I love using Matek equipment. Always works and their documentation is second to none.....
@aurelienclair44654 жыл бұрын
Yeah I'm a Matek fanboy for all my wing . Never an issue.
@markschmidt67375 жыл бұрын
Would love to see you do a video on using it with crossfire to prove or disprove that they are or aren’t compatible this would probably help a lot of people
@brubakerjm5 жыл бұрын
So glad Matek is bringing this out. Appears to be a quality piece of equipment. Excited to see an air test when the opportunity comes.
@kral59325 жыл бұрын
Thank you for these tests! I am extremely excited for some new 1.3 gear finally!
@MCsCreations5 жыл бұрын
Pretty impressive, Pawel! 😃 Thanks a lot for testing it!
@VincentFischer5 жыл бұрын
I really can't wait until they announce the price
@photonthief5 жыл бұрын
I'm really excited for this one!
@putimir5 жыл бұрын
Thank you for that Pawel, but please please, put this thing now on a wing and fly out some long range distance, like 15+km...Do you have also some CP 1.2/3 antennas to compare?
@AlexanderPerez-oe1gu5 жыл бұрын
Hello and thank you for posting this. I have been a long time Matek user and hands down always trust their gear. More than anything, their support is solid! Have you done any further testing with this? Any actual flight/range tests? I'm considering purchasing it.
@BuZZarDFPV5 жыл бұрын
Cant wait to order mine, thanks for doing such awesome reviews on the product. Really looking forward to the FPV flight. Don't forget your notch filter ;)
@GOOD-ss1dq4 жыл бұрын
Can we use the equipment that you used for the live view through the wireless camera
@mattsmith48435 жыл бұрын
This is great news, thank you for testing this PS
@philthayer40875 жыл бұрын
Do you think I could use this reliably with my R9M system? Thx for posting!
@GOOD-ss1dq4 жыл бұрын
Can you say what is the material that is used with receiver .I have to buy
@neilfpv3 жыл бұрын
I saw a post in TeamBlack sheep about 1.2Ghz vtx which is why I searched youtube and found your video. When I started fpv 1.5 years ago, what I only know about vtx is 5.8Ghz. Is there advantage of using 5.8ghz vs the 1.2Ghz? It looks like 1.2Ghz is really good for piercing walls.
@zenm81905 жыл бұрын
What is the reason that we use 5.8 over lower frequencies then? Cheaper transmitters? Higher bandwidth? Less restrictions? Smaller antennas? If you had the ham license required and so on is there any good reason to use 5.8 over this?
@angelisfpv5 жыл бұрын
Do low ghz rather than 3.8 have better range?
@christopherstarzyk92095 жыл бұрын
Yes 1.2 is better than 5.8. Since its putting out more than 600mw, that is more than enough for some serious long range flights, especially if you use a high gain ground antenna.
@Nousernameization5 жыл бұрын
@@christopherstarzyk9209 Does it have a better penetration behind trees? How about concrete building?
@christopherstarzyk92095 жыл бұрын
@@Nousernameization Yes much better penetration through objects.
@kral59325 жыл бұрын
@@Nousernameization Yes, and it can even go behind concrete buildings! 400mw went through 6 detached houses in my testing!
@EnglishTurbines5 жыл бұрын
Low frequency = Long range, it's why 5.8g is so terrible.
@wesleycallahan86285 жыл бұрын
Any idea on pricing or a release date yet? Do you have any idea if they would ever make a 1.2/3g diversity goggle module? I’m not sure if the hardware size can support it but, that would be awesome.
@jessemonkeyjones49595 жыл бұрын
Do you know a release date?
@FPVUniversity5 жыл бұрын
Late November
@cabecinha695 жыл бұрын
@@FPVUniversity thanks
@alasdair41615 жыл бұрын
Pawel, does your power meter work with 5.8gHz transmitters, especially at the upper end near 6gHz? The specs are typically Chinese ambiguous, Advertising says 1-8gHz, the specs state it measures up to 5gHz... I hope they release a lower power version of the transmitter. I get 30kM with 150mW and nothing onboard gets interfered with, for me 1 Watt is just a waste of energy at 1.2gHz, and will cause more problems with GPS, servo's and some FC's. Power control would be too much to hope for.
@southwestkittyit5 жыл бұрын
Nice job Matek.
@lucbisschops4 жыл бұрын
He pawel, i got a dockking and a 1G3Vrx matek one, but the matek has 10 pins and the dockking only 9 holes, how do i overcome this?
