Perfect Curves from Huge Blueprints You've Never Seen Before | Blueprint Shifting

[@Kinstruction]

As of 11/11/2024 this NO LONGER WORKS. It was fixed in patch 1.0.0.6. End of an era. I just had used it to create a huge blueprint, last one I'll make. At least we have mk III blueprint designers.

[@Tropcooks]

well that sucks. Thanks for informing future watchers tho!

[@pobkac]

Dude, thankyou so so much. Glad they helped.

[@Kinstruction]

Thanks for the inspiration! Its crazy I saw that video when it had like 200 views lol. Keep up the mad scientist vibes. Its crazy there's still so much to learn about this game.

[@brodriguez11000]

It's thinking outside the box. Hopefully coffee stain doesn't remove it.

[@Kinstruction]

Laterally thinking outside the box lol. I'm sure they'll remove it lol

[@ZombiePanda1776]

Oh wow. This is a game changer literally and figuratively. I’m 1500+ hours in this game and never knew this was possible.

[@Kinstruction]

I know. It's crazy.

[@096EDWIN]

Naaah bro, I hope this goes viral. I loved the info you shared on this vid. Thank you so much.

[@Kinstruction]

I hope so too! lol glad you enjoyed. 😁

[@shoki3704]

Saw the video from Pobkac a few days ago and wondered how far it could go. You have inspired me to make something similar in my own world. Thank you for sharing your beautiful creations!!!

[@Kinstruction]

Yea. Well its only been a few days, I think it can go a lot farther. 😁

[@nobodyshome6562]

Wow. This is fantastic. Great job. Loving the videos.

[@Kinstruction]

Thanks. Glad you're enjoying them.

[@just_archan]

Just found your video, while i also discovered first great video of that blueprint expansion video you mentioned. So i ALSO made circular roads (got already 5 degree large roundabout, also finished smaller 10 degree). I maded fully assembled road blueprints, with pilar barrier. So few tricks i learned during design: To have PERFECT lines, edge of circle instead on outside, should be on center of center foundation. Outside gaps are easy to fill with half blocks. I have fillers embedded in blueprint. To avoid clipping, i use methode of rising "1mm": Place pillar on the block that should be UNDER, then from really close grab a barrier and pointing on pillar place it in exact moment when it change color from yellow to blue. Rise is basically invisible, but there is no more clipping, and more important, there is no issue with patterns anymore. To make perfect barriers, first i cut from circle 3 sections. Then bring it back to blueprint designer. I place pilar centered on foundation for outside edge, then fill the gap using beam method. For that you need only two sections, but for inner edge, best nethode is to skip one section, during initial placement, then just fill missing section using beam methode.

[@Kinstruction]

This is why I always suggest people make their own blueprints. You'll for sure find things that other people haven't thought of. Good work.

[@Glidercat]

Thanks! For this!: 06:08 and this!: 17:20 Awesome job and very cool that you credited the creator that planted the seed. 😺

[@Kinstruction]

Thank you for the tip! I forgot about running that cart off the road lol

[@Kinstruction]

1.0 UPDATE: I have confirmed, this still works in 1.0. The extension principle still works. If you're having an issue, join my discord and post screenshots and I'll walk you through how to do it.

[@PANDAMX21]

can you work on the worldgrid with this technique? because with some curves you cannot connect highways properly.

[@devilwarriors5164]

Your discord invite link is dead

[@Akubabu]

I get "This blueprint has no cost" when I try to do this.

[@gambit6888]

I can rotate blueprint only for 90 degrees, even with control((( And yes, i place it on foundation

[@DadGamingYTube]

I love him to. The ways he test this game is crazy, so crazy that just to place one blue print, the game used 97GB RAM

[@Kinstruction]

Nice. I'd like to see that BP lol. I thought I was a blueprint mad scientist, that guy is great.

[@DadGamingYTube]

@@Kinstruction check his Twitch most recent streams

[@Kinstruction]

Thanks, I will.

