Penn Spinfisher VI 6500 Live Liner - Part 2/2 Reassembling - Reel service and maintenance -

[@StewartKumar]

Great video man! Definitely subbing cos you're doing a fantastic job of explaining the necessary procedures. I service and maintain my own reels at home so this is invaluable. Small tip I picked up from the RC hobby, if an o-ring or seal has expanded slightly after cleaning, just pop it in the freezer for a few minutes and it will shrink slightly, making reassembly/fitting easier. Keep up the great content!

[@craigwheaton2506]

Good man

[@riskurangler]

when im using the lightest rear drag.. the LL clicker sound feel weird, sounds like the main clicker not seat properly in place... its sound normal when im using more LL(rear) drag.. can you diagnose where the problem? i need use the lightest setting, its okay with that weird clicker sound ?

[@solunaranglingconfidante417]

Its not a problem. This reel have 2 clickers. The spool clicker and LL clicker. If the LL is too light, the LL system might not engage. What you're hearing is spool clicker. Same thing happen when the LL drag is higher than spool drag, the LL system will not engage as well (meaning if you set the spool drag at 1kg but the LL drag is 1.2 kg, then the LL might not engage or it might go on and off).

[@riskurangler]

@@solunaranglingconfidante417 thanks for the respon, i already understand that condition you have explained. but this is different. the sound at level 1 (lightest) is different at lv 2 or 3.. the sound not solid as lv 2 and 3.. its no matter to me im just worried it will affect performance after long use

[@riskurangler]

im testing with heavy spool drag setting in this situation

[@solunaranglingconfidante417]

@@riskurangler understood. Unfortunately LL system was designed as such. Not much can be done. I usually never use lvl 1. I always set at lvl 2 or 3 because lvl 1 is soo light that sometimes it displaced to lvl 2 with a light touch. If you need lighter drag at lvl 2, you can adjust the tension using the key provided with the reel. I always set lvl 2-3 around 0.5-1kg for livebaiting spanish mackerel and billfish. Lvl 1 and lvl 4 I never bother.

[@riskurangler]

@@solunaranglingconfidante417 i'll test mackerel/king tomorrow its my first time using LL.. i hope lv 2 is light enough for 3-4kg mackerel