Perfect Dado Every Time

[@GRINwood]

All free plans I ever made here: drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing GRINwood shop: www.etsy.com/shop/GRINwood Support GRINwood: PayPal: [e-mail]

[@allanfischer9417]

I have watched many, many instructional videos over the years. This is the first and only one I have EVER seen that does not have audio and does not NEED audio. Usually I don't bother with the ones that don't have audio as they are, overall, worthless. This was very nicely and professionally done - Thank You!!

[@MrLelo337]

MUY buena calidad, el texto imagenes. kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

[@CreativeIdeasMaker]

It is admirable that you were able to recycle old wood and make such creative and beautiful products.

[@stormman8393]

I have come to the conclusion after watching several of your videos that you sir, are a genius.

[@elbananas5090]

Один из самый Афигенных Рабочих столов!!!

[@coppulor6500]

seeing you fit the pieces into the Dados was satisfying : )

[@robertsheward9336]

I think you made this video just to show off your workbench, well I was impressed!

[@sergeyfedorow3838]

Спец!!!Спасибо!Приятно смотреть как работает Человек!😃

[@amdomag]

What a nice workbench. Keep on posting videos..

[@jackjones7615]

One of the best jigs I've seen in a long time, well done you. Robbie from Huyton Liverpool UK

[@fergusdangerfield156]

Hi grinwood, fantastic video! Just discovered you and am really impressed, absolute precision, wonderful to watch. Thank you for posting x.

[@jimgraham4673]

What a cool approach to an age old question and solution. Perfect!

[@СтаниславСорокин-п4ч]

Здорово! Немного доработать, изменить и можно замки и петли врезать! Спасибо большое за идею!!!

[@zerstorerreich2987]

Отличная идея, надо обязательно сделать и наслаждаться ровными пазами.

[@ИванИльин-й8ъ]

Чет я не врубился, как ограничивается ход фрезера в бока. Можете пояснить?

[@zerstorerreich2987]

@@ИванИльин-й8ъ копировальная втулка, устанавливается в платформу фрезера и повторяет контуры, по которым фреза идёт.

[@ИванИльин-й8ъ]

@@zerstorerreich2987 Спасибо, не знал о таких.

[@Paolo27688]

Perfetto, fantastico, un lavoro molto pulito

[@masjabrikdiy8422]

hello friends greetings healthy and successful always. thank you for sharing knowledge and always faithfully watching your latest stuff I like your ideas👍👍

[@GRINwood]

Thanks

[@SergeN3-l5d]

Приятно видеть как работает мастер!!! 😊

[@ng1392]

Точный паз - это классно) Мне верстак зашёл))

[@mattedwards4533]

Smart little jig!

[@toonybrain]

Once the jig is made, what a timesaver! Brilliant! 👍🏼

[@Sergei_Brin]

Спасибо. Все гениальное просто )) но не всем очевидно , я запомнил

[@АлександрРостиславов-э3г]

Всё гениальное просто. Спасибо!

[@ЮрийКубалов]

Всё гениальное просто!👍

[@raulsoto2088]

Wauuuu.. me encantan tus videos, no me los pierdo, es un placer ver cómo trabajas… gracias por compartir tus ideas, cuando hiciste tu mesón,, increíble, un abrazo desde Chile 🇨🇱👍

[@misspginbc9947]

Nice work bench. Love the centre stop

[@laurielyon7740]

Superbly done..

[@ronnyrice697]

Now that is slick.😊

[@СергейВасильев-б5р]

Приятно смотреть на работу профессионалов.

[@nail6199]

Всё гениальное просто 🙂. Спасибо

[@marcosaslan1802]

Gracias super idea , yo la voy hacer

[@jbb5470]

Great video! I had to subscribe after watching this one! Looking forward to seeing your other videos. All the best

[@Dmitry_Kon]

Прекрасная идея!

[@mhamedlaidioui7582]

Merci beaucoup pour cette vidéo mon ami 👍🙏👍

[@micklatham3425]

That's really cool and clever. I got a shit load of laminate flooring left over from jobs.im gonna make myself one of them.thanks for the insperation. 👍

[@michaelmcclain5091]

Many years ago oh made a similar jig to cut the recess for guitar end graph. It is still going strong.

[@dinoLomedico]

A good video is of 10000 words

[@CBorghetti]

Congratulations!

[@maxprapr3333]

Браво! Удобная штука.Спасибо!

[@dan__________________]

If you put one of the edges of the jig up against the board receiving the dado you can also square the dado to the board.