[@Victim-bv2cp]

The application of this is endless. Time to start a new save!!!

[@Kinstruction]

Yea its pretty cool for sure. Good luck with the new save! 😁

[@Bucko2614]

That sounds like me too. I come up with a new idea and then start a new save. I never actually end up finishing many playthroughs, I keep starting new ones 😂

[@Kinstruction]

Yea. It's hard to press on sometimes.

[@sabdam2629]

Mon dieu.... c'est complètement fou. Merci thank you. L'ellipse je ne suis pas prêt techniquement. Gg

[@Kinstruction]

Thank you. 😊

[@idirhouari3878]

Hey man, just wanna say that I discovered your videos today and I must say they are so good ! Definitely deserve a lot more viewers considering the crazy work you put into them ! Your let's play is a gem thank you for that

[@Kinstruction]

Thanks man! Appreciate it.

[@FloydRinehart]

15:18 “I love him… I love him very much; he is amazing.” Me {mesmerized}: I love him, too….

[@Kinstruction]

lol

[@marcmtl911]

The Imperial symbol on your platform. You are instantly my new favorite KZbinr!!!

[@Kinstruction]

lol thanks.

[@brianii5809]

Beautiful work. I saw pobkac's video the other day too and thought it was interesting but you took it and applied it on a huge scale that I didn't envision. Inspiring stuff you're doing over here

[@Kinstruction]

Thanks!

[@xazutenno7445]

this is so awesome! i love that train helix! WOW!

[@Kinstruction]

Yea that train helix is for sure going into my main playthrough for my trainlines up and down the plateau.

[@Lion4de]

I don't even play this game but dang man, mind completely blown! Looking forward to the rest of this series!

[@Kinstruction]

I'm glad. 😁

[@dpmoore99]

Not gonna lie that helix at the end is kind of sick! My brain started to think of how to have stop offs at different layer intervals that would work at the cliffs at the red forest down to the grassy plains or from the red forest down to crater lake...my mind is moving faster now than I can think of a solution to multiple logistical verticality issues...Thank you for the insight this will increase my blueprint game tons!

[@Kinstruction]

You're welcome. Glad I could help. :)

[@sokei4670]

Amazing Video with great commentary! really clear too thank you for showing me techniques i will use in the future!

[@Kinstruction]

Yea its really handy, I use it a lot for large but simple projects.

[@Neconor]

@pobkac MVP. @kinstruction MVP for sharing in detail and show the implemented use of it!

[@Kinstruction]

The stuff he makes is crazy. I am but a humble messenger lol

[@TheMDHoover]

That double helix train line! Chefs Kiss.

[@Kinstruction]

Yea, it turned out really cool lol.

[@decrypt83]

The 10 Foundations out is rather easy to figure out for the walls, but the "plus 7 meters" stomped me

[@Kinstruction]

So the additional 7 meters is to make sure the walls meet up perfectly with no gaps. Think of it as an additional foundation minus 1 meter (foundations are 8 meters). That distance will give you perfectly smooth wall curves. Experiment with it outside of the blueprint maker first, see if you can do it by hand. Then once you've got it, try doing it as a blueprint with the trick.

[@Rajathon]

I am just digging deep into blueprints and this is awesome!

[@Kinstruction]

Nice, I'm glad you find it helpful. I've got a few other guides on blueprints if you want to check them out.

[@JolanXBL]

There was a similar trick in Banjo Kazooie: Nuts & Bolts, for making large craft and vehicles

[@Kinstruction]

Nice. Never played that game myself.

[@__RDDR__]

Thank you very much for showing this - this is awesome :D

[@Kinstruction]

You're welcome. Glad you enjoy. 😀

[@Ouchmyback]

Beautiful!

[@Kinstruction]

Thanks

[@GTSwarley]

Wow so cool. Ty for the tips. Now we need to wait 1.0 😅

[@Kinstruction]

Yea. Looking like it's going to be great.

