How to Make Knobs on the CNC

  Рет қаралды 2,582

Paw Paw’s WorkShop

Paw Paw’s WorkShop

Күн бұрын

Пікірлер: 7
@PawPawsWorkShop
@PawPawsWorkShop 6 жыл бұрын
For all those that were asking for the design of the knobs. I added a link into the description for the layout and drawings. They are in the Inventables project area. With the free Easel Software you can use this project on your machine. Good luck in your projects.
@sidknowles4752
@sidknowles4752 6 жыл бұрын
Great tip will be making knobs later thank you.
@PawPawsWorkShop
@PawPawsWorkShop 6 жыл бұрын
Sid Knowles . Thank you. They are fun and easy to make.
@rega3160
@rega3160 6 жыл бұрын
Great job Paw Paw.I’ve made knobs similar to these but I used my band saw. As you would suspect, making a knob this small was very difficult with a lot of clean up. Thank you for the idea.
@PawPawsWorkShop
@PawPawsWorkShop 6 жыл бұрын
Thank you, your right, this is much easier than trying this on a band saw. Once you have the design, it is easy to scale it larger or smaller depending on your need.
@Olivsam
@Olivsam 4 жыл бұрын
Thank you I will be making some for a stop block fence. Why didn't you have the cnc cut the hole for the bolt? Was there a reason you used the drill press instead?
@PawPawsWorkShop
@PawPawsWorkShop 4 жыл бұрын
The 1/16" bit does not work well going that deep into the material. I could have set it up on the cut out portion but did not think of it at the time. Will have to do it.
How to Use an Old Cell Phone to Monitor the XCarve for FREE
4:03
Paw Paw’s WorkShop
Рет қаралды 721
[DIY] The easy way to make hexagon knobs/ Making Star Knobs
9:39
enjoying woodworking / 즐기는 목공
Рет қаралды 228 М.
Жездуха 42-серия
29:26
Million Show
Рет қаралды 2,6 МЛН
SLIDE #shortssprintbrasil
0:31
Natan por Aí
Рет қаралды 49 МЛН
요즘유행 찍는법
0:34
오마이비키 OMV
Рет қаралды 12 МЛН
HOW TO MAKE A MULTIPLE STAR KNOB JIG | A MUCH EASIER PROCESS
19:55
I SIMPLY BUILT IT
Рет қаралды 143 М.
How to Use the Box Maker and the BoxMaker Classic Apps in Easel
46:38
Paw Paw’s WorkShop
Рет қаралды 36 М.
Making Knobs On A CNC Router
14:54
Mark Vinciguerra
Рет қаралды 2 М.
HOW TO make a puzzle - Easel CNC Project
14:25
SethCNC
Рет қаралды 13 М.
Building precision machines is simple, until it isn't.
39:53
Not An Engineer
Рет қаралды 430 М.
Transforming A Stainless Steel Bolt Into A Fully Functioning Miniature Lathe Chuck
28:44
Make Star Knobs With The Knob Jig ➲ DIY WoodWorking For Aug16
6:24
DIY WoodWorking For Aug16
Рет қаралды 56 М.
Inlay vs Marquetry
17:26
Ramon Valdez Fine Furniture
Рет қаралды 27 М.
4 Tip, Tricks, and Hacks for using Inventables Easel
13:15
Further North Fabrication
Рет қаралды 114 М.
Жездуха 42-серия
29:26
Million Show
Рет қаралды 2,6 МЛН