What kind of stone panels are those? Exactly what I'm looking for
@PaverToolInnovators Жыл бұрын
instone - Interloc Natural Stone Panels
@DayHiker11 ай бұрын
Save yourself a ton of money and make your own. Some great KZbin videos on this subject, and they are very simple to make.
@nelson3210 ай бұрын
@@DayHiker often money isn't the limiting factor, but time is.
@michman26 ай бұрын
@@DayHiker Nope. These aren't castings. This is a bed of concrete into which stone is mounted.
@FJB202020 күн бұрын
@@PaverToolInnovators Whats the price of those?
@Kushert3 жыл бұрын
Only time will tell if this product holds up. Mortar has done proved itself pretty good
@PaverToolInnovators3 жыл бұрын
This product has had a lot of testing done on it... If I can get a hold of the spec sheet I will for ya... Thanks
@clevewilks4312 Жыл бұрын
@@PaverToolInnovators I own a brick home. Could I do the complete outside of my house with this product if I wanted to. ?
@notimportant3686 Жыл бұрын
@@clevewilks4312 you could, by why would you on a brick home?... maybe do bottom 3 feet as an accent, but anymore than that i think you're just trapping moisture in the brick going forward
@PaverToolInnovators Жыл бұрын
@@notimportant3686 The installation method of Sticky Stone is to use vertical beads 3" apart which allows enough air space for moisture to dissipate. This prevents moisture to build up between the wall and veneer stone.
@PaverToolInnovators Жыл бұрын
@@clevewilks4312 Your brick and mortar would need to be in good shape. Make sure to use vertical beads 3" apart to allow enough air space for moisture to dissipate and to follow all manufacturer's guidelines and recommendations for the best outcome: techniseal.com/pub/media/catalog/product/pdf/t/d/tds_stickystone_can_en.pdf
@kathleenmoore53515 күн бұрын
Thank You ☺️ Ver user friendly
@eliasnull8 ай бұрын
Two years later and this wall still looks like the day it was done when I stop in there!
@oldcolonymasons42029 ай бұрын
Never too old to learn something new or to refresh your memory. Old Colony Masons supports Continuing Education. Thank you for the videos Pave Tool.
@michman26 ай бұрын
Uuum..... You're placing a LOT of trust in the paint on that block. I would have brushed that A LOT, down to the block. The adhesive will stick to the paint just fine. I wouldn't trust the paint to stick to the building forever.
@happyfilmore26472 жыл бұрын
Nice product. I did a project quite a few years . I screwed hardy board to studs then buttered brick veneer with liquid nail and spaced evenly. Then mixed mortar , went through with a mortar bag and smoothed out the joints. Went pretty smooth
@jkmarshall3553 Жыл бұрын
Where would we be without Liquid Nails?
@margerykirner5604 Жыл бұрын
That is amazing stuff! Even the ladies can do this . I love this!
@luisaraujo47084 ай бұрын
Even the ladies can do it? BWAHAHAHAHAHAHAHAHA
@user-jn9lk5fx2r2 ай бұрын
Is there a coping for the top or a drip edge? How do you finish it off?
@andrewshenton65415 ай бұрын
What about painted block or painted concrete
@pamelawilliams2739 Жыл бұрын
Wow you're made my project easy 😊 Glad I came across your channel
@markadler8968 Жыл бұрын
The only application this product is suitable for is the panel like stone you are installing. If you were to use this on a traditional thin stone veneer it would be nothing but a gigantic mess trying to glue each individual stone into place as well as the fact that most stonework requires a mortar joint anyways. Also the way the glue is applied onto the back of the stone allows water to collect in the voids between the adhesive and could be problematic in the future.
@PaverToolInnovators Жыл бұрын
We find that Sticky Stone is the most effective with large format veneer or panel stone. The purpose of vertical beads 3" apart is so that when it rains the water can make its way out from underneath the stone without being trapped.
@dalerounds4036 Жыл бұрын
It looks like a very simple to apply alternative,but even with vertical lines of adhesive I wonder how well it would hold after 5 years of freezing and thawing cycles of here in northern New York Adirondack region?
