Milking Cows and Feed Mixer Repairs

[@Its_Me0000]

Good Morning - Great haircut, you look sharp.

[@Kevin986_]

Love all of your videos. You are a hard worker. Great to see

[@frasermathers2287]

Hi Trenton, glad you have got over your wisdom teeth extraction and the pain that came with it. Was good to see you and your dad replacing the mixer blades and doing the repairs. We even got to see that you do have two hands, as usually we only ever see one as your holding the camera. 😂😂. Thanks for the clips of the milking which I really miss doing. Don't worry about not being able to make too many videos, I am sure your viewers understand that school is important and we will always be here for you. Thanks from Scotland.

[@Its_Me0000]

Welding is a high demand skill. Well done.

[@irvenrathburn9421]

Good video Trenton, always enjoy your videos have a good school year see you in the next one.

[@deionsharpe5139]

Hey Buddy, hope your mouth gets 💯% better, I had to have ALL 4 of mine taken out at the same time because they were embedded, BAD, and after the antiseptics wore off it HURT for a couple of days, , so I know how you felt there, anywho, hope you have time to video on the weekends during the school year, this channel is really fun and interesting to see 🪴 grow , BE SAFE and CYA soon Next TIME 👍✌️🚜🌞😎

[@alfredomarotta6604]

Thanks for sharing Trenton. Always enjoy your videos, glad you're feeling better.

[@shawnclark7051]

Polemer would be great that's what we put on the bottom of an airboat just a suggestion keep up the good work Trenton

[@kenlynch6332]

Trenton, finishing school is more important than making vlogs. You have many loyal followers because of the content and the informative presentation, the viewers will be here whenever you are able to post. Have a good school year 🚜 🚜 🚜🐄🐄🐄🐄🐄🐄🐄🌽🌽🌽🐄🐄🐄🐄 🚜 🚜🚜

[@Zeke-yv3nw]

Trenton film anything you can and we will watch it to help keep your views up. Glad you got over getting your wisdom teeth out.

[@Alfa-Gdog]

Hey Trenton, wisdom teeth extractions, ain't no joke, been there done that. I learn a lot from you because you explain things well, I'm not so good at the mechanical side of things. Don't worry, Junior and senior year tend to go by much faster, you'll see. Just make whatever content you can and we'll watch for sure.

[@clintonchristopher138]

Always good videos Trenton don't worry about YT School and Work come first when you post videos I'll be here to watch em y'all cutting corn now ain't you

[@joeandjudygreen5398]

Enjoyed your video. Anything you put out in always interesting. Keep it up.

[@bl4565]

Nice Job on the fe mixer.. And nice tractors on the farm.. I like really your videoes with the milking routine you works so good with the cows.. Best regards J.. I have not seen your profile for long sorry.. i must tjek all videoes Best regards J.

[@MorganOtt-ne1qj]

Big hint to Kooima Ag!😂 They should be happy to support you, even a little bit. They are a good company to deal with, and $ave the customers with their products. Good luck in School, and I am glad you are feeling better after the wisdom teeth were taken out.👍👍

[@danamartin9734]

Great video keep making them as time allows look forward to ever one you make😊

[@terryhobdy5727]

Good video I always enjoy watching them.

[@HootMaRoot]

My father used to keep an old toaster oven in the workshop to dry out welding rods

[@steveddavis]

Cool to see the blades being changed. Your videos keep getting better 👊 You need a self-propelled, self-loading mixer/feeder 😉

[@steveneal2706]

Awesome video Trenton. thank you and I think you do a great job. Hang in there buddy

[@carlvictorius6394]

I’m sure your plate is full with school, farming and other stuff. Love your videos. If you only have time to post a couple drone footage harvest videos this fall that will be enough for me.

[@derekaldrich4887]

I hope you don’t get heatstroke with your black jacket on Trenton you are the best person ever on KZbin

[@RoMaxFarms]

Great to see the cows, they look good.

[@allproearthworks8550]

Get you a Lincoln flux core welder for the small jobs it would wor great on that thin metal.

[@r.scotthill3082]

You should look into a baler with knives which would be less expensive than a silage system, but if you say the mixer is going to have to be replaced that would be a major expense that will probably need to come first

[@aaroncliff4883]

good job I have to say on everything from welding to milking to tractor ac repairs for a kid your age

[@steveketchum9836]

I had 2 patz vertical mixers. Traded them both when they were 5&1/2 years old

[@juliantorres8403]

Hang in there ,even if you don't think stuff is interesting to vlog just log it and post it what you might think is boring and not interesting can be entertainment for others like me I love ranch life I like to see what other people go through and their lives and it's good entertainment so hang in there keep up the good work

[@michaelmartineau1373]

A old refrigerator with a light bulb inside works as well as any rod oven just saying

[@DavidShaver-u4r]

Very good farming channel !

[@bobthebuilder5779]

Milking is the best part of the videos

[@chargermopar]

When I was a teen they wanted to pull my wisdom teeth, I refused. They eventually grew in just fine! Fabricating and repairing are important farming skills. As for KZbin who cares about pumping out content? it's a hobby and in 17 years I have never been compensated at all. My goal was and is to physically meet interesting people. Maybe one day it will happen!

[@nowhammies]

Where did you learn to weld? Great video!

[@wendydeskins]

Great video! Glad you are feeling better. Do you have to milk the cows before you go to school?

[@pennsylvaniadairyman2290]

@@wendydeskins Thank you! Yeah I milk before school.

[@danl9334]

great video, thank for sharing!!!!!!

[@benedict_323]

Only two years left at school, and then you'll be going to college, and you'll get your own flat.

[@MorganOtt-ne1qj]

I'm guessing you are British or Irish? The "own flat" is a clue. And you are 100% correct, the young man is going places! I loved the comment. 👍

[@wolfpacva]

Hope you are feeling better now. Sure is not fun having wisdom teeth removed. That is not thin metal you should try to weld sheet metal then you will become a master welder. 6011 rods would have been much better to use and damp rods never weld correctly . Two more years in school will go by quickly. Do the best you can with putting out videos your school work has to come first.

[@JDH3666]

Trenton. What breed are the red and white cows in your heard?

[@allproearthworks8550]

10th generation dairyman has a nice mixer for sale.

[@carl4323]

I've got to make a comment to improve the algorithm! You mention that you think it would be a good idea to have a new feed grinder. I have seen that you don't go into the financials of the farm. I have seen that there are a lot of dairy farmers now who run 'Factory farms'. My cousin has one in Bridport Vermont. I imagine that with your operation size, there isn't a lot of profit to throw around on new mixers. I am curious about who will inherit the farm? Will it some day be yours? I can't stop from thinking about how the financials are taken care of. Best wishes; graduation is not that far away!

[@RobertCowden-y3c]

Tell ur dad to buy you a mig weller 8:52

[@randybennett5417]

How many cows are ya milking now ?

[@henrithelion]

Robot milking?

[@classicalmidiorgans]

You mean : no more wisdom left ??

[@MhmdeKaml]

Who saw my comment, please help me find a farm work contract.🙏

[@RobertCowden-y3c]

You guys are way behind on a milking palor also it's like you are taking away but never putting back in to the farm. You farm all you have is a bunch of tractors that need replaced .

[@WoolyBully62]

Exactly what kenlynch6332 said. I know I’ll stick around