Perception 11.5 Outlaw mods and steering control box.

[@phillipa7595]

I needed a review from a a fellow big guy and you delivered sir! Good content. Love it

[@Video-Bass-fishing]

Thank you. If you have any questions reach out to me. 903-268-2198. Tell some one about our channel. Thanks again for the compliment

[@B.A.Bassangler]

Great looking rig. Sorry but I can't help myself, I used to be an engineer...it's modulator. Now that I got that off of my chest, lol, it's really impressive to see how kayaking has gone from DIY to overpriced, and back to DIY. I'll take an Outlaw, or a Pelican with a homemade Minn Kota anyday, over a 3k yak with another 2.5k for a crap Torquedo with a 1/4" shaft. Patent that steering box, brother!

[@yakkittymack]

Good job my friend! That's some ingenuity right there!!! After spending 9 hours on the water last weekend in my 106 PDL, I'm seriously considering adding a motor for getting to and from spots.

[@erekmateo6984]

I love the input but would prefer to see the working mechanisms at a closer view. Some people are great at doing these type things but i need to see some of this at a closer perspective. Thank you for sharing. You have the potential to doing so many cool things with your kayak.

[@Video-Bass-fishing]

I will do a more in depth video this coming week and break down each step. I’m going to be building one for a new kayak I’m putting together.

[@Aksmaniyak]

Nice work and the steering box is great idea. You will increase your turning radius of the kayak if you rotate the NV steering arm 180 degrees so the at the point is facing forward. It is mounted backwards.

[@017endless]

thats why people said OLD IS GOLD.... 😊.. i thank you for good DIY idea of yours. gonna start mine soon. .. cheers!

[@Video-Bass-fishing]

Hey, I’m appreciative that I can help you out. If you have any questions just give me a holler brother.

[@mutinyrider666]

Have a similar build and love your idea to steer and might try it .ive got a pole attached from the motor to a trolling motor extender handle mounted verticly that pivots like a stick shift and retracts when i lift the motor and this just seems more interesting. Ran all my wires and cords straight into the hull and they pop up where needed and cant recommend that enough .amazon had some cheap connectors that are glued into the kayak so you can just drop in the motor and battery at different ends and plug them in right there and plug the pwm in under the seat and they're all wired together internally and out of the way .wish i had gotten your coloe to match my jeep but those are a hard find lol

[@24hrMusic]

I like your steering system. Simple and functional.

[@Video-Bass-fishing]

It’s simplistic but it works very well

[@ronsolbergfishing]

Great idea! I have a similar set up on my OT 106. I steer using the kayaks rudder (motor locked in position). I might add your steering idea in I use the kayak without the pedal drive.

[@Video-Bass-fishing]

Great thank you for the comment. If you need some help on that reach out to me

[@AllenJohnson-wm1fc]

Do you have a better picture and description of how your Pmw is mounted to your kayak?

[@Video-Bass-fishing]

@@AllenJohnson-wm1fc yes sir I used a short ram mount arm and two ram balls that screw to the kayak and one to the PWM. I will try and get you a picture soon. I’m at work for the next three days. I’m a paramedic.

[@cutley2b]

Do you have the links for the items. Don’t see it anywhere. Am not sure exactly what is needed for the inner workings of the steering box.

[@Video-Bass-fishing]

Hey bud give me a shout I’ll tell you what I used 903-268-2198.

[@TGOESFISHING]

@@Video-Bass-fishingany chance I could get the links too?

[@scottstubbs9800]

Your ideas are very smart. I like how you came up with them to keep the storage space clean. I was just wondering where do you keep your battery at?

[@Video-Bass-fishing]

I built a custom battery box that goes underneath my seat. I’ll be glad to see the video of it and show you how it works.

[@scottstubbs9800]

@@Video-Bass-fishing is that this black box under the seat in the seat riser video?

[@Video-Bass-fishing]

Yes sir that’s it

[@NorthWoodsWes]

Great vid & great mods. But your mod links for each mod aren't actually listed in the description box. That's just the timestamps for each mod time in the video.

[@Video-Bass-fishing]

I’ll get those for you if you’ll email me at [e-mail]

[@gravy4212]

👍

[@allensee4175]

No links to parts

[@FScammell3]

I cant find decent pulleys for paracord. Anyvlinks?

[@Video-Bass-fishing]

www.amazon.com/RANDDER-Pulley-Anchor-Trolley-Blocks/dp/B092SV2ZLV/ref=asc_df_B092SV2ZLV/?tag=hyprod-20&linkCode=df0&hvadid=652500684677&hvpos=&hvnetw=g&hvrand=7136923460600108222&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9028312&hvtargid=pla-2066762642537&psc=1&mcid=81f6c43aa5c53eca9393b5ca8963ce0c

[@FScammell3]

@@Video-Bass-fishing Thanks I saw those but didnt see a good way to attatch them and they seem kinda pricy for as many as you used.

[@Video-Bass-fishing]

@@FScammell3 yeah but they squeak or rattle because they have teflon bearings. I attached mine with heavy duty zip ties.

[@JohnMain-c3t]

I'm not getting the measurements for the inner working.

[@JohnMain-c3t]

I when to Lowe's to get the parts but the way I understood on the measurement it would not fit in the box

[@Video-Bass-fishing]

Here’s a link for the box from Amazon. www.amazon.com/Waterproof-Electrical-Electronic-Enclosure-3-94x2-68x1-97/dp/B089K9LM5W/ref=asc_df_B089K4KCQK/?tag=hyprod-20&linkCode=df0&hvadid=693410589815&hvpos=&hvnetw=g&hvrand=11499210594515394189&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9028153&hvtargid=pla-943841640608&psc=1&mcid=7fd77dbbeb45387e80b9471b26270f2c&gad_source=1&th=1

[@WistfulKnave]

@@JohnMain-c3tso what do you take the top of the trolling motor apart?