@Cauthon758 ай бұрын
@@dalerounds4036 Is it really true that the temperature up there gets as low as 52 below zero F? :-)
@ernieforrest7218 Жыл бұрын
Well educate me as to what happens when moisture finds a way to build up between the wall and the veneer stone surface, and then freezes? There are as you know roll on adhesives that are intended to be used as a bonding agent on things like painted block walls so stucco can be applied on those painted surfaces. But dont try that in parts of the country where temperatures go below freezing. Mind you now that drilling a series of holes in solid rock and filling them with water, is a method used for splitting the stone. Such is the power of freezing water.
@PaverToolInnovators Жыл бұрын
The installation method of Sticky Stone is to use vertical beads 3" apart which allows enough air space for moisture to dissipate. This prevents moisture to build up between the wall and veneer stone.
@onetruesoldiervt3686 Жыл бұрын
What happens when the glue expands and contracts due to freeze and thaw does the glue eventually get brittle and lose its hold over time
@ernieforrest7218 Жыл бұрын
Stone, like other things including Brick, is layed in mortar, and lasts for very long periods of time. It also requires well trained people to do it. This type of a product isnt intended to be a long lasting solution, simply meant to look good , be economical, and require less skilled people to install it.
@LilDirt12 Жыл бұрын
Very cool. Your a good teacher.
@Historyprepares6 ай бұрын
I want to insulate my cinderblock first with foam board panels, can I glue to those panels?
@paulharvey99616 ай бұрын
Thank you? Such a great demonstration!! Where can I get those large sheets of veneer stone?
@PaverToolInnovators5 ай бұрын
instone :)
@123jerro7 ай бұрын
Hey guys. If you’re going to use a product like this grab yourself a pair of diagonal cutters to snip the end of the tube instead of a knife like this gentleman used. It’s better and definitely less messy not to mention safer.
@taterstoolboxskates7 ай бұрын
So if we want to apply this to a project house and it has the old 1950 style Hardy type siding can we apply directly to that?
@PaverToolInnovators5 ай бұрын
Stickystone is only as strong as the substrate that you apply it to, so use your best judgement!
@krodkrod8132 Жыл бұрын
I bought some thin flagstone and covered the wooden pillars on the front of my hose. They were normally wrapped with rough cedar boards but after a year they looked like crap. I treated the cedar boards then wrapped over the top with concrete boards then used construction adhesive to attack the flagstone. They slid around a lot but some duct tape worked. It would be nice to have something like this as long as its strong enough.
@PaverToolInnovators Жыл бұрын
Sticky Stone works well with wood and concrete board. The recommendation is to allow the bottom leveling row to cure for 15 minutes and then continue to install the rows above with no delay.
@Womba1009 Жыл бұрын
What happens when the paint peels, will the adhesive that is attached to the paint come off?
@PaverToolInnovators Жыл бұрын
Sticky Stone will last as long as the paint lasts (typically 30 years). For longer lasting application remove the paint to reveal the concrete surface.
@oldcolonymasons42029 ай бұрын
This product might be better than Ardez 77. Cant wait to hear about its longevity.
@BrianMeekins6 ай бұрын
It seems if what you are featuring the stone veneer adhesive. What stone did you use?
@PaverToolInnovators5 ай бұрын
instone panels
@vids595 Жыл бұрын
What product was painted onto the already painted CMU wall? I see the color is different on the lower portion of the wall.
@johngrevas881913 күн бұрын
I have a Basement Project I would like to start this winter. Can I use sticky stone glue / stone veneer on Go Board?
@PaverToolInnovators7 күн бұрын
We cannot promise anything but yes we think it should work fine. Please refer to the user manual for all types of substrates sticky stone works on.
@dogsense3773 Жыл бұрын
I want to used this on the sides of my car so I don't get dents in parking lots
@PaverToolInnovators Жыл бұрын
😂😂😂 Nice one!
@jimm8246 Жыл бұрын
That stuff reminds me of Formstone they used on buildings last century.
@RogerGarcia-cs5diАй бұрын
How much does this cost ?
@PaverToolInnovatorsАй бұрын
Please check out STICKYSTONE at PaveTool.com
@teufelhunden222 Жыл бұрын
I am going to be replacing a vynil siding on the front of my house and I am planning on doing a stone veneer. I like the potential of this product. I am wondering if you are starting from a concrete base to rest the stone on, do you lay a bottom bead? I also am trying to think about how you prevent the gaps that termites find thier way into.
