Router table insert plate for Makita RTC0700C

Wood you Do It
One of the upgrades I planned to do on the workbench was to insert my Makita palm router next to the table saw in order to take advantage of the fence. It came out just fine. Now I need to make a dedicated router fence to attach to the existing table saw fence.
Please remember to SUBSCRIBE and hit the BELL for all my latest videos to my channel at / woodyoudoit
If you would consider supporting my channel I would be very grateful, please feel free to donate to my PayPal
🌎 PayPal account.
www.paypal.me/djpedrog
You can also buy me a coffee here 😃
www.buymeacoffee.com/woodyoudoit
🌎 Follow me on Instagram:
/ wood_you_do_it
🌎 My Website
pedrogameirodiy.blogspot.com/
#woodworking #wood #handmade #woodwork #woodworker #design #diy #woodart #makita18v #makitatools #furniture #homedecor #woodcraft #carpentry #woodshop #wooddesign #router #handcrafted #carpenter #maker #woodturning #furnituredesign #makersgonnamake #workshop #custom #makitapowertools #wooden #woodworkersofinstagram #home #makita

[@yevgeniytsvetkov1655]

*I absolutely love this tool!!! The first one was defective and Dewalt replaced **MyBest.Tools** More bulky than the Bosch and Makita corded palm routers I have but worth it. Nice solid base*

[@user-hd6gh2fp8k]

I need to make one for myself, thanks~

[@super-z8943]

Thanks man. Learned something new today. "How to cut sharp corners with a common router bit?"

[@minicooper2572]

This is the most complicated way of doing a simple job iv seen

[@WoodYouDoIt]

Thanks for your comment. It's the way I find easy to do with my limited skills. Hope you can teach me a better way.

[@krisdevos3231]

@@WoodYouDoItI think what he meant to say was that; if you had a larger router base instead of the black circle one you kept removing you could have easily crossed the distance without having to use scraps of chip board to hold your router up. Hope that helps.

[@larselustig]

Looks very good. Have fun

[@WoodYouDoIt]

Thank you so much.

[@MrFusker10]

Again a perfect job 👍

[@WoodYouDoIt]

Thanks mate 👍

[@andyelliott8113]

Can't wait to see how you plan to do the router table fence.

[@andyelliott8113]

Ah, it's just occurred to me that you don't need a router fence, the table saw fence will do. Or do you plan to add a modification to the table fence that has dust collection added?

[@WoodYouDoIt]

@@andyelliott8113 I'm still thinking in several possibilities. But defenetly will take advantage of the table saw fence. With dust collection for sure 😉

[@adriancarrazana2904]

thanks pedro for your vídeos!!!

[@WoodYouDoIt]

Thanks Adrian 👍

[@mariano_353]

Looks fantastic, man. Great job. Maybe adding two parallel miter tracks perpendicular to the fence in order to be able to use jigs (like a box joint one) is a good idea...

[@WoodYouDoIt]

Yeah true. 👍

[@youtukang]

Nice 😍😍😍

[@WoodYouDoIt]

Thank you 👍👍👍

[@LuLuDaBomb90]

Full power

[@Aprendiz-de-Marceneiro]

Great work friend. 👍

[@WoodYouDoIt]

Thanks

[@user-ih1zw3ly6p]

Чудово!

[@francescocampanile8819]

Grazie Pedro!

[@WoodYouDoIt]

Grazie Francesco

[@francescocampanile8819]

Pedro Gameiro Pedro, la piastra è disponibile su Amazon?

[@WoodYouDoIt]

@@francescocampanile8819 Volevo mettere qui il link dove l'ho acquistato, ma sembra che il venditore non sia più attivo su Amazon. Ce ne sono diversi identici in vendita su Amazon ma per questo modello di router deve essere uno in particolare a causa dell'uragano.

[@francescocampanile8819]

Pedro Gameiro @Pedro, infatti, sono interessato perché ho il modello Makita RT0700CX3J.

[@escanifobeticomendes2517]

Muito bom Pedro

[@WoodYouDoIt]

Muito obrigado 👍 subscreve o canal e segue no instagram instagram.com/pedrogameirodiy

[@mikisidi70]

ciao Pedro complimenti per i tuoi progetti

[@WoodYouDoIt]

Thanks. Please subscribe the channel

[@marioferreira5525]

Bom video como sempre. Parabéns. Como se consegue um destes router table plates por aqui? Não deve ser fácil. ..

