180mm fans are the heart of this case! should have invested in another case lol
@TerHorstCustoms4 ай бұрын
I understand we're your coming from but that was not a option for this build. Nevertheless, still does it's job.
@godnamedtayАй бұрын
It’s his build, who gives af. It looks completely perfect and guaranteed to look better than whatever tf u have on ur desk. If not, prove it or shut ur mouth.
@ggrlmonАй бұрын
@@TerHorstCustoms I saw a guy on youtube he replaced the bottom fans with the 180mm fans and used one of the 140mm fans as an "exhaust". I actually have the same case and I'm planning to buy aio cooler myself, but struggling a bit to understand how to properly mount everything. The editing looks really greate mate, I just wished you would've gone in a bit more detail, or maybe do you have the full vid of this?
@TerHorstCustomsАй бұрын
@@ggrlmon The 180mm fans in the bottom should be possible. This is the only video I have made of the system as it was more a showcase then a tutorial or something. The Torrent manual (www.fractal-design.com/app/uploads/2022/12/Torrent-manual-v.1.1.pdf) is good at showing all the buliding steps that would be needed, even the AIO in the front with bottom 180mm fans and rear 140mm fan on page 8.
@TerHorstCustoms28 күн бұрын
@@ggrlmon Thank you, unfortunately this is the only content I made around this.
@raduadrian.c55038 ай бұрын
This is a really impressive cable management! Great work!
@TerHorstCustoms8 ай бұрын
Thanks!
@Sk4tt Жыл бұрын
Damn, bet he’s going to be very pleased with that! Awseome build.
@TerHorstCustoms Жыл бұрын
Thank you Skatt!
@kensg10 ай бұрын
WOW..the colors and the system looks Awesome.
@TerHorstCustoms10 ай бұрын
Thanks
@ashleyjaytanna1953 Жыл бұрын
Not sure about but awesome build and fantastic cable management. Production quality and chill vibes.....👌👍
@TerHorstCustoms Жыл бұрын
Thanks :D
@reallukkiАй бұрын
4080-powered necromancer, can't wait to see it in action
@TerHorstCustoms28 күн бұрын
All the power :D
@Uberfriedcookie7 ай бұрын
What vertical GPU-mount are you using in this build?
Where do you get that bottom fans cover? 1:04 And side cover ? 1:14
@TerHorstCustoms6 ай бұрын
I made those myself with some acrylic and vinyl wrap.
@zomekmcqueen26346 ай бұрын
@@TerHorstCustoms is there any chance you have 3d model of that? So i can print it out 🙂
@TerHorstCustoms6 ай бұрын
@@zomekmcqueen2634 I do not, as these where just made on the go.
@raduadrian.c55038 ай бұрын
Looks amazing! Is this the black or gray version of the case? Thanks!
@TerHorstCustoms8 ай бұрын
Grey
@edisyo Жыл бұрын
Looking awesome! What are cpu and gpu temps under heavy load? And is the AIO in pull or push mode or mixed? :)
@TerHorstCustoms Жыл бұрын
Thanks, CPU max 71c on a full system stresstest, GPU 66c with 26c room air temp. AIO is setup in push mode.
@edisyo Жыл бұрын
@@TerHorstCustoms Wow thanks for the nice response! 🤟 Really like your builds, for sure earned a sub
@francisdumlao804011 ай бұрын
Is it possible to do a push pull on the 360
@TerHorstCustoms11 ай бұрын
@@francisdumlao8040 With the exact GPU installed or in general?
@francisdumlao804011 ай бұрын
@@TerHorstCustoms I got a 4090 and im thinking of swithing into this case . I would still want an aio with it but on a push/pull configuration.
@bruv80503 ай бұрын
can you please tell me from where you got the vinyl sticker. it looks so cool i want the same one
@TerHorstCustoms3 ай бұрын
That was done by gografix (instagram.com/gografix/)
@gezakerekes10079 ай бұрын
@TerHorstCustoms I love this build, very clean and nice! Grats! Could you send me the dimensions of the panels that cover the wires?
@TerHorstCustoms9 ай бұрын
Unfortunately not as I free handed those and didn't write down the dimensions when I made them.
@gezakerekes10079 ай бұрын
@TerHorstCustoms Thank you! I'll do my best :)
@FlashFire174 Жыл бұрын
Where did you get the panels to cover the wires? I ordered this case and was curious about where to find them.
@TerHorstCustoms Жыл бұрын
I made those my self out of some 2mm acrylic and vinyl wrap.
@FlashFire174 Жыл бұрын
@@TerHorstCustoms Thanks! Was debating on designing a 3d printable model that I could make for it.
@eg85684 ай бұрын
@FlashFire174 hey dude, did you happen to design those 3d printable models 👀
@FlashFire1744 ай бұрын
@@eg8568 Not yet. I have a B550m mobo right now and doesn't really need it. I plan on getting a full ATX board so I can design it. With the smaller mobo it would have different angles to cover all the wires.
@wimvisser9133 Жыл бұрын
Gaaf hoor wederom 🤩
@TerHorstCustoms Жыл бұрын
Dankjewel Wim!
@Grapffik8 ай бұрын
Great build. I have a question though, in this configuration of case and aio cooling, can't the heatsink be at the bottom since there is a pump built into it? I'm planning to build something similar using this case and possibly aio, and I'm wondering if, aside from creating a custom water-loop, there's a chance to mount some aio radiators at the bottom - without worrying about its viability?
@TerHorstCustoms8 ай бұрын
Correct, with this AIO the pump is in the radiator and in theory could place the radiator in the bottom. However, the air in the AIO (never 100% full) still would go yo the highest point and with the radiator in the bottom it would be cpu block and get a air in there.