@PaverToolInnovators Жыл бұрын
If you are going an exterior application I would suggest screwing hardie-backer or concrete board to existing plywood and then use a water proofing product (Ardex 8+9 is a good product) and tape and seal of all the seams. So you don’t introduce moister to the plywood. Then you would adhere your stone to this. I would screw a temporary 2x4 on the bottom to hold first rows of stone and remove when you are done.
@bethhixson201710 ай бұрын
It looks like you appled to painted cinder block. Can you use it on painted cinder block?
@PaverToolInnovators9 ай бұрын
Sticky Stone will last as long as the paint lasts (typically 30 years). For longer lasting application remove the paint to reveal the concrete surface.
@user-sp3ou5uh5k Жыл бұрын
Can you install this over brick?
@PaverToolInnovators Жыл бұрын
Yes you can just make sure that the brick surface is clean and not painted
@relax4274 ай бұрын
No wonder it is the greatest since sliced bread. $50 a tube, $100 for the plastic dispenser. Can't even buy it without going through a distributor either.
@relax4272 ай бұрын
Alright all, this is a first to me, but after tracking down a distributor near me, I ordered a dispenser and 4 tubes for a stone veneer job. Figured I'd give it a test. Ended up being 170 for 4 tubes and a dispenser, so actually not that crazy expensive since the dispenser will be used again. Install was painless, went well. Dispenser is actually pretty nice, high quality metal and plastic where it makes sense. Would be awesome if tips weren't used up (sticky stone hardens in the tip- a good cleaning would let you re-use it). Assuming it holds up, I am changing my ways.
@hpain62619 ай бұрын
Update please. Anyone has a photo of that building today and the veneer installed?
@PaverToolInnovators9 ай бұрын
Photos from today 11/15/23 - i.gyazo.com/04a2bdf94ab4540caedd3de29ce3bfb1.jpg
@RVFoodyscomАй бұрын
I'm considering using Sticky Stone. Wi it work on a cured concrete foundation? Mine was poured in 2007, and nothing done to the exterior. How shouldI prep the concrete foundation?
@PaverToolInnovatorsАй бұрын
Just be sure the foundation is nice and clean and you'll have no issues adhering to the foundation with Sticky Stone.
@larrybowden64432 жыл бұрын
I really want to find out more about this product
@PaverToolInnovators2 жыл бұрын
Please give us a call at (860) 870-8665 or email info@pavetool.com and one of our sales associates will be happy to help.
@hycinth5371 Жыл бұрын
Will it hold in cold climate, like MN, WI, etc?
@PaverToolInnovators Жыл бұрын
Be sure to apply in temps above 32 °F (0 °C) to ensure proper curing. Sticky stone is designed to withstand freeze and thaw cycles after the proper curing process has finished.
@royrussell85317 ай бұрын
Can u use sticky stone to adhere exterior foam boards then topped with concrete?
@stevenprendergast9767 Жыл бұрын
How has this sticky stone held up over the past 2 years? I'm coming up on a very similar project and this product seems like a total game-changer for folks like me trying to do a DIY home improvement with no masonry experience. My main concern is that this product is so new and there isn't much information out there about its' performance over time. Thanks!
@PaverToolInnovators Жыл бұрын
We've had this on our building for the past 2 years. We allowed water to go behind the stone for a year to test if the freeze thaw cycle mixed w/ water would have any effect. We were excited to see that the product was so strong, it was still very hard to chisel off. You can use your own judgement but we feel the product has done very well over time.
@stevenprendergast9767 Жыл бұрын
Thank you for the reply, glad it's holding up so far! Is this the primary product you use for most exterior veneer installations now? Curious if there are still use cases where mortar would be preferred (or maybe even necessary). For example, I'm looking to install a stone veneer next to a saltwater pool with some water fall features coming through them. Between the water falls and the location right next to the pool, do you think this would still hold up?
@PaverToolInnovators11 ай бұрын
@@stevenprendergast9767 Once stickystone has cured general watershed will not affect its integrity. As always be sure to do vertical beads so no water collects behind the stone. Good luck with your project!
@DavidLCangelloMDFACSNewYork Жыл бұрын
Might have missed it- may I ask what you prepped the painted bricks with before applying the sticky stone and veneer?
@PaverToolInnovators Жыл бұрын
For testing purposes we pressure washed the painted surface thoroughly to see how it would hold up. We have not had any issues but we would recommend wire brushing the painted surface to confirm that you are getting good adhesion. You have to use your own judgement the stickystone is only as good as the substrate you attach it too.