[@Leaf.Commented]

utterly Brilliant, Thanks you sir.

[@Kinstruction]

Thanks. Appreciate it. 😁

[@eagleeyeproductions2317]

This is pretty amazing, but I would still prefer that Coffee Stain just give us a bigger blueprint maker and some curved pieces. I have played this game over 900 hours and I hate the little annoyances that slow down doing simple things like making curved road, trains and buildings. It just shouldn't have to be a hack to do this kind of stuff.

[@Kinstruction]

Well, maybe one day! In the meantime, at least we can share tips and work arounds. 😁

[@eagleeyeproductions2317]

@@Kinstruction I agree and thanks again for sharing, but it seems like such a simple thing and players definitley want that option. C'Mon Coffee Stain, just do it!

[@Kinstruction]

If you haven't seen it, check out their video on what will and won't be in 1.0

[@moman49]

5000+ Hours in this game and still discovering some new tricks.

[@Kinstruction]

That's impressive, no joke.

[@NerdLFG]

Love this, thanks for sharing

[@Kinstruction]

You're welcome. Glad you enjoyed it.

[@Eatongee]

Thanks Kins, helps alot.

[@Kinstruction]

You're welcome!

[@GrebnevNikita]

This is amazing

[@Kinstruction]

Thank you.

[@viewer1288]

Fever dream.

[@Kinstruction]

Ironic, since when I recorded this I was so exhausted, it might have been one.

[@CowboyAccounting]

This is a game changer for you

[@Kinstruction]

It really is, I've been trying to work out how to do stuff like this forever.

[@brodriguez11000]

@@Kinstruction Curves really shouldn't be this difficult. They showed with rail and pipes it's possible to do good curves.

[@Kinstruction]

To be fair, there are easier ways to do curves, I just like the way this method looks better. But I know what you mean.

[@xtmtmxhut]

That double helix looks awesome. You goanna re-do the senate building?

[@Kinstruction]

lol, no, senet building is set. I'll use those for going up to the plateau and down.

[@rgcountdown]

Very cool, just goes against my no glitch policy. Maybe one day!

[@Kinstruction]

Hmm. I suppose I don't consider this a glitch. All rules are being adhered to and it's not a bug. But that's the best part of the game. We can all play the way we like.

[@JasonMerk]

very nice video. I tried to do some circles and I had trouble rotating the blueprint. I can rotate using control outside of the blueprint designer but not inside. How could you do it?? I am also interested in how you did the right angle curve, so I can apply it to my roads and train tracks. Could you do another video highlighting this technique?

[@JasonMerk]

watched the video again and got it. you rotate the foundation and build on the blueprint on the foundation. the blueprint can rotate on its own. very cool.

[@Kinstruction]

Yep exactly, and then for the 90 degree, build the whole circle, then delete what you dont want. You may want to leave a "counter weight" foundation in so its easier to find the middle. If you watch my vid you can see one random foundation to the left of center when I go to build the 90 degree turn. Thats to help me find center of the BP for placing purposes.

[@mymumbakescakes]

OMG AMAZING.

[@Kinstruction]

Thanks. Team effort with Pobkac lol.

[@gamerdweebentertainment1616]

This is insane

[@Kinstruction]

I know. I used the technique to make an enormous train spiral (even bigger than the one in the video) in my playthrough. 😁

[@mr.cowabungalo3248]

For Future comment readers when he says 10 foundations + 7 meters He is not including the center block

[@Kinstruction]

YES. Sorry!

[@rhonin210]

cool vid!

[@Kinstruction]

Thank you. I used this technique on my save just last night.

[@magusmelanie828]

Very nifty!

[@Kinstruction]

Thanks!

