PCP Valve New Design

This is my new PCP Valve Design for larger caliber.Next video will upload soon.
Support my channel financially
/ faceoffchannel
or
If these videos are interesting, please donate for me at this link:
paypal.me/face...
Buy PCP air cylinder & regulator
amzn.to/37YM5C6
High pressure hand pump
amzn.to/386ODhu
amzn.to/383Gniu
Follow me on Instagram:
/ faceoff_channel
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheir...
Track: Lost Sky - Dreams [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Lost Sky - Dreams | Tr...
Free Download / Stream: ncs.io/DreamsYO
"Peritune - Chinatown Healing" Attribution 3.0 Unported (CC BY 3.0)
Music provided by BreakingCopyright: • COPYRIGHTED, DO NOT US...

[@waltermarshall7257]

Imagine this guy with serious tools for example a lathe ,milling machine and a decent tig welder,,,,, it will be the birth of a new pcp air rifle brand for sure, exellent work my friend👌

[@skmobile5544]

ช๐​

[@elucidator2]

He got 3.2 million views, guess he can buy the equipment now

[@Robert-uv4eb]

Not really

[@South_Sparrow]

I have been watching videos like these for years, bit of a strange hobby and I have always wanted to make my own air rifle. This is one of the best designs I have ever seen using fittings. You are very ingenious.

[@davidschmidt6013]

I was, in the past, more critical of your vids...but I've come to better understand your methods and your ability to work with "what you have". New, more appreciative, fan here.

[@aliali-et7xh]

y

[@jtcustomknives]

“Rubber bush” I think that’s what’s on blowup dolls lol

[@alexandresilva-gc9th]

you are an expert in PCP carbine construction congratulations

[@VC27]

Top notch workmanship. I wish you were my neighbour, could have learnt a lot from you.

[@booom2314]

This is revolutionary. I really like what you are doing and I hope that KZbin is not killing your channel! Keep up the good work! Thanks!

[@faceoff2]

KZbin is hard.😪

[@ชูก้าร์-ด7ณ]

ราคาเท่าหร่

[@ชูก้าร์-ด7ณ]

ไหร่อยากได้

[@elcalladodelsalon795]

ชำึึึึึึึ ัััััั ึึึึึ ึึึึึึ ุึึึึึึึ ึึึึึึ ึึึึึึ ึึึึึ ึึึึึ ึึึึึ ึึึึึึึึ ึึึึึึ ึึึึึึึ ึึึึึึึ ึึึึึึ ึึึึึ ึึึึึ ึึึึึึ ึึึึึััััีี ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึ ึึึึึึส

[@dusblb]

mantap ilmunya..pengen juga membuatnya...

[@haka8702]

You have a lethal design flaw there. The hammer/piston you built will wear down with each trigger, it might hold one trigger or 100 but at one point the small metal plate will separate from the piston, resulting in the piston to fly backward. Possibly right into (and through) your head if that's behind it. That's a certainty, it will happen the way it's built. It might even happen without triggering if it stays pressurized longterm. Please take that into consideration with such designs, keep in mind where point of failures are likely, or it's "face off". A second more general warning comes from a death in germany a couple years ago. The guy was a hobby diver and he built something very similar to your valve, also from steel screws to equalize pressure between his many bottles, pressure up to 4500 PSI. He did that for multiple years, one day the steel screw construction broke and two parts flew into him. One through his chest and one into his skull. He died from the brain injury the same day, his child found him. I've seen a steel screw bigger than the ones you use rip in two pieces (more than 1 cm in diameter) from material weakness from less than 100 atm/bar (1500 PSI). Aside of that, it's quite awesome to see such functional design made with such simple methods. inspiring. Also scary.

[@krzysztofer85]

Simple solution to this problem is to not drill a hole through the whole part. Just a nest to stick in the shaft.

[@acorgiwithacrown467]

What would you recommended instead of the steel bolts?

[@wildrangeringreen]

@@acorgiwithacrown467 an actual threaded rod, threaded into the seat-head would work, especially if you use red Loctite

[@randomstuff23453]

Love the music so relaxing.