@DavidLCangelloMDFACSNewYork Жыл бұрын
@@PaverToolInnovators thanks for responding.
@PaverToolInnovators Жыл бұрын
no problem have a nice day! @@DavidLCangelloMDFACSNewYork
@DavidLCangelloMDFACSNewYork Жыл бұрын
@@PaverToolInnovators you too!
@nelsoncody5496 Жыл бұрын
I would redo the video and wear mics to improve audio. It would make the demostration (video) 100X better.
@PaverToolInnovators Жыл бұрын
Thank you for the feedback. We've gotten new Sony Mics since then and use them on all of our videos.
@mainenorthwoodshunter326511 ай бұрын
I want to make a Hearth for my wood stove. I have a 5' by 5' platform and a 5' by 6' back. Will this product work on Rock Board? Wil this product works with the heat of a wood stove. I mean will they start falling off from the back board?
@PaverToolInnovators11 ай бұрын
You can use StickyStone outside the wood stove but nothing inside that will see extreme heat
@coeniebre Жыл бұрын
If use a rubber mulet ( hammer) the tiles wil stick a lot better and you would be able to position the tile a lot better!
@PaverToolInnovators Жыл бұрын
Coenie, Thank you very much for watching the video and for your feedback!
@JustinNoble-cu4zm Жыл бұрын
What’s the Cementitious Waterproofer used in this video? Thanks!
@psu8782 Жыл бұрын
Will this products adhere to ICF walls (EPS foam)? ICF wall will have a waterproof coating.
@PaverToolInnovators Жыл бұрын
Sticky Stone can adhere to ICF walls but we wouldn't recommend using it to apply heavy product. Heavy and light are relative definitions. What type of product are you trying to apply and roughly how much does it weigh?
@danakraemer8512 Жыл бұрын
Not sure it will hold up against the oppressive heat of Phoenix. There are 16 - 20 weeks of oven bake every summer. If it is out side and not made of stone or steel, it has no place in this desert.
@joeparrish927710 ай бұрын
Will it bond to Drylok?
@PaverToolInnovators9 ай бұрын
Yes, it will. But the bond of the drylock to the concrete beneath it is the limiting factor in this application.
@bvon3363 жыл бұрын
pretty rad
@lotsaluck721 Жыл бұрын
How about sticky stone around the fireplace surround . ..and the heat directly above a fireplace
@PaverToolInnovators Жыл бұрын
It can be used on the outside of fireplaces (indoor and outdoor), but not inside fireboxes or for firebrick.
@jtltet Жыл бұрын
Does it come with any kind of warranty against the stone veneer falling off or are there any issues with rain or freezing temps?
@ryanksiazek Жыл бұрын
I was wondering the same thing. Without full coverage of the adhesive/mortar layer water and ice can collect, expand, and cause delamination issues.
@PaverToolInnovators Жыл бұрын
We recommend making the beads 3" apart so water can't collect.
@iamahardscaper3 жыл бұрын
I’m looking forward to trying this product 👍
@PaverToolInnovators3 жыл бұрын
It's Awesome! Guaranteed you'll love it. I like your intro by the way on your videos - did you use Fiverr?
@Mkmike70 Жыл бұрын
Works excellent
@PaverToolInnovators Жыл бұрын
@@Mkmike70 We're glad you like it and thank you very much for the great feedback!
@bryanwoodward6644 Жыл бұрын
Can you only install over a concrete based substrate?
@PaverToolInnovators Жыл бұрын
It can be installed on natural stone, concrete paver, porcelain tile, and wood.
@bobbyhale4599 Жыл бұрын
Will this work on a wet wall? I mean, a block wall that has small leaks when it rains??
@PaverToolInnovators Жыл бұрын
We are unsure of what your scenario is, but as long as the wall is structural/not failing, and you install while it is dry and allow it to cure dry, keep your beads vertical so that water can flow and not build up, you should be ok. Add weep holes if needed.
@carlosyo2011 Жыл бұрын
Can this product be applied to brick, I have a brick home and am thinking about using this with the stone
@PaverToolInnovators Жыл бұрын
It can be applied to brick to work alongside veneer stone. If you aren't referring to veneer stone what type are you referencing?
@sbennet1447 Жыл бұрын
Where can I find details on using Sticky Stone to adhere stone or brick to plywood/zip sheathing ?
