Peak Design Capture Camera Clip V3: Setup + Tips

Learn more at peakdesign.com/capture
Art Director Lawrence "Belt-n-Suspenders" Lander walks through everything you could ever want (or not want) to know about setting up and using the all-new Capture camera clip. Enjoy this video. Laugh. Cry. Shake your fist at the sky and yell "WHY ME?! WHY NOW?!" Just make sure you're well hydrated and sitting down, because Lawrence has been known to blow people's minds with his deep knowledge of and yeoman's commitment to hi-jinx and shenanigans.
If Tik Tok has damaged your brain to the point where you can't comprehend more than 10 seconds of video at a stretch, just jump to the part of the video you're curious about -
What's in the box - 00:00
Installation - 0:42
Belt Installation - 1:30
Backpack Installation - 2:44
Thick Straps - 4:39
Pancake Lenses - 5:31
What's new - 5:31
Dual Plate - 6:55
Carry other devices - 7:50
Backward Compatibility - 8:40
Pro Pad - 9:26
Pro Pad on a belt - 9:40
Pro Pad on a Backpack - 11:29

[@ubacow7109]

Can you guys do a test where lawrence is jumping with a camera on for like 20 minutes lmao

[@jmal555]

Efficient and very informative with cheeky humour, wish all the product videos were like this.

[@SpencerPablo]

Beautifully awkward video. Awesome product!

[@rivius5491]

I'm still using the V1 and couldn't be more satisfied with this little thing. Great product!

[@ac9669]

Very clear and calm (no over-acting, no exaggerating) review. Luv it

[@rgarlinyc]

Clear and concise; kept me smiling too, Thanks LL, you're a star.👍

[@LoboOutdoor]

Love Peak Design products. Bought the wrist strap the other day and now I just purchased the capture v3 clip.

[@matthewloftus798]

Very helpful video. I am now Very pleased that I purchased the pro-pad in addition. Thank you.

[@secret5.]

Forget the capture, how much to hire this guy for parties!

[@JoshJourney]

Absolutely beautiful product that works great with the Sony A7. The V3 and the new P.O.V. plate doesn't feel quite as secure as the standard V3 plate but seems to do it's job so far. This is a serious game changer for rock climbing in terrain where speed and camera safety are critical for capturing scenes, not losing the camera, and being efficient while belaying someone (of course getting their approval and locking them off). The POV kit will be used for the RX100 and GoPro.

[@nokem6505]

i liked the jumping part! xD

[@User-sanie624]

Just purchased the Slide Lite for my XT-2, and its awesome!!!!!

[@arseniybarsi7362]

Thumb up if you want that Silent Bob jump with camera again

[@TheXone7]

Peak Design Video Haha guys I am going to buy this now, but I love the way you present your humor :))))

[@Vincent_Vrsn]

Hope a V4 will come one day with the return of the tensioning screw of the V2 (which I own and which I am very happy with!), it's nearly essential for MTB carrying to avoid jiggling noise.

[@jody1622]

Ohhh now I get it! And it works!!!

[@crlclssic]

AMAZING !

[@scottsater]

Great Video, Lawrence! Learned a lot, and was entertained mightily :)!!

[@fotochips5300]

Need to see more jumping with the pro pad.

[@roganthoerson1909]

Why not a d ring screw so tha we don't have to care about the tool ?

[@mePOPnow]

This looks freaking awesome

[@jandjfunadventures7384]

Yay for Lawrence the Reference!

[@peakdesignvideo]

A real fan....

[@djshumov]

awesome tools

[@johnhallinan252]

great product, how about a left handed version??

[@dimitriss.2630]

Can I put the Pro Pad on a backpack strap but in the same way you demonstrated for the waste belt? Perhaps then I can protect my precious compagnon leather bag from getting scratched from the capture? Obviously I just need to set the orientation of the bottom clip vertically to allow the lens to face down. Would that work?

[@luciavazquez6472]

Great tips and video. Just a question, if I have the plate of the Clutch Camera Hand Strap (its the square one), will it work with the Capture v3? Or do I have to buy the special plate for the Capture?

[@peakdesignvideo]

Hi there, the Standard Plate which is included with the Clutch is compatible with Capture V3, please see the following support.peakdesign.com/hc/article_attachments/360001746346/plate_compatibility_chart-01.jpg support.peakdesign.com/hc/en-us/articles/201291383-What-s-the-difference-between-Capture-s-plates-kits-

[@David123p51]

Do you think I am able to use this with my GoPro and my scuba gear, backpack style? I will be rolling all over the place in the water, do you think it will keep my gopro in place and keep it from being lost?

[@Deimos000]

How is your walking balance on longer hikes with the camera on your backpack?

[@virusheat]

Hi, from the video do you mean you can't release the camera with one hand when using pro pad?

[@roouramits]

we don´t have peak design in Brazil! Come to us please.

[@mark_rutt]

do the hex head bolts work with previous versions? and if yes, are they available separately for purchase?

