PC Case Mod Guide: Installing 240 Radiator (2x120mm)

http:://www.mnpctech.com/casemodstore.html

[@SSIRain]

I got an idea for the next mod tutorial: How to make a stealth drive. It is not that hard and could help a lot of people.

[@asdrubale3374]

Very useful, thanks a lot.

[@sunnysun2030]

damn.. always as fantastic videos even 8 years later! ... with all those sh**ty* rgb/no fans/no airflow(etc) cases nowadays (and always hotter cpu/gpus..)..those drilling tips are becoming even more invaluable (even if i'm not english.. thx a lot for all those videos.. real great DIY and clearly and simply exposed techs here, and great realizations always.. thx again /inspiration and all the tech/tools/drills sizes exact details always too etc.. really rare too, that, in that 'modding' scene (lots of poseurs too..mainly interested to showcase/sell themselves it seems, fro the few i saw already..) ! :) but thx again here! really well done!

[@MaxellAdGuy]

yes, RGB has infiltrated our hobby. thanks for the great post! You're invited to use my discount voucher code, MNFAN to buy any pc case mod suplies or products in my store, www.mnpctech.com/

[@Candyman97]

Much better, I only counted 8 um's! lol That is the toughest thing to master, and even professionals have trouble with that. Now work on changing the tone you are using, don't keep the whole spiel, in a monotone. I mean you don't talk to your friends like that, when you are doing these make believe you are talking to your friends. I would go back and watch the videos Bill does, and just sturdy the way he speaks. Bill speaks, and makes it feel, that you are right there, doing the project.

[@asdrubale3374]

Do you know where I can find that type of grill?

[@jarris7439]

Is there a way to isolate the airflow of the radiator from the air inside the cabinet? That must be the perfect solution. I would wish for a cabinet that had this designed into it. Well you need a couple of more fans, but what the heck...

[@longmage4]

Fractal design define xl with moded side window and modded 360mm radiator on top = a very cheap obsidian 800d!

[@farkdanarc]

fantastic video. i like how you evven show the "tricks of the trade".

[@AgraelDemonLord]

Fractal Define XL ... not very good case for watercooling by default. After moding maybe ...

[@HikikomoriDev]

....what if your radiator is not going to be on the cealing of the case but on the sides (in example when the case sits horizontal and monitor stands on top) ...will it produce the same cooling effect?

[@rajagam5325]

Going to mod h510 flow for top mount

[@ReiLiKFuL]

Had you ever thought about removing the front casing for the optical drives just to remove anything if any that is air obstruction that it could be causing? I know they're rivited on which can be annoying if you dont have a proper way to get them out...but just a question, been debating on mounting my h80 on the top 120m fan in front hense the question.

[@Verithiell]

That cut looks bad imo. Not very professional too.

[@1995billy]

This is legit, my dream job.

[@SMG4LIFE01]

my radiator setup is radiator and then case grill then my fans do you think the grill will cause less air flow though the radiator

[@lechefjayoliver]

Always worth watching these videos! Good to hear business is good with you modding gods lol. Thanks for the excellent tutorial guys, i'm in the process of modding my 2nd Kandalf LCS case (£35.00 ebay bargain) I love it! If only i had the facilities and tools you have, I've just got my rivet gun and wire strippers lol Contemplating an air compressor (saves buying cans of compressed air) too. Boys and their toys lol. Best wishes from the UK :0)

[@MrTwisted003]

Not the cleanest job, but perty good short of having machining tools. And the fact you actually explained everything in detail, something almost no one does... Great work!

[@MEXPRG]

Keep them coming guys, they are such good learning tutorials for those who wish to try to mod their own case. im even thinkin of practicing on a old dell case i have. Even picked up a rotory tool this weekend.

[@DWindustries]

I might try that....

[@ggesdsdsdsd]

Can you do this 240mm radiator cut-out on the top of a cubitek mini cube case? Thanks!

[@hardrive76]

advert is hanging and not letting me watch your video. this isnt good......

[@never_andy]

Good Job with the video. MonsterMAWDS!

[@lunzerbua2k7]

great job, i would love to see what you guys would do to a BITFENIX PRODIGY, I think it has a big potential. greetings from germany.

[@yoohoosk8r]

you guys should do videos while ur doing account builds, perfect time to be doing them cuz u can show what ur doing.

[@NJditt]

Nice work. I've been thinking myself of modifying me case but I so rarely saw people do I thought I was doing something stupid.

[@RandomNaaack]

And do you know the model of that jigsaw off hand? I'm in the market for a new one and that tool looks really smooth.

[@F6FHellcat5]

How would I do this on a n200 case, it has an indented 140mm fan hole on the top, but I'm not sure how to get it all level.

[@layol692k7]

i knew you guys were not gone for good your work is way to good to fade away! Keep up the great work and great videos!

[@josephdesales7791]

I don't have any plan to make a mod case for radiator mount but this video help me to find the size of the screw for radiator mount, thumbs up

[@oxman0313]

Your videos have been so helpful. I saved about $1k building my own computer using your tutorials. Thanks, keep up the good work.