Question, I have a pored cement basement with un-even surface that looks like brick. Will or how does it work on that surface ?
@PaverToolInnovators Жыл бұрын
What type of stone are you looking to veneer with?
@maryharris25532 жыл бұрын
Awesome
@PaverToolInnovators2 жыл бұрын
Thank you for watching!
@rhovey10599 ай бұрын
Can this be used over metal lath? I already started to prep for the scratch coat
@PaverToolInnovators9 ай бұрын
Yes we've had customers use it over metal lathe.
@rhovey10599 ай бұрын
Thanks. Bought some yesterday@@PaverToolInnovators
@larrybowden64432 жыл бұрын
I am redoing my indoor fireplace.. how does it work for that. Why not liquid nails?
@PaverToolInnovators2 жыл бұрын
Please give us a call at (860) 870-8665 or email info@pavetool.com and one of our sales associates will be happy to help.
@danpacetti1947 Жыл бұрын
How would you apply to a river rock thin veneer stone ?
@PaverToolInnovators Жыл бұрын
You would apply it the same way as this video shows with a vertical bead from top to bottom of the stone every 3 inches apart.
@jtrotz Жыл бұрын
What brand and model of stone panel was used in this demo?
@PaverToolInnovators Жыл бұрын
We used Interloc Natural Stone Panels produced by Instone.
@dannyvu8304 Жыл бұрын
Yeh try this in Chicago and it might last 1 winter
@PainterD542 ай бұрын
Mortar might weigh more but the cost isn't near what that stuff costs. The gun and only 3 tubes of sticky stone is $136! Kinda spendy. Imagine what a case of it costs?! I decided to go a different route and use Loctite Premium Fast Grab which is plenty strong and much cheaper (using a normal caulking gun)
@PaverToolInnovatorsАй бұрын
Cheap isn't good, and good isn't cheap! We hope it holds up for you... many of the Loctite products do not hold up in freeze and thaw climates, or in wet climates (according to testing we've found on Google). Sticky stone withstands all weather, and can resist over 10 times the weight that cheaper adhesives can. Depending on the project, it is well worth the investment.
@hectorelguerolobo4137 Жыл бұрын
Could it go straight on stucco?
@PaverToolInnovators Жыл бұрын
Sticky Stone will last as long as the stucco. For longer lasting results remove stucco and use stone directly on block.
@davidharenza3862 Жыл бұрын
What veneer are you using on the side of your building? I like that.
@PaverToolInnovators Жыл бұрын
It is real natural stone that is made into these forms so they can be easily installed. Great product to work with the Sticky Stone
@brendantully1950 Жыл бұрын
@@PaverToolInnovators Thanks. But: 1. What is the brand name and 2. Where do we buy it?
@bp4170 Жыл бұрын
@@brendantully1950 Exactly
@michaelphillips9870 Жыл бұрын
@@PaverToolInnovators we can all see that, I think people are looking for some specific information why dodge the question like that?
@sarahdelph4299 Жыл бұрын
@@PaverToolInnovators what is the brand and color of the stone you’re using???
@gaba023 Жыл бұрын
This product would do well in China. In fact it may be manufactured there. Not sure. But when I visited that country, it was very clear that all that mattered was the outward appearance of quality. A real stone/brick veneer has minimum requirements to support the weight. It also has a venting and drainage cavity. So of coarse the traditional method is more time consuming and expensive. As an architect, I would only specify this type of installation in limited areas that were space constrained. In those cases, the envelope consultant would sign off on the installation method - best where there are large overhangs to limit exposure to water.
@PaverToolInnovators Жыл бұрын
Patrick, Thank you very much for watching this video and taking the time to share your input!
@keeperzero5 ай бұрын
I just use Crazy Glue
@brianeng2129 Жыл бұрын
What brand is that veneer would you have a price per sq?
@PaverToolInnovators Жыл бұрын
We used Interloc Natural Stone Panels produced by Instone. You can contact Instone at (708) 371-0660.
@Gumbo310132 жыл бұрын
Where can I get this sticky stone in long beach, California?
@PaverToolInnovators2 жыл бұрын
Hello Eric - There is contacts below the video for ya! It is an awesome product and my stone looks amazing.
@jameschristopher34052 жыл бұрын
How well does this work in regions with freeze thaw cycles, Chicago here.
