Extruder Operation and Control - Paulson Training

More information available here:
www.paulsontraining.com/produc...
This video is an exerpt from our Extruder Operation and Control - Single Screw: Lesson 1 course. This program uses state-of-the art animation technology to teach the fundamentals of single screw technology, including parts and operation, plastics used for extrusion, extruder controls, safety procedures, troubleshooting and more. Also available in Spanish.
Paulson Training Programs - Complete Training Solutions for the Plastics Industry. Visit www.paulsontraining.com for state-of-the-art interactive plastics training, offered online with Paulson's popular Paulson University available 24/7, anywhere, on any device, or via our instructor-led courses with our Paulson Plastics Academy seminars held virtually or at a technical facility nationwide. Our instructors have the Rizz!

[@sciencelovervideos4315]

So simple and so satisfying. It is always a good to see such a process that is directly connected to the basic principles of physics.

[@Hartek-Extruder-Manufacturer]

As an extruder manufacturer, I must say it's really helpful, sometimes we need to explain to customer how the extruder works, but it will be easy to understand if they look this.

[@johntempest5204]

used to work at wavin plastics on extruders we had top and bottom twin screws to start making plpes in 1973

[@Dindonmasker]

This is my favorite process. So simple yet so effective.

[@thoufeeqahmed6609]

good evening sir show me how to t Dai sheet extruder Pp ps material penal hidar cantroel sir

[@jasonguan7814]

It tells us the basic flow of material conveys, but copolymerization is a thing that needs to adjust many of the elements in a stable state. Basic elements include pressure, temperature, and time.

[@roshane87]

nice video...gives a good explanation of the single screw extruder.thanks

[@llarraify]

thanks, it was very useful. i always study these things just theoretically

[@bobanraphael4741]

Hey can you tell me which software you used for designing this machine? Is it AutoCAD or SolidWorks or something else?

[@coolnoodles2nd]

Thanks I learned a lot

[@donaldl.criderjr.411]

Thank You. This was very helpful. I wonder how they generate so much shear heat...

[@jimmybwalya3282]

turning from the screw generates pressure which translates to heat

[@juanravines2]

You can turn it on again depending of the type of polymer that was in the screw and cylinder. Some low melting temperature material like PVC tend to burnt and you'll get more problems if trying to obtain a decent product

[@tarametuariki5120]

Juan Ravines Lonzoy hi can i ask you some questions on extrusion

[@datylor1]

Can anyone tell me the type of gear box oil used on a single screw 3.5" NRM Extruder machine and the type of lubricating grease

[@mrsaturdaynightspecial3055]

What polymers are used in home casting of AR15 recovers?

[@anujpandey3193]

How will the rotation of the screw be in the extrusion process or in the injection process?

[@AnhVietmaynenkhi]

Good my job.Thanks

[@astigAARON]

You can turn it off then set a time to heat again. You have to set 2 hours to run again for production.

[@puppable]

i am going to both operate and control every single extruder i come across now

[@solomonlumor7579]

how can i design seed oil exstruder

[@laztom14]

thanks for the video. nice one.

[@Homenagembetocardoso]

what extruder for extrusion PEAD ?

[@CNCMenace]

Good vidoe, thanks for posting.

[@brenta784]

I have a small extruder and the entire barrel moves in a circular pattern maybe 1-2mm or so - which makes it very difficult to maintain tolerances on the product extruded. I thought it was due to a screw that was broken and repaired and assumed might not be 100% straight, but the same thing happens also with a new screw... what could be the cause? The motor and the gear box? A bent shaft that connects to the screw? Maybe the extruded not being level properly on a hard surface (it is on a wooden pallet)? A bent or worn out barrel?

[@Sastas]

Check the bearing. If you not have a bearing, then that will be the problem.

[@VolksTrieb]

What happens ive you once pushed plastics through it and then turn it off till its cold? Can it start then or what do you do?

[@sekouanimohammed]

very nice

[@erhanzorlu]

good work

[@plasticextrudermachine]

so cool and claify to show how the extruder machine running 👍

[@nguyendung-rh6kt]

Thank you

[@suniljoshi9565]

Nice informative video

[@Heikomeltpump]

Heiko produces melt pumps and mesh changer products.

[@imegatrone]

Your Videois an exerpt from our Extruder Operation and Control - Single Screw: Lesson 1 course. This program uses state-of-the art animation technology to teach the fundamentals of single screw technology Very Useful Sharing

[@rachidboulechbak9024]

bravo

[@adamsafolabi6618]

we have a single screw pp sheet extrusion line, but we have problem of unequal sheet length after cutting.

[@xvirk7932]

Its either the vaccum or the puller

[@rabeyaakter1988]

please make a video all problems of the machine and how to solve please ! Please !!!!!!

[@sebayacine9184]

I need more information for mechanical parts please help me 😢

[@syedkhajamohiuddin9581]

Good information

[@zeydeep9434]

Thank u from Algeria ❤

[@darwinqsp5957]

que bueno...

[@AvtarSingh-xv1vc]

THANK YOU FOR KNOWLEDGE VERY GOOD IDEA THANK YOU AGAIN SIR YOU ARE GREAT HERE KARISHNA

[@user-xj1wf3pb5z]

I want to explain how to change the cutter

[@kavicreations8071]

Hi sir !! Have any vacancy for the design and development field .