[@lokicube]

Love it

[@Kinstruction]

Thanks

[@bwabbel]

Wait are the 5 degree rotations also possible outside of blueprint mode or not? Because i tried doing a nice circle by hand and it looks ugly compared to this. The only way i found was to use road barriers and make 24 rotations and that somehow doesn't quite match up

[@Kinstruction]

Very possible. Do one 1m foundation on top of another and hold control while rotating.

[@owowhatsthis....3025]

🙏🙏🙏 This helps a lot.

[@Kinstruction]

You're welcome!

[@DesperoO]

TIP: you can use arrows to move locked hologram/blueprint around by 1m

[@Kinstruction]

This is very true. I think I used it a few times in the video. Additional tip. You can hold control while you use your arrow keys and it will move locked holograms .5m.

[@Raminmarciano]

This is amazing! Is this still possible in 1.0 or has it been patched out ?

[@Kinstruction]

OMG, I keep forgetting to try it. I'll do it soon and post a pinned comment. I've heard both yes and no lol.

[@OldIronShops]

i wonder if there is any way to do railway junctions with this trick perhaps a platform can be made out side the printer that would be big enough

[@Kinstruction]

Maybe. You could make the platform to build rails on later, but I dont think you can make the rails themselves that way.

[@OldIronShops]

@@Kinstruction well that's disappointing 🫤

[@Kinstruction]

Well, you could make small sections, kinda pre-lay up to the same width as a blueprint designer. You have to build a thing inside the designer before you can move it to the outside. Still, not sure if its worth the trouble, because so much would have to be built afterward anyway.

[@HSkraekelig]

I'm inspired :)

[@Kinstruction]

Good. Thats the goal. :)

[@stareSimulVelCadere]

Ah man, only works with really specific numbers. For example, you used the Hex Frame Window, and when you set it to that specific range outside of the blueprint designer, it fits perfectly next to each other. If you were to put it another instance outside of the designer, the windows would not sit flush with each other. I'm trying to do this with foundations but they can only go so far out of the blueprint designer before their sides no longer connect. It's a fault with the 5% turn radius. If we could go to 1% or half percents, that would be nice.

[@Kinstruction]

Yea, you gotta do whatever distance works for the item. But don't forget, you can do half nudges by holding control when you nudge. Should help you lock in the exact right distance for whatever you're building.

[@simonwatts248]

@@Kinstruction How did you figure out the distance? I know in the video you mention 10 foundations +7m. How did you figure that out?

[@Kinstruction]

Trial and error lol. I just adjusted the distances until the edges line up perfectly. You can half nudge them too if you want to get really crazy.,

[@Spleensgaming]

Would you be able to share these blueprints? This is sick

[@Kinstruction]

Yes, all my blueprints are available on my discord. Well all these blueprints at least shown here lol

[@pcmaster888]

how a bug like this wasn't fixed in the Experimental phase is beyond me

[@pcmaster888]

(just to be clear: I hope they never fix this, it's awesome :D)

[@Kinstruction]

Well, in fairness to coffee stain, this should be a pretty low priority Fix

[@grantdyer5082]

Holey "F" dude

[@Kinstruction]

ikr?

[@Reversolibra]

I hope one day they integrate blueprints into steam workshop for easier acces too ppls designs

[@Kinstruction]

That would be very cool.

[@Reversolibra]

@@Kinstruction do you share your blueprints?

[@Kinstruction]

I do. But just to my channel members. My blueprints and save files are pretty much the only value I can provide members.

[@Reversolibra]

@@Kinstruction oooh ok i get that 👍

[@Kinstruction]

😎

[@johnbacon1342]

Am I doing something wrong here because I can't seem to rotate the blueprint once I have it at the right distance.

[@Kinstruction]

You have to place it on something else, usually another foundation that is rotated in the orientation that you want. If you can join my discord and send some pics I might be able to help out more.

[@LexiQnTech]

Ok amazing now the main question is how much you want for your blueprint library :D ... coz i am not ganna spend time to doing this by myself

[@Kinstruction]

LOL well, like I say in my video description, all my blueprints and save file I reserve for my channel members, so to answer your question, $5 lol.