@PaverToolInnovators2 жыл бұрын
It works very well in all weather conditions!
@jameschristopher34052 жыл бұрын
@@PaverToolInnovators thanks for reply, I will be purchasing a 3-pack and gun. Ill post a follow up
@ricktillotson37132 жыл бұрын
Very interested. Who in Maine carries this? Have 1300 sq ft of natural stone thin veneer to do soon
@PaverToolInnovators2 жыл бұрын
Hi Rick. Please see the contacts below the video in the description - they can help you out!!
@nickfernandez94562 жыл бұрын
Can this product be used on painted stucco?
@PaverToolInnovators2 жыл бұрын
Yes it can be used for this application.
@MrMillrightman Жыл бұрын
Where can I buy the stone you are using?
@PaverToolInnovators Жыл бұрын
look up instone - Interloc Natural Stone Panels
@PounceAnalytics Жыл бұрын
Can this be applied to hardiboard?
@PaverToolInnovators Жыл бұрын
Yes it can be applied to hardiboard.
@endtimes3798 Жыл бұрын
Sticky stone is great but for 80 or more dollars for one tube i will “Stick” with mortor
@reynantelicerio2298 Жыл бұрын
I am installing a ledgerstone on my bbq island will this adhesive work? And also where can I get this product. TIA
@PaverToolInnovators Жыл бұрын
Sticky Stone will work on ledger stone but what specific type of material would you be applying it to regarding a bbq island? We sell Sticky Stone here: pavetool.com/products/techniseal-sticky-stone
@reynantelicerio2298 Жыл бұрын
@@PaverToolInnovators right now i have a cement board around my bbq island.
@PaverToolInnovators Жыл бұрын
@@reynantelicerio2298 Yes that will work but I recommend watching this video where we explain the application on concrete board starting @ 2:10: kzbin.info/www/bejne/oZ_amoGCe7afjsU
@reynantelicerio2298 Жыл бұрын
@@PaverToolInnovators ok. Thank you for the info
@reynantelicerio2298 Жыл бұрын
Where can i get the items? Home depot carry them?
@tdmallet Жыл бұрын
Can this be used on ICF?
@PaverToolInnovators Жыл бұрын
Sticky Stone can adhere to ICF walls but we wouldn't recommend using it to apply heavy product. Heavy and light are relative definitions. What type of product are you trying to apply and roughly how much does it weigh?
@tdmallet Жыл бұрын
@PaverToolInnovators makes sense. Can you recommend "lighter" products for external use?
@PaverToolInnovators Жыл бұрын
@@tdmallet This is the most information that we know at this time regarding ICF block. This is a situation where we don't want to give incorrect information but hope to in the future. I know this might be a little frustrating but hope you understand.
@jordanalexander9869 Жыл бұрын
No way this last as long as mortar and control test are light years apart from mother nature.
@deeruckussolutions8772 Жыл бұрын
😂😂😂😂😂😂😂 ol’ school
@stephencharles1398 Жыл бұрын
The UK is in the caveman stage when it comes to building tech.
@brianladehoff63813 жыл бұрын
What stone product is that?
@PaverToolInnovators3 жыл бұрын
Hi Brian. This is New England Blend Interlocking Panels. We got this from New England Silica in South Windsor, CT newenglandsilica.com/
@alwayssharp3 жыл бұрын
Almost too easy!
@jameschristopher34052 жыл бұрын
Just ordered a three pack with gun.
@PaverToolInnovators2 жыл бұрын
Thank you for choosing Pave Tool Innovators, we hope you enjoy the product!
@user-rl4ow4kh1s4 ай бұрын
Simple and easy at first. A year later, the adhesive failed and the rocks fell off the wall. LOL
@billhickox6396 Жыл бұрын
What happens when you attach to drywall is that you are only attaching to the paper when the paper separates your work will fall off
@Mkmike70 Жыл бұрын
You never stick it to dry wall it will never handle the weight or moisture have to remove the drywall and install plywood or particle board
@PaverToolInnovators Жыл бұрын
We plan to do the test on sheet rock, the paper will peel off the compound if you are installing heavy stone for substantial length, we wont know the exact weight and max height until we do more testing.
@Ryan-ff2db Жыл бұрын
Do not put this, or any masonry product directly on drywall. Drywall is not made this.