[@user-vh3hl6xn3j]

Can anyone help me, i have issue on plastics recycling extruder. When i run hdpe material production is like 3 ton for 12 hrs but for PP material flow slow down and maximum production is 2 ton.

[@pappuvishkarmavishkarma1014]

Nice

[@joechang1519]

Hi! we have static mixer. We can sale element to you, do you need ?

[@gothandaramanimraman4131]

Thanks lot sir

[@kamranabid1167]

Very Informative.

[@ainuokmachine]

Great job showing how the extruder works, it's awesome🌹🌹🌹

[@dt90891]

Basell corp has one. I rebuilt it.

[@solomonlumor7579]

what is at firepa .com

[@waseemahmed7993]

if large flow is needed than increase temperature of screen pack

[@taleenonnab2275]

?!!

[@yesserrebai1948]

hi, i have extruder machine and i have sheet thickness problem usually on the right side of the sheet is 3 mm and the left side of the sheet is 2.6mm. anyone can help me ?

[@user-mw9gw8vb2v]

Could be your sizer or the jets need cleaning and maybe the temperature and speed need adjusting?

[@parmarboyz]

How would you make multilayer thermoform.

[@coralyuchina8756]

Hello Parmar, we are the manufacturer of thermoforming making machine, you can add my Whatsapp: [phone] so I can send more running vedios to you, tks

[@antoniobueno3766]

Bom dia Qual velocidade de trabalho das estruzoura plástico e alimentos com compressão Antônio Bueno brasil

[@rajamanickam2359]

Super

[@SalimAhmed-vi2oe]

It is very informative

[@sial78617]

respected sir , i need your mentorship and gauide i am making a project for my client but he is demanding from me to show animation like this i mean to show him transformation of plastic into fluid sir its humble request with you .Would you please suggest me a software or tool which can this type of animation as you have show this animation is pretty awesome.

[@DeepakSharma-nd2vn]

Plz tell me how much demodiene use for cleaning of screw nd die of extruder to go for long tym Plz help me

[@danilopalito]

tenho q aprender inglês hem!!!

[@hansaram9691]

ABS material is good for Extruder machines

[@delphinisoardi2594]

hansa ram parihar No, you should use PET plastic

[@gks7250]

How to calculate production per hours

[@tarametuariki5120]

I have questions about extrusion

[@qiejxqiejx6442]

please send your enquiry to this email : [e-mail]

[@tatendamanzungu1140]

I’m looking for this Machine where can I find it

[@preciousogoru1151]

Tatendaishe Manzungu jiji.ng or konger

[@tatendamanzungu1140]

Michel Uduaghan Thank You

[@christinahu1710]

Hi, friend, we can help you about this machine,You can contact me directly on Mobile/Whatsapp/Wechat:0086-17051026627 Email:[e-mail]

[@MRBOM69]

We use in Saudi SABIC Double screw

[@karansidana11]

بدر العتيبي Textile machine

[@Metalympics]

Textbook plastics, important to know if you work with extruders

[@SPKpepincho]

HOLA GENTE DE 3ºA DEL IES ALBAIDA, AJAJAJAJA GOOD VIDEO MY FRIEND ;D

[@patriciocalcagno8501]

extrusion profiles

[@amohammedparwan7777]

good night sir you very honest sure b

[@marwan999]

how price

[@chj9393]

if you need any kind of rubber extruder machine,email [e-mail]

[@mijejojojojo]

it single or twin screw ?

[@maruthisharma9096]

Emizan Aizan it was single screw...how do you know about that...i mean are u studing about that

[@liuanna3485]

it's single

[@PhenomXz7]

Yeah that’s a mono screw design most likely used for compounded materials from my experience.

[@parmarkajal8322]

Nice infometion video I am tape plant dutec 1400 Opreter

[@MrSakamotothecat]

A giant nozzle that pushes melted plastic through the needle that forms at the end the desired shape.

[@chenjohn3260]

polypropylene sheet and roll manufacturer from Dongguan

[@kultarsingh7450]

i am maintenance engineer in woven sack industry and also involved in erection of woven sack industry mail me if any interested work or join [e-mail] or call [phone]

[@B4dV1d30sSck]

Groeten van Ivo

[@gayungbrayz7683]

Pralon pertama dan terbaik wkwkwkwkwk

[@nuwanpathirajage6102]

👍

[@aworldofstreetanimals4201]

helo

[@jobbetterextrusionmachiner2242]

We are professional in Extrusion Machine.

[@vuvuvu6291]

Remove plastic and put cornmeal instead then BAM! You had cheetos for life

[@dhruvdatta1055]

DUDE

[@familys3124]

Like 👍

[@mr.r7122]

I m a manyu factoring hdpe pipe printing laters

[@user-kc7tg7nv5m]

Krauss Maffei

[@tejasnirapure6886]

Tejas

[@rakeshnag3429]

Rakesh nag

[@kennyisaccs2188]

Y'all ever have to work on one of these in a shitty factory

[@stimpack2112]

@humantorch09 yeh burnt poly on material is a bitch

[@aggabus]

Plastic pellets

[@amirrazor666]

who else is here because of Professor Wilkins?

[@coralyuchina8756]

Hello friend, we are the supplier of PE and PS extruder, you can add my Whatsapp: [phone] so I can send more running vedios to you, tks

[@ProbableEffect]

;d

[@DrMrFran]

nerds

[@Lee-nr5xv]

Well paid nerds.

[@CrispyHulk1]

very nice

[@wiremachineexpert]

Nice