[@OldIronShops]

hemm i can get to the point where i have 4 foundations but i cant get it to do the incremental rotations even if i hold control down am i missing something here ?

[@Kinstruction]

Are you placing the BP on another foundation? I can't go directly on the BP maker. Has to be placed on a foundation.

[@OldIronShops]

@@Kinstruction ahh I just figured it out I was placing it on a foundation but though I could increment the bp but you must rotate a second foundation then place the bp on that one. There's a few hours I'll never get back. Lol

[@Kinstruction]

Yep. The BP itself won't rotate less than 90 degrees. Glad you got it working.

[@OpenCourse556]

How are people making blueprints bigger than 4x4?

[@Kinstruction]

Watch the video. Lol

[@Nonsanity]

How is this trick doin in 1.0, now that it’s out?

[@Kinstruction]

Haven't unlocked the blueprint designer yet in my playthrough. I'll update the pinned comment when I know for sure.

[@sinuswutz8595]

@@Kinstruction Still works like a charm with 1.0

[@Kinstruction]

Good to know!

[@zxzxzxxzxx]

@@Kinstruction I tried many times, but I failed I want to see a professional do it himself

[@Kinstruction]

I'll be doing it live soon in my VODs lol

[@pilotharibo]

Can you share your circle bps?

[@Kinstruction]

Yes, all my bps are in my discord. Link is in the description.

[@hockeystar8goals]

When I rotate 5 degrees I have a gap between my windows. I spaced them out to 87 meters. This is 10 foundations + 7 meters no?

[@Kinstruction]

Yes, that should work. What kind of gap are you seeing? Is it tiny or huge? Feel free to drop into my discord where we can share pics to help answer your question.

[@hockeystar8goals]

@@Kinstruction I ended up figuring it out. I did 10 foundations + 9 meters and this worked, so 89 total meter radius rather than 87

[@Kinstruction]

Nice. Well I bet some of the walls/windows have different coverage. And maybe the new engine changed things slightly. That's pretty close.

[@quintenrodolf6978]

Eh kin! Do you use fly in youre gameplay asswel?

[@Kinstruction]

In the star wars themed update 8 playthrough I did yes. I was building giant flying ships, was hard to do it without it. For the 1.0 playthrough I just started, no fly mode. :)

[@quintenrodolf6978]

@@Kinstruction Yeah ofcourse makes sense! I am loving your videos they give some good advice. I commented about me wasting my hours on designing roads. But this video gave me my answers! Thankyou!!

[@Kinstruction]

Good, I'm glad. Thanks for watching. :)

[@GreenPeteTV]

I don't understand why they don't make blueprints unlimited size. It's so silly that we need workarounds like this when factorio makes this so incredibly easy.

[@Kinstruction]

They say so that people can't blueprint entire factories. I get that, but I wish we had more options. Like a bigger blueprint if we don't include machinery or something.

[@GreenPeteTV]

@@Kinstruction i honestly don't understand why that would be wrong. Again, factorio allows it and it's not like people are not enjoying it. I stopped playing satisfactory because I just found it too needlessly difficult to make things look pretty 😩

[@GreenPeteTV]

@@Kinstruction great video btw ❤️

[@Kinstruction]

Thanks. :)

[@tracktaylor2783]

Ofc internet would find a way to build outside of the bp designer🤣🤣🤣

[@Kinstruction]

Its so useful...lol

[@angrygreek1985]

im too stupid to figure out how to use this how i need it how do I make a curved road that doesn't have such a large diameter curve??

[@Kinstruction]

move it "out" from the blueprint designer less before you start the curving/rotating technique. Try like 7 tiles out instead of the 10 or 11 I use.