@FPVUniversity4 жыл бұрын
really? Just plugged one into the other and it worked. Maybe by accident? I wil have to count the pins
@lucbisschops4 жыл бұрын
@@FPVUniversity got it, sniped the top pin S2
@dj_dazzy5 жыл бұрын
Doubt if this is legal to use in the UK, is it in Europe?
@bassohollic5 жыл бұрын
Any issue/interference with R9M 915mhz radio? I am not an expert at radio stuff but I know they have low loads filters one can buy but some transmitters have filters on them. Have you had any issues with 915? I also run RFD900X's
@piranha325 жыл бұрын
Re legality: AFAIK 1.2G fpv band is not open for unlicensed use anywhere in the world. However, some of the 1.2GHz channels are in the 23cm ham band. With a suffient ham license you should be able to use it in any country, which has reciprocity agreements with the country where you are licensed. In Poland you will need a category 1 license (higher class), but in US technician license (lowest class) is sufficient. Anyone with EE background should be able to pass the exams after spending just a bit of time on getting familiar with regulations. Using the vtx without a license is just a matter of luck. If you don't step on anybody's toe, you should be fine. However, with a bit of bad luck you may end up with equipment seized by the authorities and a fine to pay.
@petersargent41385 жыл бұрын
Looks great. Do you know if it'll be available this year?
@DroneShotFPV5 жыл бұрын
Should release mid November, close to November 25th
@KwadSquadFPV5 жыл бұрын
did they give a release date yet?
@DroneShotFPV5 жыл бұрын
Mid November, around November 25th or so
@51im5 жыл бұрын
Have you got any idea if they will be releasing a 2.4ghz vtx. That plays nicely with crossfire.
@EnglishTurbines5 жыл бұрын
Why..?.. you can use 1.2g alongside 868mhz or 915mhz...I do, no problem...2.4g will be inferior and als prone to RC transmitter interference.
@51im5 жыл бұрын
@@EnglishTurbines I've read that 1.2g alongside 900mhz can cause issues. How true that is I've no idea. 2.4 tx interference is not a problem. We are all on xfire. Also the l.2g antennas are ridiculously large.
@EnglishTurbines5 жыл бұрын
@@51im You need to do some homework...I fly UHF alongside 1280mhz video...I fly R9M system on 868mhz alongside 1280mhz video...No problems whatsoever, no RF filters, just a little antenna separation...I even have it on a 5 inch quad....1.2g antennas are not huge, in fact smaller than your crossfire Rx antenna (it's a Dipole)...I only need a Dipole on my vtx, NOT those rediculous Skews...Not needed on such a low frequency....200mw....8kms, no problem, clear image and no flying on the edge of space either. Golden Rule, your video frequency should always be higher than your control frequency.
@51im5 жыл бұрын
@@EnglishTurbines Yeah I suppose dipole is the way to go. I've had 5k on 5.8g at 200mw. But I've already got a 2.4g diversity Rx that I'd like to make use of. Anyway why not have the option of 2.4g. more choice is more better.😆
@EnglishTurbines5 жыл бұрын
Doubtful, it's not popular as a video frequency, it also lacks the range of 1.2g. 2.4g video has been around ages, Immersion do one, never caught on really.
@jwtfpv89575 жыл бұрын
Channels/frequencies?
@abhilashm67114 жыл бұрын
We are some of students planning to design and develop a drone delivery system , can you little help us by your knowledge!?
@waldemarkraus28555 жыл бұрын
Pure insanity. That should be enough for 50+km
@smooth_ops29425 жыл бұрын
Farther than that 👍
@Monzilla645 жыл бұрын
Well Pawel, now that comes out I buy it. But you have to study how to do with iNAV to mount a FPV Ground Station. If you succeed in this you have solved many problems that free us from buying very expensive components. Great Matek!!!
@smooth_ops29425 жыл бұрын
No need for ground station just put module in you fat sharks.
@SvPVids5 жыл бұрын
do the range test already
@dennyrowland5 жыл бұрын
It would be great if one could find a stockist who has it....
@IanF-FPV5 жыл бұрын
Guess analog video really isn't going anywhere. You are not getting the same range as 1.3ghz using the DJI system....Crossfire and 1.3ghz ftw..
@per_9395 жыл бұрын
Yes, yes, yes...
@bren420695 жыл бұрын
I'd love to fly 1.2ghz
@EnglishTurbines5 жыл бұрын
1.2g....So much more sensible than insane 5.8g...I stopped using 5.8g...I wish you had zoomed in on that vtx frequency list...😒😒😒