PERFECT BUDGET PC CASE | DEEPCOOL MATREXX 55 MESH REVIEW

[@PulsarTECH]

* Please like, comment, share & subscribe!!! * If you would like to support my channel please use SuperThanks! Thank you!

[@ordinarypeople801]

That's how a case review should look like - short and clear!!!! I hate those 20-30+ min reviews 🤢🤢 Keep it up!!! ;)

[@PulsarTECH]

Glad you like it. Thanks for your feedback!

[@PistonShack]

Thanks!

[@PulsarTECH]

Thank you very much!

[@FishTailTaco]

I bought this end of last year. Great case imo. Only issues I have is trying to hide the daisy chain cables from the case fans and the outdated molex power supply for them. Other than that, there is plenty of room for a 7900 xt!

[@PulsarTECH]

Thanks for the update!

[@SSKGamingYTLive]

How about the air flow through front panel ???

[@engineeringcanada]

Very good review! Indeed a very nice case for a budget PC build 🤠 thank you

[@PulsarTECH]

My pleasure!

[@furiousinsects6386]

Thank you! nice, short, informative. You rock sir! subscribed.

[@PulsarTECH]

Thanks for subscribing and for the kind words!

[@skrilantic291]

I have this as my pc case, only downsides of this case is that the rear pci slots can not be reattached once removed, from a cleaning perspective the way the front mesh panel hold the front dust filter (mine came with the filter) is not ideal because if you want to remove the filter you have to bend the metal arms attached to the mesh that are located behind the inside of the front panel, bending them open and closed will cause them to break, they are not that durable (I know this because i bend metal similar to this before and they broke), I would have preffered that the font dust filter was also magnetic like the top dust filter (it would have made cleaning the case a whole lot easier).

[@PulsarTECH]

Thanks for the update! I have mentioned this in my other video while assembling this PC.

[@chinozerus667]

Thanks for the review. Exactly what I need.

[@PulsarTECH]

Glad I could help. Thanks for your feedback.

[@Brainrot-xy4zq]

Really good video man love from belgium

[@PulsarTECH]

Appreciate it! Thanks for watching.

[@paulpaolo7817]

U can't mount 3x 140mm fans in front outside the frame. (if i said that correctly)

[@PulsarTECH]

That's right, only 2 x 140mm or 3 x 120mm at the front

[@thecoolmaker]

Hi, planning to build my new pc in this case. I see you AIO has the radiator on the inside of the case, so you take the air from otuside the case and push it in. What is the AIO you are using? I was planning to get a Liquid Freezer III 360, but the fans are in the opposite direction, so it looks like it would be taking air from inside the box and pushing it out, which is not optimal. Should I look for a AIO like yours?

[@PulsarTECH]

Hi, good questions. Ideally, it would be nice to place an AIO on top with fans blowing air outside the case but I have transferred this Thermaltake AIO 360 from my old case that was a full tower case. The only place a 360 AIO would fit properlyin this case is in the front with fans blowing inward. Usually on such AIOs you can manually choose the direction of air flow depending where you mount the fans. Just keep in mind that the amount of fans blowing in should match the amount of fans blowing out, otherwise it will not circulate well. With my system setup the temps are staying low.

[@vainhunterx4643]

How do you light up the power button i see that it can light up am i missing something or something isnt plugged up right?

[@PulsarTECH]

Hi, here is a link to a full assembly video for this case. Check it out. Hope it will help you!

[@PulsarTECH]

Deepcool Matrexx PC Build kzbin.info/www/bejne/iX-0mp6CoMqAj9U

[@c.thanga2k]

Will Deepcool LE520 240mm fit at the top and not block the Rams?

[@PulsarTECH]

Yes, the Deepcool LE520 240mm liquid cooler should fit at the top of the Deepcool Matrexx 55 Mesh case. The Matrexx 55 Mesh is designed to support up to a 240mm radiator at the top, making it compatible with 240mm AIO (All-in-One) liquid coolers like the LE520. Just ensure that your motherboard's components and RAM do not obstruct the installation of the cooler in the top position, as some motherboards or RAM configurations might limit clearance.

[@Sira_Kackavalj]

What connectors to the stock coolers that come with the case use?

[@PulsarTECH]

There were no stock fans with this specific case. I'm not sure about the 3F & 4F versions.

[@Sira_Kackavalj]

@@PulsarTECH Seeing the daisy chains on the back end I assume its the ones that go on the motherboard, not sure if they are 3 or 4 pin ones

[@PulsarTECH]

@@Sira_Kackavalj no this one had only usb 3.0 & 2.0 connector + Power & Reset button connectors that connect to the motherboard. If you wish I've got an assembly video for this case you can check out kzbin.info/www/bejne/iX-0mp6CoMqAj9U

[@rinat69]

whats a good case for 120mm fans? i got an arctic p12 5 pack and i want to use it

[@PulsarTECH]

I find the DeepCool Matrexx 55 Mesh to be a perfect case. You can install up to three in the front and two on top, which should be good. Plus, one at the back would be nice as well for better airflow.

[@JDFiv]

Hey there, I wanted to ask if you can remove the whole drive bay so you can fit a modular psu as the cables cannot fit in my case? I saw that there're some screws on the bottom of the case but I'm not sure if they're for the Drives. Thank you in advance!

[@FishTailTaco]

They’re removable, but they’re rivets. I did it, took some time. Make sure the case is empty

[@PulsarTECH]

Hi, unfortunately no it's not removable by screws but if you need to get rid of it you can carefully drill out the rivets and then if you need to put it back just use a couple of screws with nuts. Hope this will help!

[@dusanhuruban6380]

Very good video thanl you for help!