[@angrygreek1985]

​@@Kinstruction I actually figured it out it's really tedious to do my roads that way, plus I am using a shitload of materials because the railings of my road are pretty highly detailed. with how much they overlap, though, I will need to redesign them or check the results with more degrees per step like instead of rotating it 5 degrees, do 10 I also tried the method of using catwalks on the edge of my roads to attach my blueprinted road sections to but it doesn't work so great. it works pretty nicely for a basic 1x3 zoop to get a basic road down, but for details ones it doesn't work so nice. maybe the 10 degree snap is too much...

[@angrygreek1985]

@@Kinstruction still trying to figure out if there's a way for me to get my road sections to save in the blueprint but because they are as wide as the build area I can't get them built "outside" of the area to duplicate them like you can do with the foundations or wall sections etc. cause going and placing the road sections is tedius AF!!!!

[@Kinstruction]

Yes I'd have to see it to really be able to help. You could come to the discord and post some pics. Maybe I can gelp now. T Y

[@angrygreek1985]

@@Kinstruction I ended up getting my road curve done. I even made 30 and 60 degree curves left and right. It was a real pain in the ass but I figured it out. They are saved as a complete BP. I don't even need to do any of the foundation messing around or anything, just snap them right on to the end of my straightaways. I also kept the ones that are out at the edge of the (for me) 6 foundation from center distance so if I'm in a weird spot and finding it difficult to snap onto the end of my existing road I can build 6 foundations out, 4 meters down and place the beam which is at the center of the BP down in the center of the foundation and it should be lined up out at the edge. the downside is they use a massive amount of resources due to the overlap of the beams and railings and all that. I'll have to see if I can reduce those down a bit in the original road cross section BP my 90 degree curve uses like 1800 concrete or something stupid like that lol

[@RichardTruth123]

does this still work in 1.0?

[@Kinstruction]

I'll find out soon and post a pinned comment.

[@RichardTruth123]

@Kinstruction cheers dude. I didn't think I'd get a response

[@Kinstruction]

I respond to every comment. 😀

[@RageToOverCome]

Do u think they will let this exploit stay in the game? Unless it's a pain in the arse to fix I think they will patch it.

[@Kinstruction]

Probably? But also, they might have bigger fish to fry? Also, when they fix it, I have a feeling they will fix the ability to make the blueprint, but not use ones that have already been made. So....better make what you want now! lol

[@DanielCoffey67]

@@Kinstruction Good job we can copy blueprints between saves then.

[@Kinstruction]

Yes you can. 😏

[@brianii5809]

I don't know why they'd try to fix it. Like Kin said, it doesn't exploit the game in a way that's unfair or takes away from the enjoyment, if anything it allows you to scale up more easily and build even bigger and better things without getting burned out

[@Kinstruction]

I could see an argument where they would, but again, fingers crossed they have other problems to get to first lol

[@michaelsotomayor5001]

Maybe these "builds" should now just be baked into the game. Or not but still it seems reasonable. Just have it be a part of the game since it open up the gameplay even more.

[@Kinstruction]

Well, we did get a bigger blueprint maker, so that opens up a lot of possibilities we didn't have in Update 8.

[@michaelsotomayor5001]

@@Kinstruction I will admit its revolutionary lol. Where can I find more blueprints? I've seen some builds out there that look like cyberpunk 2077 and I would love to find things like that. Thanks for the video tutorial. Wish you didn't cut out some minor things that seems important!

[@Kinstruction]

There's a blueprint repository. I've never used it, but I heat it's very extensive. Thanks for the feedback. Usually I get feedback that I didn't cut enough. If you've got any specific questions I'm sure I can answer

[@Grnademaster]

This broke the game for sure

[@Kinstruction]

Lol still going! My playthrough about breaks the game tho lol

[@Hansdampf1337]

Has this been been fixed?