[@peakdesignvideo]

Hi Mark, they sure do work with Capture V2, please see the website, where you can pick them up www.peakdesign.com/collections/clips/products/bolt-pack it is a standard M5 pitch thread.

[@slhibbs]

does the 3 legged plate on brian fit this clip

[@nizar5558]

Hi I am searching for the compatibility of my Manfrotto MHXPRO-BHQ2 with 200PL with capture v3. I own Capture V3 from the kickstarter campaign. But few days ago I bought Manfrotto with 200PL plate, I am wondering whether your Manfrotto dual plate is compatible with MHXPRO-BHQ2 with 200PL plate. I have look at your wonderful chart but I still can’t figure out the compatibility. Please help me before I order your Manfrotto dual plate. Thank you very much.

[@peakdesignvideo]

Hi Nizar, The Dual Plate will be compatible with the Manfrotto MHXPRO-BHQ2 with 200PL Plate. Please refer to our support article at the following link support.peakdesign.com/hc/en-us/articles/202143695-Manfrotto-Tripod-Compatibility

[@lorenzo4262]

i've bought capture v3. But i'ts nor easy to find position for capture in backpack. also in your video, the sigma lens (near lenshood) strikes again and again versus the metallic part

[@JacReviewsStuff]

Ok I bought the silver one. The capture v3... I also have the Field Pouch. Please please explain to me how to get the capture onto the field pouch. Do I need to take a knife and cut 5mm off each side? Please explain.

[@peakdesignvideo]

Hi Jac, you don't need to cut the hypalon, you can simply fold a little over from each side, please see the following photos. flic.kr/p/DmkgMq flic.kr/p/GxrXkn On the newer Field Pouches, we have reduced the width of the Capture attachment point.

[@Gadgets20]

There should be a way to get rid of the play between camera and clip. Something like after it's mounted, there's something that tightens to eliminate the play. It's just annoying cause I can hear the clip moving around when I walk. Think about implementing it for v4.

[@peakdesignvideo]

Hi there, the Plate Lock which performed this action was removed from Capture V2 for V3 as it was an underused and often misused (as a safety lock) feature. Additionally, inadvertent tightening of the Plate Lock also could make it difficult to insert or remove the plate from the clip.

[@micwarmington1]

does an 'old' plate from v1 fit into the new v3 clip ?

[@hunterpanosian5944]

Do you need the plate to use the clip

[@virayudh]

I’m using Capture V3 as well as Manfrotto BeFree Carbon SKU: MKBFRC4-BH the tripod has attached ball head with a plate 200LT-PLsupplied in the set. Will this dual plate compatible with my tripod as well as Capture V3? Please help

[@virayudh]

Reason I’m very confuse is due to my local dealer here said it won’t be compatible while on the PD website said it is compatible. Sadly local dealer isn’t happy to open the box to let me trial the compatibility.

[@eumarzephyr]

Capture V2 does work with the v3 plate of you know what you're doing I am using my old V2 with the new plates

[@peakdesignvideo]

It is possible to use the new V3 Standard Plate with the Capture V2 if you use the V3 Hex Bolts, but as the majority of users won't necessarily have this as an option, it is not something that we are actively messaging.

[@guito279]

is it compatible on any adaptateur for tripod ? thank you

[@novakkosanovic]

Is the new dual plate compatible with Manfrotto MT055XPRO3-3W?

[@peakdesignvideo]

As this Manfrotto Tripod is RC2 compatible, the new Dual Plate is natively compatible with this unit.

[@novakkosanovic]

Tnx :)

[@yeungchristopher9865]

Can you use capture with clutch?

[@peakdesignvideo]

You certainly can, you just need to ensure that you consider which of the anchor locations you attach the clutch to the bottom of the camera so it doesn't interfere with the insertion of the Plate into the Clip.

[@StephenFungOK]

It's a "Backapck"! Secret prototype product spotted at 11:28 ! :)

[@DriveLongRoad]

Need lens kit for mft

[@stehlealexander]

Lens Kit: why Not for m4/3…

[@novakkosanovic]

or fuji

[@navpreetsingh8156]

No tripod screw on the bottom :-(

[@godofhope]

With a big DSLR it’s pretty much everywhere uncomfortable to carry it. It’s made for light cameras.

[@StephenHsiang]

you unmount the lens with power on, holy!

[@adriangraf8432]

Can I handle this plate with any 3rd party tripod?

[@peakdesignvideo]

The Tripod Plate works with ARCA Compatible Tripods. Please see the website for a list of supported tripods and advice what to do if your tripod is not supported (plate stacking).

[@adriangraf8432]

Peak Design Video perfect, thank you!

[@hankypanky4u]

3:06 to 3:16 gonna use that clip to pick chicks when they ask about my talents.

[@AndrewTimosca]

Is it weird I watch these for the comedy?

[@postrockful]

you are so cute. ㅋㅋㅋㅋㅋㅋㅋㅋ

[@blcsfo]

Your prices are much too high. The prices sold on Kicker Starter should be what should be sold at retail. Also many of your bags sold on Kick Starter are resold on eBay. People don’t seem to want to keep them.