[@faceoff2]

Glad you like it

[@davekiave210]

Absolutely brilliant!! Thanks for sharing!

[@peterrobertson0371]

Another great video. Always learning

[@vladimirrangelalonso9106]

Great Job!!! Keep it up!!! Saludos desde México!!!

[@hungnong8061]

ok

[@alvinbiating5284]

Nice pcp valve great job.

[@faceoff2]

Thanks 👍

[@kepala2desa]

Dear face off, I am very impressed of this particular pcp valve. Is there any ready units to purchase from you?

[@Biokemist-o3k]

New Subscriber here. Thank you for the incredible information!!!

[@adler761]

Those who wondered what is the bypass that connects the valve and the trunk, its name is 90 degree stem brass

[@SniperDayak]

Woww...amazing..I like this👍👍👍

[@NewLife-jw9to]

Awsome 😘 one's again u nailed it 🙏🕉🙏🇮🇳

[@faceoff2]

Thank you.

[@NewLife-jw9to]

@@faceoff2 can u make a pocket air powered mini dart gun ? 🙏🕉🙏

[@faceoff2]

@@NewLife-jw9to That's a good idea, i will definitely make one.

[@NewLife-jw9to]

@@faceoff2 waiting for the video plz make it in ur next video 🙏🕉🙏🇮🇳

[@One.6303]

That's so good

[@wlwctv7005]

Your drsigned are so good Tamsak done.

[@yvancoissieu7390]

😊Trés bon travail 👍

[@omeger07]

your designs are functional and easy to get. looking forward for your next videos

[@faceoff2]

Thank you man

[@zulkiflibutarbutar5858]

@@faceoff2 rp

[@TairIzzet]

@@faceoff2 Вы настоящий оружейник-конструктор!))На 2:43 минуте ,что это за фтулка?

[@sotheamam1244]

Nicely done

[@camuflagemoliveira298]

testado e aprovado 👍

[@MrTimmmers]

That is nice work.

[@steveboone5480]

I’m down with Team Face Off!!!! You’ve simplified my ideas for me bro!!! Thanks you are brilliant

[@kekhriesiliesolo7920]

1iyyyyyyuy. P

[@ametkarakus7859]

Super work..

[@disillusionedone9282]

When the loc-tite breaks that 3 mm rod will be a dart lol

[@PNWLeviathanFPV]

Anthony White yeah lock tite only likes to hold with a thread so it has something besides friction to grip with. Still trying to figure out the application for this also. It’s a really large value. Definitely limits what you plan on using it for.

[@杜嘉墨涵]

Anthony White Which God to explain under the gas cylinder mouth on the black is what valve ？

[@leafrusenov2142]

Yeah its happened to me with epoxy they come out crazy fast

[@schnaps1790]

Compressive shear strength (ISO10123) for 262 with Steel pins and collars is 1450 psi, but only 25% of that with brass. so be carefull

[@菜鸟-q7i]

Will the gap of the trigger lever not leak? Why do I always leak when I make it

[@samhardy5351]

Keep doing great work , and many thanks

[@faceoff2]

Thanks, will do!

[@waltermarshall7257]

Well done friend,and all done with basic tools👍

[@koreraswit3787]

super top markotop 👍👍👍

[@ReavinBlue]

but I do think you should either name every one of these parts and tell us where got them. because, for example, a lot of people might not know the 3mm rod is from and old hard drive and might try to buy it. the rubber bush also, where did u get one? or that thing that came before the rubber bush, i dont know what it is... that aside, great vid, very helpfull

[@mattye880]

Totally agree

[@yorghshprave1964]

eBay😁

[@gingersnap7793]

Probably better he didnt before someone out there hurts themselves lol. There have been some pretty bad accidents before. Like the one guy who got a 30 mm end cap put threw his leg. Most people know how to be careful, but theres always a few who dont.