[@WoodYouDoIt]

Obrigado Mário. Quis colocar aqui o link de onde comprei, mas parece que o vendedor já não está ativo na Amazon. Há vários identicos a venda na Amazon mas para este modelo de tupia tem de ser um em particular por causa da furacão.

[@photozen8398]

why are you going in the opposite direction ? climbing cut?

[@williamdoyle649]

Is this router going to be "big"enough for you?Your projects look like you should have at least a 2 1/2 hp router.Good job on this bench.My favorite.

[@WoodYouDoIt]

Thank you so much for your comment. The router is enough for me so far.

[@sherwincolina6570]

Hello, awesome job. Will this insert template fit most palm routers? ty

[@WoodYouDoIt]

Hi Sherwin, thanks for your comment 👍please subscribe the channel 😉 this insert plate only fits this model of Makita.

[@CarlosAugusto-mc4ke]

Obrigado Pedro Gameiro pelo video. Qual o material da placa onde está a inserir a tupia? MDF?

[@WoodYouDoIt]

Olá Carlos, obrigado pelo comentario. 👍 O material é Valcromat. Subscreve o canal 😉

[@d.beaumont9157]

This is excellent Pedro, I've made a bench with the valcromate top, I was going to put my router at the bottom of the bench, but change it to the side of the table saw, I can utilise the excellent Dewalt fence. I'm going to make a wooden fence to clip onto the saw fence. Are you going to attach a fence on yours. If so will you be making a video. Once again thanks for the videos.

[@WoodYouDoIt]

Yes David, i wanna do the exact same thing as you but i don't know if I'm going to make a video about it.

[@d.beaumont9157]

Hi Pedro thanks for replying, when I saw you putting your router next to the rip fence it made perfect sense. Its coming up with a fence that will just sit on the dewalt fence. I think it would make a good video. I can appreciate that these videos take some making.

[@baldurkuhn1]

Good video. The large rectangle hole, what's that used for? Thanks!

[@WoodYouDoIt]

Hi, thanks for your comment. Please subscribe the channel. The rectangle hole is to insert the trimmer guide.

[@emmanuelmartinez8861]

where can i find the mount you used for the table? im looking to do the same to my rounter.

[@WoodYouDoIt]

Hi Emmanuel, thanks for your comment 👍 please subscribe the channel 😉 you can buy it here www.banggood.com

[@nataschas.6560]

Hi Perdro. Did you mill the cutout with a trimming cutter without ball bearings? Greetings Natascha

[@WoodYouDoIt]

Hi Natascha, yes i did it with the inlay piece that came with the router.

[@slaplintern3509]

Hey brother, how much does the plate insert reduce the cut depth? Are you stll able to have the full Depth of the cutter above the table or not anymore? Thanks brother.

[@WoodYouDoIt]

You still have the full depth with the insert plate.

[@davidduperron8052]

This is great! Do you have a link to the router table you used? I've got the same router and I'd like to make something similar in my workshop! :)

[@WoodYouDoIt]

Hi David. Thanks for the comment. Please subscribe the channel 😉 you can see here banggood.app.link/n9KSmXhhTbb

[@davidduperron8052]

@@WoodYouDoIt already subscribed! ;) Thanks just ordered mine!

[@danielhomolka9459]

thanks for the video! is that a remote that you are using at 9:20? if so what make/model please? Bluetooth?

[@WoodYouDoIt]

Hi, yes it's a remote to power on the dust extractor. It's a eMylo smart wireless rf remote control. Hope this helps you.

[@mikisidi70]

ciao Pedro complimenti per i tuoi progetti :)

[@WoodYouDoIt]

Grazie mille Miki👍 Iscriviti al canale 😉

[@mikisidi70]

@@WoodYouDoIt mi sono iscritto Resto in attesa di altri video

[@WoodYouDoIt]

Puoi visualizzare i miei altri video. Presto ci sarà un nuovo video 😉

[@faupescus]

Bom dia, só por curiosidade, qual o material da placa que usou para a mesa? Viroc?

