INAV on 7-inch quads | the best settings

[@FPVUniversity]

The sexy 7-inch long-range FPV frame bit.ly/399eEil All the best features of INAV 6 kzbin.info/www/bejne/ZqimZXRqaZuZaK8

[@janernstd9842]

Nice tutorial video. INAV 6 on 3 inch - the best settings next :)

[@MCsCreations]

Thanks for all the tips, Pawel! 😊 Stay safe there with your family! 🖖😊

[@FPVUniversity]

My pleasure!!

[@AsgardStudios]

Great video. BTW, I really like your new branding. Well done!

[@FPVUniversity]

thanks

[@k5utc]

Well done as always Pawel, appreciate all your efforts.

[@FPVUniversity]

Many thanks!

[@jplo5299]

Thanks for the detailed explanation and tutorial for the larger quad builds. Czysty jak łzy..or as clear as snow as in this case and time over here! :)

[@FPVUniversity]

My pleasure!

[@Virtuonaute]

Thanks Pawel! I jump from 5.1 to 6 with my 7" and some of my filters and mechanics settings were completely off!

[@FPVUniversity]

Glad it helped!

[@sergiirizvan4669]

Hi Pawel. Thanks for all the tips provided. They are very useful! I want to ask, are there any videos showing the process of tuning PIDs and filters based on black-box data? I really want to understand the whole process from start to end, but it is still not clear to me. And the second question: are there specific important differences in settings for a 10-inch quadcopter compared to a 7-inch?

[@sams9716]

Nice video. Wish I could get my blackbox to work. Tried all the "tricks" to get it to work but out of 4 SD card blackbox's I have only can get 1 to work.

[@12Fly_ussr]

Большое спасибо за труд! Подскажите, RPM фильтрация на inav 6 работает? Thanks for great job! Is RPM filtration working?

[@wingsmh27]

Are there any major changes We need to make a 10 inch quad

[@Tonynux]

Hi Pawel. Good explanation. I'm going to migrate my 7" from BF to INAV. Just a question: is the RPM filter the same we have in BF? So should I enable some bidirectional DHOT?

[@Solomonkein611]

Pavel, what gyroscope filtering settings do you recommend for 10-inch propellers?

[@kvstepanoff]

+1

[@wojciechantoniewicz6302]

Very helpful video. Merci!

[@FPVUniversity]

Glad you think so!

[@dcliffe8539]

hello from Queensland

[@ryanomoso7173]

Is this also applicable for 8inch quad like the mario fold 8?

[@redogg2749]

Would this be the same filtering settings for a 4 inch drone.? It came with 2d matrix active not 3d matrix can I change it to 3d for a 4 inch.?? ❤️ your channel 💯

[@assimeon]

Hello and thanks for that video! in this last update I can't find the flight controller loop time. Also I cant find it in cli. can you help me?

[@J.S-g6j]

What configuration should I choose for 6-inch propellers? @1:18

[@adamseal]

Hi Pawel the question is not related to the video, Is that possible to swap the internal 4in1 mp module to elrs on radiomaster tx16s mk1😀. If so how do I do it, I have external micro crossfire which don't want to remove and I'm not using internal module at all so I don't need it.

[@fpvkabo]

Any changes for a 8" or 9.5" (dji props) or 10", I got all my big qauds on iNav or Ardupilot? or point me to iNav docs !

[@khemrajdeulkar9803]

Pls make a video on 5inch quad with inav 6 With gps position hold

[@theinventionshow]

Does the 7inch presets works for an 8inch too?

[@FPVUniversity]

Yes, but you might have to lower gyro LPF a little

[@theinventionshow]

@@FPVUniversity is 80hz a good starting point ?

[@donatasr]

Unfortunatelly my chimera 7 on inav 6 became shaky in just cruising not oscilations, no same issues in latest BF release. On inav 6 7 inch preset looks like wind distrubances affecting on the wing

[@donatasr]

And other are complaining about 7 inch preset on 6 inav version

[@SkyrisUK]

Any obvious settings to change or look out for on a 10 inch 6s build ?

[@FPVUniversity]

mostly lower LPF even more. I'd say even down do 65-70Hz

[@alexm328]

What is parameter nav_mc_althold_throttle

[@FPVUniversity]

all settings are described here github.com/iNavFlight/inav/blob/master/docs/Settings.md

[@carlosfuhrer]

Hi pawel is it ok to use a diff from inav 6.0 RC 1 to INAV 6 release? my 7 inches is using the release candidate of Inav 6 and i want to use the full release version

[@FPVUniversity]

yes, absolutely

[@peter1200]

I decided to move from betaflight to inav 6 for a more long range exploring experience with my 7 inch drone. The flight controller is a speedybee f405 v3. I couldn't get the motor protocol to work so had switched back to Betaflight. Is this a common issue or did I do something wrong?

[@Meleonlight]

common issue with the v3, v4 it´s ok.

[@alexandrpanov9110]

Dzien dobry, from Ukraine!) Can you please help me. I have iNav 6.0 on SpeedyBee 405V3, and on S5 and S9 I got servo devices. But I can not setup up them in iNav, because it not see them. On Betaflight everything working. May be some advise from you. Thank you)

[@Solomonkein611]

INAV, DSHOT can not work on S3, S5,S7 because of DMA clash, pls use ONESHOT or MULTISHOT and calibrate ESC PWM range. Это 405 TE от matek, похоже общая проблема 405-тых. И не пи*ди что по русски не понимаешь.

[@user-yemen711]

10 inch

[@tarkdemir5188]

Please stop the inav update. Because every update other features are lost.

[@tomjenson9053]

Like what?

[@tarkdemir5188]

@@tomjenson9053 Arm and angle mode not working same channel.

[@tomjenson9053]

@@tarkdemir5188 I have 7 modes on a single channel and they all still works for me in 6.0.0. You can always stay with 5.1.

[@tarkdemir5188]

@@tomjenson9053 I already installed 5.1, still not working with same channel. This is very ridiculous as acro mode works but angle mode doesn't with arm.

[@jzflmr6089]

How about 5" can i use some of this settinggs or its just for 7inch?

[@FPVUniversity]

no, those settings are for 7"

[@devilsreject78]

I have inav 6 on a long range seven inch drone and I love I have six it is the best versions so far however I cannot stand my seven inch drone