[@S.G.E299]

Wowww Muantap Kreatif 👍👍👍👍

[@Sub-sônico33]

Very nice

[@faceoff2]

Thank you.

[@supersoakerguy3]

very clever and nice work ;)

[@ReavinBlue]

Great vid man! keep it up

[@faceoff2]

Thank you ...

[@PARALONJITU]

Mantap abangkuh Joosss gandosss tutorial nya... Mudah dipahami.. Mantap Mantaappp mantapppppp Josss gandos

[@SniperKalimantan]

very nice and good luck please

[@fabianoyola7662]

Muy bueno!!!

[@danielpriscan3121]

4:40 Pray to god this Loctite NEVER releases 🤣🤣🤣🤣

[@JT-gu8ym]

is this constant pressure for every shot? as gas gets less and less，pressure is lower than before. am i right？

[@jovidkobra]

Hello ay am pupil Tadjikistan. Nays very good. Ay am love you work job

[@sothupaanai6598]

How to ader in india

[@XobdoMusic]

Very usefull... I need this valve

[@asv21]

Mantap bosqu Palembang hadir

[@bintorosong7645]

Terima Kasih telah berbagi keahlian .👍🙏😁

[@zaniehunter]

Luarbiasa kreatif👍👍

[@milanamnsmdahl7902]

Mantap mas bro

[@ANOAR97]

Any link for this nut... Jo apne regulator ka upar use kiya...

[@CreateVideo]

nice video + LIKE

[@hskim2601]

Wow!! as always love your new design haha looks like your camera skills got better easy to see what you used, and easier to know each part's measurments. I am trying to make the valve of your last video. Unfortunantly, I dont have a tapping tool, it maybe hard to build this one >

[@faceoff2]

You can buy tapping tool from AliExpress , it's cheap.

[@gaurabpattnaik1383]

@@faceoff2 yes

[@hskim2601]

face off ohh thanks looking for some :)

[@พลากรประกายดาว]

สั่งได้ที่ใหนครับ

[@hunkti]

@@faceoff2 whats the part at 1:24 that you screw into the cap... i cannot find it. Would greatly appreciate the info @faceoff

[@georgegeorge6442]

BRAVO VERY GOOD VIDEO!!!!!!! GEORGE CREECE ATHENS

[@ifugaolifehack9098]

Can you make semi-automatic airgun plz.. show us u make?..thank you..

[@Theperfumesparlor10]

Very nice sir good work

[@faceoff2]

Thank you

[@ANDESKU]

TRIms sir at video and information..i am from Indonesian 👍👍👍

[@ANOAR97]

Vi... I need to know.. Konsa size ki nut ap regulator ki upar use kiya...plzz

[@dunno6442]

How does this push the pin in the regulator? Or have you removed it? Newbie airgun maker here

[@kencana9720]

Terbaik lah mana2 yang nak buat senapang angin boleh belajar dari mamat ni Info lengkap.. 👍👍👍👍Good job💝💝

[@faceoff2]

Thank you.

[@mohawksteel2215]

well done .... good job

[@faceoff2]

Thank you.

[@princeofduxnez8527]

@@faceoff2 hello sir..can you postage to malaysia? How i pay you?

[@mbahbendil]

Josss

[@derpyturtle4708]

hey, do you mind sharing the links for all of these parts? I cant seem to find many of them at the hardware store. love your channel by the way.

[@hurabbas5959]

You can buy all of the major parts from ali Express

[@adler761]

@@hurabbas5959 u need to know the name of them😂

[@moinuddin2492]

I want one can u help me to purchase.

[@elhoussineelganadi3126]

Excellent

[@alasmotofishinghunting]

Nice video

[@faustopoletto4620]

Hello sorry if I disturb you but I can not find the compression fitting could you give me a link to buy it the same as yours I would also need the 3 mm plug to be drilled. Unfortunately I can't find it Tanks 

[@janmejaipal9934]

Bhai Silendar milegi kaha se or ye compressor watch

[@macentertainmentofficial4591]

You should indicate where you bought the materials.