[@PulsarTECH]

Glad it helped!

[@adityakad9096]

I have same cabinet how to connect to motherboard

[@PulsarTECH]

Good question, here's a video on how to assemble a PC with this case kzbin.info/www/bejne/iX-0mp6CoMqAj9U Hope this will help!

[@deivytrajan]

How many included fans does this case fas?

[@PulsarTECH]

Depends on a model. This one has none, but there are models with 3 and 4 Fans.

[@KOHL1_]

How to open its front panel for cleaning ???

[@PulsarTECH]

Usually you don't need to open it for cleaning, just use a vacuum cleaner. But if you need to access the fans behind, just pull off the front panel as shown in the video.

[@KOHL1_]

Thank you for information❤

[@mikegraham4255]

With an ATX board, is there space for a total of 5 3.5" hard drives? (I don't care how it looks lol)

[@PulsarTECH]

Well, if you don't mind how it looks, there is plenty of room to fit 5 HDDs. Two of them can go into the HDD bay, while the other 3 might be positioned awkwardly, perhaps even vertically, depending on the size of the graphics card. Hope this helps.

[@ankita_156]

How is it compared to the lian li lancool 215 ?

[@PulsarTECH]

I was looking into Lian Li Lancool but then decided to try this case and happy with it 100%. I don't think there's any reason to spend more money for Lian Li unless you want a White case maybe, I don't think Deepcool has white color case option. I would rather invest into a good water cooling system for the CPU.

[@ankita_156]

@@PulsarTECH Thanks for the suggestion. I will stick with the Deepcool itself instead of spending extra for Lian Li

[@ankita_156]

@@PulsarTECH Hey. I have a question regarding this cabinet. At 6:20, is it possible to completely remove the HDD/SSD shroud bay case from the cabinet ?

[@ankita_156]

I mean the entire thing

[@PulsarTECH]

@@ankita_156 no it's riveted, but why would you need to remove it? What do you want to put there?? You can check my video how to assemble a PC with this case, it's on my channel

[@GirthyJP]

I cannot get the fans to work, the rest of the pc works perfectly fine. Anyone know how to fix this issue?

[@PulsarTECH]

Have you got the one that comes with fans already or did you buy them separately?

[@GirthyJP]

@@PulsarTECH stock fans

[@Evangelion01]

do i need fans for this case or it can go without them for a while?

[@progamerpro4129]

it has case fans so you dont need it maybe you cool do 3 under the gpu

[@PulsarTECH]

You would need to keep an eye on the motherboard, drive temperatures and so on. Since PSU, Graphics card and CPU already have their own fans, you might run your system without additional fans if you don't install the side panel but gotta watch the temperatures carefully.

[@emanuelcodarcea5937]

Hey man can you help me. I ve just bought this case and i can t get the back panel ( behind the motherboard ) to open. I tried sliding it like i ve seen on yt but it won t budge.

[@PulsarTECH]

Hi, there are only 2 thumb screws that are really holding the side panel, so once you take them out, you should be able to first pull it backward and then take it out. Maybe there's something stuck there, try to tap it gently. Besides that there should be any problem. Let me know how it goes!

[@emanuelcodarcea5937]

@@PulsarTECH Thank you for the response, i was a little more aggresive and it worked. Now my mobo desn t read the ssd :( my first build is a little bumby:(

[@PulsarTECH]

@@emanuelcodarcea5937 is it M.2 NVMe or SATA SSD?

[@emanuelcodarcea5937]

@@PulsarTECH It is an nvme. I ve just bought another one i hope maybe it was because of the ssd not the mobo. The ssd was a teamgroup mp33 and apparently according to their site it doesn t have compatibility with a lot of mobos so i hope it was just because of this error on my part. Now i ve bought a samsung 980. Fingers crossed🤞

[@PulsarTECH]

@@emanuelcodarcea5937 good, let me know how it goes! Some SSDs don't have very good compatibility with some motherboards.

[@forreigncarrot235]

Can you remove the case's standoffs?

[@PulsarTECH]

Do you mean the standoffs for the motherboard? If so, then yes, you put the standoffs yourself where you need them depending on a type and size of the motherboard.

[@forreigncarrot235]

@@PulsarTECH the case has 6 pre installed standoffs for the board right? So its removable?

[@jordanmntungwa3311]

I'm sold. but first I must try and get the parts for the PC

[@PulsarTECH]

Good idea!

[@skeypro9930]

Можно попросить тебя помочь мне с проблемой? Я просто уже в отчаянии немного) второй день мучаюсь с m.2 ssd и не могу поставить на него винду)

[@PulsarTECH]

Привет, 1) во время установки еще какие-либо диски подключены кроме флешки? Если да, то нужно убрать все дополнительные диске. 2) Проверь также есть ли обновления для БИОСа. 3) Если на материнке есть еще разъем М.2 попробуй установить в него. 4) Возможно виндовс не устанавливает все необходимые драйвера, попробуй другой виндовс установить. 5) Можно попробовать поставить линукс минт, а затем удалить его и установить виндовс, были случаи когда это помогло. Надеюсь, что-то из этого поможет! Дай знать.

[@skeypro9930]

@@PulsarTECH Спасибо большое, вчера наконец-то нагуглил ответ. Оказалось, что когда я изначально ссд этот вставил в ПК, то я для проверки создал том на нем, т.е. разметил в Винде. И оказывается из-за этого она по какой-то непонятной мне причине не ставилась.. хотя я даже при установке все разделы каждый раз удалял, полностью форматировал,чтобы показывало просто свободное пространство. Но в итоге получилось.. вот)

[@PulsarTECH]

@@skeypro9930 Отлично!