Pavo25 HDZero Build | Modern Frame meets Modern Electronics

[@bugsy742]

Maaaate talk about great timing 😃 I’ve got one on the way you ABSOLUTE bloody legend 😎🤝🤜🏻🤛🏽 Can’t tell you how happy I am! 😅🤗

[@OneManUnmanned]

Sick.. thanks man. Was a smooth process once you lay everything out. Thank you 😊

[@bugsy742]

@@OneManUnmanned ahh your a legend mate ✊🤜🏻🤛🏻

[@GatAppTechnologies]

awesome build.....just got this frame and looking forward to building it out.....going to go with walks nail HD since that's what I use.

[@OneManUnmanned]

That's Awsome..I just received my Walksnail system as well. Should be fun getting that up and running.

[@bobbylefebvre6298]

Really nice set up

[@OneManUnmanned]

Thanks!

[@erikvf7]

Very nice review and very detailed step-by-step! Have you done some tuning on it?Maybe that could help with the jelow in the HDzero camera, or maybe trying to loose the FC board a bit, to filter some from disturbing the gyro.

[@OneManUnmanned]

Thanks man...I have not done any tuning to it, and good observation on the HDZ footage. It shows up in the FPV feed, but nothing in the HD camera. It's something I will mention in the 1st Flight review, but still interesting nonetheless.

[@bobbylefebvre6298]

Good morning cool drone nice review

[@OneManUnmanned]

Thanks Bobby.. It's really a nice design, especially for repairing.

[@DimmyV]

Mate nearly 2k, lets go

[@OneManUnmanned]

Haha.. I'm trying. We'll get there eventually. Thanks!

[@DimmyV]

@@OneManUnmanned I remember when you were below 1k. Making it possible. I really need to prioritise youtube got a complacent. Also this is your second drone you built?

[@OneManUnmanned]

I appreciate that.. Yeah, it was not long ago I was at 300Subs. It's a roller-coaster, and some months are better than others. Knowing the purpose of your channel made a huge difference for me. I don't remember if this is/ was my 1st build. I've definitely repaired some other drones.

[@DimmyV]

@@OneManUnmanned yeah that’s what I’m struggling with but I have some videos to edit and just get content out again. Can’t wait to join you in the FPV world. Hopefully orders arrive next week

[@OneManUnmanned]

Yeah Bro, we're happy to have you in the FPV space. I'm sure you've seen the Avata and goggles V2 leaks this past week. It might be released later this month. You can always DM me on IG about your Channel(I'm no pro obviously).

[@RealAmayaKami]

What kind of drone is this I like how the props have a ring around them to protect them and can I buy one like this pre built?

[@OneManUnmanned]

Yes, it's called a Cinewhoop, and it's designed specifically for that purpose, and to protect the subject from the propeller blades. It does come pre-built. You can find it here: bit.ly/39NkQRm

[@RealAmayaKami]

@@OneManUnmanned thank you I appreciate it

[@RealAmayaKami]

@@OneManUnmanned hey I have a question I have the tinyhawk 2 emax right now and my emax 450m ion battery got swollen and I looked it up it says not to use it. Ordered another few batteries and now one of them never charges? I'm not over charging or anything so is there something else I could be doing wrong or am I just really having bad luck and getting bad batteries?

[@OneManUnmanned]

Battery maintenance is a tricky topic as people use them in various ways. Flying your drones down to 3.5 volts is the best way to preserve your batteries. Anything lower and you could be doing damage. As far as charging, the best practice is to charge at 1C (the amperage that's printed on the Battery). For example an 850Mah battery should be charged at .85amps. Besides that, charge to 4.2 volts for LIPOs and 4.35 for LIHV.

[@RealAmayaKami]

@@OneManUnmanned thank you

[@JonnyClark]

keep grinding ! love your videos man. Don't give up ! just subscribed

[@OneManUnmanned]

Thanks Jonny! 😊

[@RealAmayaKami]

Hey I was wondering if you think it's possible to spray paint my props? I have the tinyhawk 2 freestyle and the avan rush props don't come in different colors and I was curious if I could spray paint them?

[@OneManUnmanned]

You could, but I would not recommend it. The props are designed to clean, and any imperfection can affect your thrust/lift performance and even cause vibration in your drone.

[@RealAmayaKami]

@@OneManUnmanned oh really ok well thank you for reply

[@Thrallorc17]

Hello, nice video :) How you welded the motor connector to the flight controller ?

[@OneManUnmanned]

I show you how at 09:50

[@raceprofpv6687]

Isn't the whoop vtx only made for 3s voltage? or can I run 4s on my build?

[@OneManUnmanned]

2-6S. The manuals for the VTX can be found here and gives you all the recommendations for Voltage and current draw. www.hd-zero.com/document

[@bobbylefebvre6298]

Its a like a pusher drone

[@crash_lander]

Dude you ruined the power lead. That’s one sad thing u did

[@OneManUnmanned]

How was I supposed to extend it?

[@crash_lander]

@@OneManUnmanned Solder on longer power cables from the plug to the AIO, instead of extending. It’s additional hassle but no joints on power leads, never ever!! Sorry for being such a critic ✌🏼. Nice video and lots of info. Noticed jello in the FPV feed. Must be coming from the frame being rigid mounting the camera. I’d suggest try the factory cli, may be it will help get rid of that jello. 🫡

[@OneManUnmanned]

I appreciate it..I did not have another lead and the provided lead had a built-in capacitor(was not going to run it without a cap). The provided battery lead was simply just too short, especially for this kit. The jello is very noticeable and I will mention it in my flight review. I don't know if it's the stiff frame or just the way HDZero picks up vibrations. The drone is and was on the factory CLI. I was hoping for less jello in the FPV feed, but the HD recording is smooth at butter. 👍