[@Kinstruction]

There have been no updates to the game since I made that video. We will find out Sep 10 if it's still possible to do in 1.0

[@LexiQnTech]

The scale of the game is BRUTAL and its so sad that the devs just trying to slow us down ... the give us stupid small blueprint desihner why you cant just paint on the ground a square and what is in the square count as a blueprint ? why do you need the extra building from it ... also the mooders xxl blueprint designers are great ... I hope this game will get more love soon coz its strat to be dying for me there isnt end game and some content is missing for me there ... the modding comunity is great and thats keeping in alive ... I hope we will soon se some end game stuff and usage for the S.A.M. ore exetra ... its 10 years in development its about time

[@Kinstruction]

Well, 1.0 will come. I've played a lot of games and I love Coffee Stain. I've never played a game that had as good of a company behind it in terms of communication and just love for the game. I know its a slow process, but since there's no endgame, thats why I'm making huge ass buildings lol. In terms of size of blueprint designers, I do get their position. They don't want people doing too much with them. I wish you could have a bigger blueprint if you weren't using machines or something. Well, after this video...we kinda do right? lol

[@brodriguez11000]

@@Kinstruction BD needs to be big enough to handle the biggest machine in the game which is the nuclear plant. Just the manufacturer takes a lot of the space.

[@Kinstruction]

Yea, honestly I think the size of the designer is fine, for most things. I wish we could make it bigger for non-machines, or maybe change its shape but have the same volume, so I could do long and skinny BPs.

[@FxTR22]

it got fixed in 1.0 😞

[@Kinstruction]

I heard it didn't, but I dont know for sure myself.

[@FxTR22]

@@Kinstruction placed 2 foundations with a gap. Made a new bp, cleared. Placed the new bp sticking out of the bp designer. It seemed like it did not recognise the newly placed bp as part of the bp designers entities. You could not delete whole bp as one anymore? Or is that a setting which needs to be turned on? It seems it breaks at exactly this point

[@Kinstruction]

I'll check soon.

[@rremnar]

I dislike the idea of having to use exploits to build things you want. The devs are stuck in their own way of doing things and refuse to listen to us. Every once in a while they'll toss us a bone. Therefore, using mods is justified.

[@Kinstruction]

I think using mods are justified of course, and they've said mods are ok, even though they aren't officially supported. For me, I don't see this as an exploit per se. I see it as a way to use the tools they gave us in a creative way. Like in another game maybe using a specific weapon and skill combo that wasn't intended, but turns out to be very good. In any case, I love putting this stuff out in the wild and seeing how people smarter than me use these tools. 😁

[@Grim_Reaper053]

The devs already said it would be way to complicated to implement curved objects bc they would have to redo the entire building system so it’s understandable on why they wouldn’t want to you are the one spending hours code bc it would take for ever

[@Kinstruction]

Right. I agree. I think he was mostly talking about building a larger blueprint. Which of course, we do have in 1.0 now. So they WERE listening to us. :)

[@protator]

I'd already seen Kac's video and it's cool'n all, but to be honest, now that it can be done in vanilla, it just gives me an excuse to use the mod. Now the mod is just a QoL feature.

[@Kinstruction]

Well, I'm sure it isn't intended to be done in vanilla lol, so it probably wont be forever. But yea, thats the best part about this game, the customization you can do with mods.

[@konowl959]

Which mod?

[@Kinstruction]

Not sure myself.

[@protator]

@@Kinstruction Well, there's a large number of mods that are helpful when you're building round/curvy structures, but "the" mod would be 'perfect circles' I think it's called. Does what you did manually in this vid with just two clicks.

[@Kinstruction]

That's good to know. I'm pretty happy with trying to see how far I can push vanilla building, at least for now. 😁

[@ppeez]

Im not buying your blueprints, lmao. Pity to anyone who does. Look at yakez, doing amazing factories and sharing all of it. Its your right now to, but it doesnt make your channel any better🤣 you didnt even invent the technique. Yakez spends hundreds of hours on some blueprints and still shares them immediately

[@Kinstruction]

All my blueprints are free on my discord. No one ever bought them so you don't have to pity anyone lol. Thanks for the comment though!