[@shintokatana17]

Cool shit dude!

[@alexisroa1508]

Sir ask lang Kung tinanggal mo yun pin ng regulator bagonkinabit yang diy valve

[@sniperbengkulu]

Istimewa..

[@kakashebarros]

Very good..___!!!

[@dallinostler4794]

So does this hit the pin on the regulator? Or did you disable the pin valve on the regulator on the tank?

[@faceoff2]

I have removed it from regulator

[@amerhussain8359]

Doesn't the air leak from the hammer hitter side ??? I really have a doubt

[@mattbrundage55]

Cerous what was used for the cylinder

[@danvintila3925]

Hello! I do not understand how the air is released from the tank, because the valve is actuated by the hammer, but the regulator is not actuated by anything. How is it possible to release air from the tank? Thank you.

[@정표홍-y7y]

Is the pressure adjustable?

[@davekiave210]

Do you kow, approximately, the output power? In PSI, MPA, Joule, any...

[@KClO3]

Is it better to have the spring outside off the valve rather than on the inside like you always do normally?

[@faceoff2]

It is relatively easy to install spring on outside also quite easy to adjust the spring tension without disassembling the valve.

[@milanamnsmdahl7902]

Terbaik bro.mantap

[@guus8801]

heyy i have a tip for the next vid. could you pls write everything down like what u use and stuff thanksss

[@roelalfonson6209]

Hello do you remove the pin in the vapve pin or not how to open the valve if you not remove the pin.or not remove air

[@rejusimon]

hi can u pls tell me where did you get that air tank for this project? it will be realy helpfull if you can comment any purchase link for that

[@thawkhant8046]

How to buy accessories? Please tell me full accessories name!

[@А04-х3я]

1:12 can you tell me what is the name of the brass thing that you screwed into the fitting. if it's not hard you can make the name and size of the parts by timecode

[@А04-х3я]

I do not speak English well I write with a translator

[@mechanicalkids4667]

Machan poliyaaa.... sugamalle... work engane ponu😍👍👍👍👍

[@JamalbatongJamalbatong77]

Mantap bosku❤❤❤

[@suoppsdn9751]

Love how you make this type of stuff without a milling machine. Where can one find the small threader thing?

[@braddorris4535]

Now from what I see, unless you removed the valve from the top of the hpa tank, there’s no way for the valve pin the push it open to release the air.

[@gabrielsamael4022]

it also confused me..how the air going out?this is not real..

[@braddorris4535]

nazghul miestic it’s not far off from being functional, just not sure what is opening the tank itself

[@gabrielsamael4022]

he not replying your question..so like i said..this is not real or maybe he test another air valve design not the one that he show to us..

[@mohdsham3255]

I think so. Now i see the true intelligent comments.. from the many comments are believed on that.

[@enzoduval2242]

He simply remove the little pin valve from the tank, this way the 800 psi preset still works

[@pacificbeetechs]

Amazing

[@rustamgani6826]

Thanks! You're the bast in this think s!!!

[@joseeraldo6200]

Pi2

[@josephshattuck5210]

That was great

[@muhammadfaizal908]

Great job brother.. May i ask how the regulator works with the pcp valve.i mean how the air from tank running thru the regulator and then to the pcp valve. Are you modifying/removing the regulator output pin?.

[@faceoff2]

Yes I have removed all the internal parts from regulator.

[@muhammadfaizal908]

@@faceoff2 thanks. Keep up the good works... 👍🏻👍🏻👍🏻

[@aaabdhamid]

Could you plz send me a material list Thnks alot

[@pancatunggal7437]

Joss ndan...

[@alexjaimelozanoalcivar9094]

disculpe cuantos psi aguanta esa valvula

[@jayhadsuraik145]

Does hammer valve is better than piston valve?

[@Adi-og6qi]

Klau yg begitu berapa bos yg belum ada Laras nya,,,

[@riponraj7816]

Vai ei parcpati kothay payajay amar lagbe,

[@shooterxchannel8102]

Liked and subscribed 👍👍👍😀