How to safely remove spray-can contents.

[@jmcasler1512]

Next time, put it in the refrigerator to get it cold before opening. That’ll keep more of the gas in solution. Think of it like a can of soda. Warm soda will off gas more aggressively than a cold can.

[@emaglott]

Very interesting! Useful information too. So the bubbling when you got the bottom off the can... I'm guessing releasing the pressure relatively rapidly as you did,the liquid propellant was absorbing heat as it evaporated into a gas. It got the shellac and the can so cold that there was some liquid propellant still in the bottom of the can, evaporating and making bubbles up through the shellac.

[@paulwelkinsdiy]

Thanks for that info. I'm terrible at science and physics.

[@johnhorsfall9623]

Great method. As long as you are careful with the initial incision and use a good quality can opener, this works a treat.

[@ismewhat1234]

Your the man hope you have a great week 🤙

[@williamwelch7]

Thanks Paul

[@dandavis5464]

Hi Paul. I think I'd be tempted to use a can of shellac or Binz primer with a foam brush versus doing all that. Thanks for the info though!

[@VEC7ORlt]

Nice hiss!

[@DeweyKentM]

I think the shellac was just carbonated. When they can it, I think they put the shellac in, seal it, and then pressurize it. Sounds just like how a soda stream works, assuming that’s how they can it.

[@GeomancerHT]

Amazing video, also I got through the rabbit hole researching about shellac haha

[@lynnef3297]

Thanks! 👍

[@pradolover]

Nice one

[@michaelstjohn6086]

What is the cartoon depicting?

[@solocosasutilesparalafamilia]

And... in this position, press the valve, - Is better?

[@paulwelkinsdiy]

up-side-down keeps the fluid from spraying out.

[@solocosasutilesparalafamilia]

@@paulwelkinsdiy mmmm.... you beliebve?

[@solocosasutilesparalafamilia]

@@paulwelkinsdiy To clean the valve, after painting, I turn the container upside down, and only gas comes out

[@ginmar8134]

From above it looks like a soda with a straw.

[@Fumanchuisnotdead]

For what? I dont understand

[@pa_maj.MARTINI-van-MAN]

So he can paint it on with a paint brush inside the caravan rather than spray it on.

[@sportsmobile8328]

Cool Trick👍👍

[@ILONGGOMANUGBONSAI1977]

God bless brother

[@wismuthennecke1808]

👍

[@tinkerfreak4602]

😁👍🏽

[@rohayamohamed7509]

Going to do this with the wd40 spray can that does not spray. Still so much wd40 in there. Thank you.

[@IvoTichelaar]

"I don't want to spray this where I sleep, because I don't want to breathe this shit." Proceeds to hang his head above it while bleeding the gass he doesn't want inside. KZbin in a nutshell.

[@monkeysuncle2816]

Outdoors is a LITTLE less confined than a 50 sq ft camper.

[@IvoTichelaar]

@@monkeysuncle2816 sure, but if he's staying that close and venting the stuff in a bigger batch than he would release by spraying inside, I don't think it's that much more diluted with air. Not instantly.

[@monkeysuncle2816]

@@IvoTichelaar true, and reducing a little inhalation to effectively none would be better

[@paulwelkinsdiy]

In mentioning the fumes I was trying to avoid being around was referring to a corner area in my camper where the paneling has rotted out due to past moisture damage. I know it's not good to be around rotted wood, so this was my idea of sealing that area. Spraying in a small confined area sucks, and the area that I was sealing was a small strip. Much easier to brush on the sealer. No taping no fuss. As to me being over the can, yes, but I didn't stick around once it started leaking. KZbin does have some nutshells but I try not to be one of those guys or gals.

[@613kc]

Than Moves to Chicago to be safe from gun violence

[@maximilian3466]

Promo SM

[@A3Kr0n]

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 🙂

[@littlebitofhope1489]

He's not going to sniff it.

[@pa_maj.MARTINI-van-MAN]

I guess if you can't read the small print, then it's fine 🤣

[@paulwelkinsdiy]

HAH!!!@@pa_maj.MARTINI-van-MAN