[@WoodYouDoIt]

Olá boa tarde, obrigado pelo comentario. O material é Valchromat, é fabricado pela mesma empresa que produz o Viroc. Subescreve o canal e vê os meus outros vídeos ;)

[@designlovedesign5140]

Hi Pedro, where did you get the red plate insert? Thanks 😊 great job

[@WoodYouDoIt]

Hi, thanks for your comment 👍please subscribe the channel 😉 i bought it on Amazon, but is not available anymore from that seller . But you can find it on Banggood. Consider that for this makita router is a specific model because of the distance between screw holes.

[@designlovedesign5140]

@@WoodYouDoIt yes I have the same one. Thanks

[@Petrus7277]

Well done.. Question.. what's your table surface made from?

[@WoodYouDoIt]

Hi Pettus, thanks 👍. It's Valchromat.

[@Petrus7277]

@@WoodYouDoIt wow.. I love it .. great job and thanks again..

[@WoodYouDoIt]

@@Petrus7277 thanks

[@crumpeteer6477]

Good job. What make/model is the insert plate? A link would also be helpful. Thanks.

[@WoodYouDoIt]

www.banggood.com/233x117x8mm-Aluminum-Router-Table-Insert-Plate-for-Woodworking-Benches-RT0700C-Router-Trimmer-Red-p-1295961.html?cur_warehouse=CN&rmmds=search&p=LX111949011782202011&custlinkid=1579146

[@crumpeteer6477]

@@WoodYouDoIt Thank you. Much appreciated.

[@danielekberg3329]

Hej Pedro, where sid you get the router Plate? Najs job by the way.

[@WoodYouDoIt]

Hi Daniel, thanks for your comment 👍please subscribe the channel 😉 i bought it on Amazon, but is not available anymore. But you can find it on Bangood. For this makita router is a specific model.

[@pakys971]

Buongiorno complimenti per il video, mi puoi dire dove reperire la piastra in alluminio? Grazie

[@nataschas.6560]

Ciao Pedro, con quale taglierina hai fatto il ritaglio? Cordiali saluti Natascha

[@WoodYouDoIt]

Vedere il minuto 5:23

[@W4TRI]

Where can I buy the red plate? Very nice!

[@WoodYouDoIt]

Hi Ron , thanks for your comment, please subscribe the channel. I got mine from Amazon but the seller is not active anymore. Try to search Google for "aluminum router plate makita rtc0700c" but be careful with the distance between holes on the plate, they should match you model. For makita is a specific one. Check that.

[@carlosmarkes]

Com uma placa da JessEm é que era :D

[@WoodYouDoIt]

Isso é que era :D

[@richarnaud7794]

HOW DO YOU DO THE CUTOUT WITHOUT A BEARING ON YOUR BIT? DONT YOU CUT INTO THE SIDES OF THE JIG?

[@WoodYouDoIt]

I've used a guide bush. The guide bush is essentially a circular flange, usually between 10mm and 40mm outside diameter, which fixes to the router base and acts rather like a small ring fence. The cutter plunges through the middle of the bush and the outside edge of the ring runs against the jig or template, to position the cut.

[@rawframeshandcrafted]

Pedro what router is this? The RT0700CX?

[@WoodYouDoIt]

Rtc0700c

[@jbradshaw7]

Got a link to the plate you used?

[@WoodYouDoIt]

Hi Jeremy. Thanks for your comment. Please subscribe the channel 😉 you can see here banggood.app.link/n9KSmXhhTbb

[@jopperdepopper]

Any lifting solution that works with this?

[@WoodYouDoIt]

Not that i know. I do manually.

[@dutchducks5451]

We're can you buy this plate? Great build btw

[@WoodYouDoIt]

You can buy here www.banggood.com/custlink/33vyLNuE9g

[@dutchducks5451]

@@WoodYouDoIt thanks! It's on his way!

Hello, a noob's question : what is the name of the "wood" you use please ? thank you for your answer :)

[@WoodYouDoIt]

Hi Herve, thanks for your question. Please subscribe to the channel 😉. If you are talking about the grey one, it's Valchromat. It's a coloured MDF but more resistent to impact and moister than regular MDF.

@@WoodYouDoIt thank you very much

[@user-lk6kl4pp8n]

Что за материал такой серый ?

[@WoodYouDoIt]

Valchromat