[@Tenken08]

whats the point in putting a grill in front of the fans ?

[@pepijn_m]

for naughty fingers or stuff like a pen flying in(pen is still posible if it falls bad

[@amdebk4ever]

Fractal desing define XL =D

[@SYN420420]

ty to all. happy moding.

[@androvich20]

The upper fans should be pulling air upwards or downwards? MY pc pulls air from above (: thnx!

[@baloonia1]

Wow, I almost forgot about you guys, you have uploaded just a few videos so far this year.

[@honestinsincerity2270]

Wow, Fugazi soundtrack. That took me back.

[@MaxellAdGuy]

great band, thanks for watching! If you need anything elser for your PC, visit my store, mnpctech.com and use my DISCOUNT code, MNFAN at check out for 15% off your order.

[@honestinsincerity2270]

@@MaxellAdGuy Will do, thank you sir!

[@TECHXPOSE]

I Liked before intro :)

[@ASZzztoluca]

Exactly the reference material I was looking for. I shall definitely watch the rest of the videos. Thank You!!

[@BlazinThaChronic86]

the case is made by Fractal-Design and its called the Define XL Full Tower

[@jscollon11]

Tell me about the sweet metal work table. I have seen glimpses of it in many of your videos.

[@longmage4]

It's made by vikings!

[@TheMaskedbuilder]

why gone for so long

[@Cheese1master]

The only thing that I could think while watching this was: "This is glorious"

[@longmage4]

2:42 Mickey mouse.

[@HarishBhagat]

Fractal design define xl, its in the vid :P

[@kentmocc]

5:41 Nice wrench!

[@Christo_glenn]

Do you guys offer a 480mm version of this? Also, diggin' the store!

[@3dkiller]

very nicely done.

[@rztd]

Really well done

[@ferhancolka1797]

Does the side fan reduce the display card temperature? test please

[@MaxellAdGuy]

yes

[@MrButtonMonkey]

this guy is getting better at making vids, keep up the awesome work

[@KingDmacGamers]

I want to start modding my case but idk how too, and the case looks too sexy c:

[@MohammedBabur]

cool video!

[@net200777]

Good job

[@NorthRedWave]

Im glad that you guyz are back! Nice tuto as always!

[@CaptainSrzBznz]

awesome vid, i hope u guys can post more!

[@mjkmojofool]

This was a great vid- simply explained- so even we beginners can follow- and well shot. Thanks for sharing.

[@Liakos256]

Glad to see you guys are back :) Keep them videos coming!

[@23hocke]

Thank you guys so much for uploading this video! You have inspired me to begin modding my case! I just order some acrylic and 3m di noc carbon fiber tape.

[@Theogmessy]

Hey guys. Will a 240 rad fit in the fractal design r4??

[@KingDmacGamers]

I think you guys should mod the new rosewill galaxy 02 case!

[@RandomNaaack]

HEY NOW! Did someone hire an employee???

[@senatortrout]

I'm probably going to do this for my 600T mod!

[@sunkissuae]

I really do enjoy the video a lot! Thanks

[@minciNashu]

pro

[@vyolateher]

what case is that?

[@transatlant1c]

Love the video Bill, your intern is doing a fabulous job!

[@leond.i.y.8972]

nice work bud looks good will probably do something like this to my case

[@MaxellAdGuy]

Thanks for watching and commenting on my video! Bill at www.mnpctech.com

[@DylanNicely]

why didnt you guys just make a rectangular cut instead of circles?

[@marcogarciadeleon5840]

Maybe its harder doing with rectangular cuts.

[@MsJinkerson]

like peanut design

[@SirDoogle87]

Oh man did I miss you guys! Thanks for the new vid!

[@wirdanutomo]

its great!!!

[@parri111]

cool movie dude! i would love to see an installation guide with a radiator on the backside of a case!

[@truckcompany]

No, thank you for putting this video up.

[@Christo_glenn]

diggin' the store!

[@LJCH4E]

thanks for tutorial!? what case is it?

[@BolermieWorldwide]

it is beautiful man, thank you!

[@Munyos1]

Thank's man !! Good video.

[@RageQuitRQ]

Whatis a radiator? Does it heat up your pc?

[@fri1630]

this is super late but a radiator helps to transfer the heat from the cooling liquid to the air efficiently so that the CPU or GPU is cooled

[@allie5933]

Thanks for the help!

[@greatsea]

what the hell is a radiator?

[@floopy312]

its a new invention cooler manufacturers have come up with to make u waste more money on something you don't need at all.

[@euphoria3066]

hi where to get the template?

[@MaxellAdGuy]

You can download MNPCTECH FREE Radiator and Cooling Fan Templates here, mnpctech.com/pc-cooling-fan-templates.html

[@TheDarkSide46]

wrench ??? sir that was an ALLAN key

[@dylanp552]

Allan key??? Sir that was a screwdriver (torx not hex)