayed 4 times, allowing about 15 minutes dry time in between each application).
Etsy
“The Florida Shop”
www.etsy.com/s...
Waterslide - “Highland Cow 4th Of July png”
Maestra Creations
www.maestracre...
Superstar Glitter
It’s Pretty Personal
itsprettyperso...
Diamond Dust “Touch of Gold”
Flynn Sisters Supply Shop
www.flynnsiste...
Epoxy Resin’s Artist Cure & Fast Cure
Amazon Supplies
20 oz. Tumbler
amzn.to/43EAB3i
Chemical Mask
amzn.to/3DdrSKT
Gloves
amzn.to/3z080aK
Mixing Cups
amzn.to/3ogyiAN
amzn.to/3cpQqoZ
Stir Sticks
amzn.to/3OnuwQI
Craft Knife
amzn.to/3RQcFET
Pin Pen
amzn.to/3cuPCPI
Isopropyl Alcohol
amzn.to/3RSMk96
Acetone
amzn.to/3okPEfG
Sanding Blocks
amzn.to/3v0PY7d
Torch
amzn.to/3BfvZp0
Transfer Tape
amzn.to/3YJs6Sr
2xs Rustoleum (clear gloss, flat white, gloss navy blue, ultra matte red currant)
amzn.to/3IRR6AQ
Krylon (Satin Pimento)
amzn.to/3CcRar2
Foil Vinyls (red, silver, blue)
amzn.to/43EdANL

Пікірлер: 19
@alinamurphy9263
@alinamurphy9263 Жыл бұрын
Very cute! There's so many little things that can go wrong. This turned out great.
@holleezhobbies
@holleezhobbies Жыл бұрын
Thank you so much! ❤️
@tinashepard1176
@tinashepard1176 Жыл бұрын
I love it! My daughter and I love highland cows, this is perfect for July. I have yorkies and they chew their toenails too.
@holleezhobbies
@holleezhobbies Жыл бұрын
Highland cows are among the cutest! JJ (my pup) goes to town on his toenails. My coworker who sold us JJ calls it self-grooming. Now if he can just learn to brush his own hair! 😂🤣
@Stephs2xPawsUp
@Stephs2xPawsUp Жыл бұрын
Too cute!
@holleezhobbies
@holleezhobbies Жыл бұрын
Thank you!
@CeruleanBlue1967
@CeruleanBlue1967 Жыл бұрын
Super pretty. Usually dogs bite their feet area because they itch. Usually from allergies.
@holleezhobbies
@holleezhobbies Жыл бұрын
Thank you! Oh boy...hope he doesn't have allergies. :( I'll ask the vet about it next time I go in.
@CeruleanBlue1967
@CeruleanBlue1967 Жыл бұрын
@@holleezhobbies I hope he doesn’t too. Good luck.
@madetoat
@madetoat Жыл бұрын
Super cute! I ❤ highland cows ❤. I find that if I put white and red paint into my bucket for a hydrodip, my paint swirls come out pink…I’m impressed yours didn’t! I also add less paint than you with a glitter base so you can still see the glitter underneath without having to do much work.
@holleezhobbies
@holleezhobbies Жыл бұрын
Thank you! I got super lucky with the red & white paints not mixing into pink. Less paint definitely creates a lot less work! ;)
@sjsechrest43
@sjsechrest43 Жыл бұрын
I love this tumbler! The cow is so cute and I like the stars. I had the same problem recently with my epoxy curing too soon while I was applying it, stressed me out. I decided to use my heat gun on the tumbler and it actually worked to make the epoxy liquid again so I could spread it easily. Thank goodness the crisis was averted, lol.
@holleezhobbies
@holleezhobbies Жыл бұрын
My heat gun has saved my epoxy many times, but once I held it too close for too long, & I burned the epoxy. Whoops!! 🤣
@sjsechrest43
@sjsechrest43 Жыл бұрын
@@holleezhobbies Oh no that's not good. I did that with my torch once, lol. 😬
@holleezhobbies
@holleezhobbies Жыл бұрын
🤣 I'm glad I'm not alone!
@sjsechrest43
@sjsechrest43 Жыл бұрын
@@holleezhobbies I've only been doing tumblers for about a year so it's nice to know that you pros mess up once in a while, lol.
@holleezhobbies
@holleezhobbies Жыл бұрын
@@sjsechrest43 ...ALL the time!! 🤣
@Acinom12345
@Acinom12345 Жыл бұрын
I've only used Kamar varnish a couple times, but it repels my epoxy when I use it. I only use it to seal my alcohol inks, but now I always use another sealer on top of it to prevent repelling.
@holleezhobbies
@holleezhobbies Жыл бұрын
Really? Good to know. I bought Kamar varnish, originally, to seal my decals before applying Brite Tone. Works great with water-based products.
Glitter Pencil Cup (Tumbler) Tutorial
13:07
Holleez Hobbies
Рет қаралды 866
I Spent 14 Days Painting in Off-Grid Cabins
28:16
Nerdforge
Рет қаралды 389 М.
World‘s Strongest Man VS Apple
01:00
Browney
Рет қаралды 56 МЛН
Это было очень близко...
00:10
Аришнев
Рет қаралды 2,3 МЛН
Richard Ayoade Won't Acknowledge Noel's Needs In Public | Big Fat Quiz
15:18
The Big Fat Quiz Channel
Рет қаралды 412 М.
Collaboration with @miniscenesGB and Crafty YouTubers United for Halloween 2024
8:26
Custom Transformer Shatters All Voltage Records (ft. 3D Printing Nerd)
21:23
Building a Tiny Office Pod Under My Stairs
51:47
Man Made
Рет қаралды 4 МЛН
299. You WON'T BELIEVE HOW I Made These INCREDIBLE Resin Art Pieces!
20:50
Craziest Nature Videos of the Decade
16:09
Daily Dose Of Internet
Рет қаралды 2,3 МЛН
ART SUPPLIES FOR TRAVEL ✨ Pack With Me for EUROPE!
27:17
Jess Karp
Рет қаралды 24 М.
The Client Sent My Sculpture Back... DESTROYED
17:11
BM Sculptures
Рет қаралды 1,7 МЛН