@jmatthewssmith Жыл бұрын
But, aren't they just gluing it to PAINT? He just said it didn't stick to plastics! ? So?
@danielconner54762 жыл бұрын
Does this only apply to thin stone veneer?
@PaverToolInnovators2 жыл бұрын
STICKYSTONE™ is perfect for veneering applications on a wide variety of substrates, including but not limited to : -Gypsum boards/ drywall -Wood, pressure-treated wood, and plywood -Brick -Concrete blocks -Cement boards Possible veneer materials include, but are not limited to : -Manufactured, decorative, or natural stone -Alternative masonry -Outdoor porcelain tiles or glass -Wood and composite materials -Concrete pavers
@64maxpower11 ай бұрын
I count the word cementitious water proofer said 27 times
@wric01 Жыл бұрын
Commercially advises you to accept new way, cause it saves time, costs more and promotes repeat customers. Can't have you using time tested cheap mortar and not be a repeat customer.
@PaverToolInnovators Жыл бұрын
If whatever you're using now works and you're content with it, we aren't going to knock it.
@joepineapples933211 ай бұрын
Nope..I've broke down mortar over a hundred years old..a tube o glue ...no..so many problems with that..long term ,won't last,there's no way that's going to last 30 to 40 years
@SomeDumUsrName Жыл бұрын
Yeah....with the prevalent standard of disposable construction, who needs mortar anyway. Anything that lasts 1 to 2 decades is just fine. I can't see this being a product that lasts past that if anywhere even NEAR. Oh...it's "had a lot of testing?" Yeah.....hasn't everything? ;-)
@randyscrafts8575 Жыл бұрын
Lick-n-stick stone like this is great but very expensive.
@PaverToolInnovators Жыл бұрын
Yes, it does cost more than standard mortar but it's the value that you're paying for. The value is in the time saved in mixing mortar as well as the cleanliness with no waste left behind.
@margerykirner5604 Жыл бұрын
I doubt is this product will fail Have you ever stuck anything with Gorilla glue! It never comes off😂
@PaverToolInnovators Жыл бұрын
Yes, it's a strong product for sure. As you saw in the video, we've used it with veneer stone on our own building (goes through freeze and thaw cycles), and has remained durable and resilient to this day!
@jbshaka653 Жыл бұрын
How many of ‘them’ steps….? Really?
@DayHiker11 ай бұрын
Sticky stone in a tube will cost you about a dollar per square foot. So, $1.00 x 20,000 feet would cost about $20,000. Holy crap this stuff is expensive. Also why the hell would you adhere it to Tyvek? The weight of the stone will in time start to pull off the Tyvek along with it.
@PaverToolInnovators9 ай бұрын
This is a specialty item, we are seeing our customers use it on smaller veneer projects, where time saving and avoiding a large mess is worth the investment. Studies show StickyStone is up to 50% faster to install than using mortar. Calculate your labor cost and see if it's worth the extra investment.
@Ryan-ff2db Жыл бұрын
The biggest problem I see you guys facing is that any new construction and in particular commercial construction has engineering specs. You must follow the installation requirements or you will be in some serious trouble and to date I've never seen a spec call out for this type of adhesive. There will also be hesitation on unproven technology. I've been bitten myself with manufacturers claiming there product is great but having it fail later. I had this happen about a 2 years ago with a new firebrick adhesive. Fortunately, the general contractor provided the adhesive and I specifically detailed in the contract that we were not responsible for it. Less then a year later it failed, badly. Not saying this will happen with your product but there will be an uphill battle to convince old school masons and engineers.
@PaverToolInnovators Жыл бұрын
Hello Ryan, You make a fair statement and I'm sure that was an unpleasant experience for you. Techniseal is a company that has been around since 1984 and their products have proven themselves. Please visit this link for their full specs/test methods: techniseal.com/pub/media/catalog/product/pdf/t/d/tds_stickystone_60050572_us_en.pdft
@Ryan-ff2db Жыл бұрын
@@PaverToolInnovators I might try it out for some smaller projects and repairs see how it works but on larger projects you pretty much have to follow the installation method described by the engineer/architect. If you guys could get more companies to specify your installation method maybe it could be a snowball effect.
@PaverToolInnovators Жыл бұрын
@@Ryan-ff2db Sounds good. Feel free to keep us updated on what you find. We will definitely be doing more in-depth videos in the future. Thanks again for the input it's much appreciated.