@aymanmeziani44Ай бұрын
Where can I get these caps for the aio and the fans as well as for the back of the mainboard and the cables?
@TerHorstCustomsАй бұрын
@@aymanmeziani44 see comment on the white one.
@andrewlarsen9700 Жыл бұрын
I wish my cable management looked as good as that.
@TerHorstCustoms Жыл бұрын
You can make that happen 🙂
@thejosele94 Жыл бұрын
dream build!
@TerHorstCustoms Жыл бұрын
Build it!
@AM_Agro11 ай бұрын
Where did the fan hub go? Amazing build so clean ❤
@TerHorstCustoms11 ай бұрын
The original fan hub isn't used in this build as the fans can daisy chain option. Thank you!
@AM_Agro11 ай бұрын
How did you manage a daisy chain? Amazing! Would you share your acrylic painel blue prints?
@TerHorstCustoms11 ай бұрын
@@AM_Agro The fans with the IO had the option included. Sure I can send you some info on how to make the panel. Could you send me a email regarding this to terhorstcustoms@gmail.com ? Then I can send you the details/ pictures during the weekend.
@AM_Agro11 ай бұрын
I can't thank you enough! Your being really kind! I'll have my dream built! Seriously, thank you so much ❤
@TerHorstCustoms11 ай бұрын
@@AM_Agro I have gotten the email, thank you. I will get back to you during the weekend.
@Sc8rps8 ай бұрын
May I know what fans you used?
@TerHorstCustoms6 ай бұрын
Those are the Fractal Aspect fans.
@jellyphase6 ай бұрын
Are the CPU AIO fans pulling in air or pushing it out?
@TerHorstCustoms6 ай бұрын
They are pulling air in.
@Honestly-2 ай бұрын
Hey quick question will this fit the 4090 gigabyte horizontally? and if im able to use the stock cable without having it bend due to the side panel, thanks in advance.
@TerHorstCustoms2 ай бұрын
@@Honestly- I don't have the build to check anymore but some googling shows that it should work: i.redd.it/acf7mv9p80ma1.jpeg
@maxfeng-w8o15 күн бұрын
is this the torretn compact or the torrent?
@TerHorstCustoms15 күн бұрын
@@maxfeng-w8o this is a regular Torrent.
@lhbbq Жыл бұрын
Clean!!
@TerHorstCustoms Жыл бұрын
Thank you!
@hrtlsmoe7 ай бұрын
Hello whats the orientation of the back case fan?
@TerHorstCustoms7 ай бұрын
Its setup as exhaust.
@ambidexmed Жыл бұрын
My radiator didnt fit with 3x 120mm fans in the bottom and 3x120mm fans as intake. I dont understand what i did wrong. The radiator is hitting the fan in the bottom :(
@TerHorstCustoms Жыл бұрын
Is the radiator moved all the way to the top?
@ambidexmed Жыл бұрын
I didn't know that was possible. I will check. Thank you for replying.@@TerHorstCustoms
@scottcamp961 Жыл бұрын
Are you willing to sell/ship the lower fan and rear covers?
@TerHorstCustoms Жыл бұрын
I free handed them but I can look into getting them made again. Could you send me a email regarding this to terhorstcustoms@gmail.com Thanks :)
@eg85684 ай бұрын
@TerHorstCustoms hey, are you still open to this idea?
@TerHorstCustoms28 күн бұрын
@@eg8568 I haven't thought about it anymore as I didn't get another case to use as a template for it.
@Sc8rps8 ай бұрын
What fans are you using?
@TerHorstCustoms8 ай бұрын
Fractal Design Aspect RGB fans
@leticiasoares90265 ай бұрын
Ficou perfeitooo❤
@TerHorstCustoms5 ай бұрын
Thank you!
@justY108 ай бұрын
how'd u get the butterfly?
@TerHorstCustoms8 ай бұрын
Like the logo? That was made by a shop that is specialized in Vinyl work.
@justY108 ай бұрын
@@TerHorstCustoms Beautiful one, its going to be a tough nut to find on my end somthn similar
@TerHorstCustoms28 күн бұрын
@@justY10 You could get some custom made if you like.
@portwest400 Жыл бұрын
Nice build, but the bottom fans are there to cool a large hot GPU. Now they are doing next to nothing with the vertical mount? Makes no sense.
@TerHorstCustoms Жыл бұрын
Don't worry they still help with cooling, the GPU still goes later off passive mode .
@krnzzang8411 ай бұрын
Itz for da showwww baby!! I kinda want it too 😢
@TerHorstCustoms11 ай бұрын
@@krnzzang84 get one, Fractal Design makes one you can just Install in the case.
@dandowodzenka8864 Жыл бұрын
Shame that there is no Promo Code for his followers to look into getting a gaming rig for themselves! Must be nice!
@TerHorstCustoms Жыл бұрын
Unfortunately I'm not the right party for this
@EmuDroid4411 ай бұрын
Name of motherboard?😮
@TerHorstCustoms11 ай бұрын
MSI - MPG B650 Carbon WIFI
@EmuDroid4411 ай бұрын
@@TerHorstCustoms Nice it looks so clean in your build. I'm doing similar build.
@TerHorstCustoms11 ай бұрын
@@EmuDroid44 Enjoy!
@halihalo214 ай бұрын
The AIO has a bad positioning.
@TerHorstCustoms4 ай бұрын
Does it tho? I hope you know this AIO has the pump in the middle of the radiator and is not effected by the air.
@halihalo214 ай бұрын
@@TerHorstCustoms Ah okay sorry than ill take it back