@waytospergtherebro Жыл бұрын
Two angry guidos.
@markarcarisi72758 күн бұрын
You should never apply stone veneer to painted block wall.
@PaverToolInnovators7 күн бұрын
We cleaned the surface and wire brushed in areas of concern. It is still standing strong over 3 years later. Check out our recent update video where we chip a piece of the veneer off the wall. The sticky stone eats through the paint and bites into the CMU
@aag6499 Жыл бұрын
That old man talk as is the people don't know $#!+
@user-xs8kd7cs3i Жыл бұрын
$20 it’s a joke I’m looking to buy $60 dollars apiece
@g.b.5206 Жыл бұрын
Very little waste but 3 times the money LOL
@PaverToolInnovators Жыл бұрын
Yes, it does cost more than standard mortar but it's the value that you're paying for. The value is in the time saved in mixing mortar as well as the cleanliness with no waste left behind.
@joepineapples933211 ай бұрын
That's EXACTLY the same caulk gun hyrda blok had for their shower system, now they sell regular caulk tubes....there is no way this works long term..unlike these guys i'm a licensed contractor who's being doing masonry for 35 plus years..you do not have to wait for your base course to set up to set veneers...shamwow horseshit
@stupendas101 Жыл бұрын
This stuff is a joke. Locally it is $26 per tube or just shy of $30 with tax. $312 for a case of 12 plus tax. Maybe the manufacturer thinks they are selling gold and silver in a tube. You can do this with pure Silicone and still save 50% and Silicone will be there for 100 years. I asked the local guy at the store if he sells a lot of this stuff and he said I have not sold a single tube so far
@PaverToolInnovators Жыл бұрын
If what's working for you satisfies your needs we aren't going to knock your procedure. Sometimes change isn't easy or necessary. We wouldn't sell a product that we don't stand behind and can assure you Sticky Stone lives up to its name.
@keithboyd1157 Жыл бұрын
Yet another product that puts a nail in the coffin of Traditional masonry and the mason's skills. All this product does, is dumb down the mason's art. This is for people who want to do everything the lazy way. I guarantee this will look like crap within 5 years. Whereas the coliseum, the houses of Parliament, The White House and Senate, will be there long after this product fails. This product suits those kinds of builders who want to build cheaply and don't care about the product's maintenance or shelf life. It's up there with the faux screw on stone panels cheap builders use. Thanks for helping to kill the masonry trades.
@PaverToolInnovators Жыл бұрын
We appreciate your input. At the end of the day if you're content with what you're using for applications, we aren't going to knock you.
@margerykirner5604 Жыл бұрын
Everyone must move into the future! There will always be plenty of room for our amazing masons!
@keithboyd1157 Жыл бұрын
@@margerykirner5604 You want to move into the future, but you revere the buildings of the past. How are you construct new monuments for future generations to admire if they're all built with false stone and glue? The reason America's old buildings have survived, is because they were built using traditional methods, not crude money saving methods. You don't see the Coliseum, the Houses of Parliament, nor the Washington memorial built out of false stone and glue do you?
@margerykirner5604 Жыл бұрын
@@keithboyd1157 I am about to start a faux stone project. I do see what you are saying, but if we all thought like you, then we would be tripping around in horse drawn vehicles. Love the art in the ancient buildings , but we can create these looking into the future.
@keithboyd1157 Жыл бұрын
@@margerykirner5604 I'm not sure where you draw the inference from my previous replies, that I want us to go back to the horse drawn carriage days, although to save the planet that might not be a bad idea. I'm saying that these kinds of temporary, short term profit making ideas, don't last and are not designed to. If America spent more time rehabilitating its old buildings, instead of knocking them down and replacing with them structures that don't last 50 years, then you'd all be better off. My company specializes in Historic Masonry repairs, using traditional materials and methods. If those skills are diminished by these faux/false products, how do you pass the skills that took years to learn, down to the next generation, to preserve those buildings you deem worthy of keeping? One thing we have noticed, the repairs we're called on to do are for buildings much younger than they used to be. Instead of repairs to structures built in the 18800's/ early 1900's, we're increasingly getting called upon to repair structures built in the 1970's onwards. For us to be called upo0n to rep[air a structure that is less than 10 years old, is a sure sign that traditional skills are being lost, and replaced by people who only know how to build in faux.