[@longvu7435]

❤😂Thank you so much

[@ВладимирТюрин-з6е]

Замечательное решение!

[@norbertgallice7769]

Excellente vidéo, bravo 👏👏👍👍❤❤ Et surtout très beau résultat.....Amitiés de France

[@ПётрРакшенко]

Отличная приспособа!!! Спасибо!

[@youtukang]

Thnks friend

[@СергейЖолобов-ю8ю]

скажите, зачем нужна тонкая выступающая прокладка? тут она используется с копировальной втулкой кажется, но ведь можно и без нее. не понимаю смысла.

[@youtukang]

@@СергейЖолобов-ю8ю hii sir 🤝🤝

[@chrisstearns10]

Perfect 👍👍👍👍👍

[@HorseshoerCL]

Great idea!

[@user-32810]

Что это за профиль? Как называется, размеры и где купить? Спасибо.

[@danafosburgh2775]

Maybe some star knobs instead of the screws? Nice clean build. Thanks & good luck!!

[@Tchefter]

Great Job! and thanks for showing this cool stuff

[@АндрійОчеретяний-ф7т]

Все супер,як завжди. Все цікаво, і дивитися приятно .Дякую. Скажіть,а під заказ робите щось ?

[@latelierdejp]

🤩 Génial, merci pour ce tuto

[@yassergohiny4691]

Great job

[@Ayrat.M]

Нет слов!!! Превосходно !!!

[@youtukang]

Fantastic 👍

[@ALEKSANDR.562]

Очень полезно Спасибо огромное. 👍👍👍👍

[@Teoretikfish]

Хорошая идея! Главное, копировальные втулки не перепутать!

[@GRINwood]

Или фрезу )) Спасибо

[@ДмитрийОвчинников-х2щ]

@@GRINwood ну ввести маркировку размера фрезы и втулки на поверхность шаблона, добавив капсом "ВНИМАНИЕ!"

[@GooglyEyedSkull]

That is excellent! The only thing I might do differently is use Allen head bolts rather than pozie'.

[@usmustdie4peace405]

Thanks for the great simple construction!

[@youtukang]

Yes sir thnks too 😊🙏

[@samirsantoudji3176]

Good good good and good job

[@MrRules100]

Sure would like to see you get a better push stick to control the wood on your table saw! Looks like a great shop!

[@fashionwoodwork4623]

Great jop 🤝💐👑

[@Андрей-й8ъ4и]

Как всегда всё просто и круто!🤝

[@АлексейБлохин-г5ю]

Гениально 👏👍

[@thatDIYlife]

Very cool

[@kenluning909]

Nice build video. Great tip.

[@LUSEJA]

clever thanks!

[@justinkemeter]

I love it, just don’t know how you ensure it’s square to the board your dadoing

[@ElCidPhysics90]

Couldn’t you mark the one edge of the desired dado then line up the edge of the jig with that?

[@joshuataylor1035]

That’s why He has the 2 boards with t track. Those will ensure the dado will be 90 degrees to the boards…

[@dennisdickson8058]

He lined it up to his layout line, which was drawn using a square.

[@petec6690]

@ 6:17 - no room for glue on the side joints? Try a strip or two of tape when sizing the jig.

[@MCsCreations]

Fantastic work, dude! Amazing jig!!! 😃 Stay safe there with your family! 🖖😊

[@youtukang]

Yes sir

[@gomaasalm2236]

عمل رائع سلمت يداك

[@VladimirLavrinenko]

хорошо сделал

[@ИванГусь-м9м]

Спасибо за детальную озвучку

[@JeanRobertStrele]

Great jig. What I didn't get is what type of router bit you are using to prevent eating away your jig... Cheers

[@greglevandoski2983]

He added a guide bushing for this. Look here: kzbin.info/www/bejne/jXPcdHZ_aMqdoas

[@евгенийматвеенко-ф2к]

просто и красиво. Главное точно. О.К.

[@chrislane5677]

Router dado jig. Perfect dado implies the dado is a perfect fit.

[@sanychsan5702]

Спасибо большое!!!

[@СергейРогозин-ф1н]

Спасибо, берём на вооружение!

[@7Borchik]

Great job!!!

[@katharinelong5472]

Very nice. Quick question: how do you avoid tear out when reaching the sides?

[@joeskintone9752]

obviously use new premium router bit every time

[@shagovdima]

Super!

[@frankcornfield5915]

Do you use the same size of guide bush for all dados?

[@johnnyalarcon2868]

Gracias..

[@bahaaaldeen6744]

Nice idea

[@WIReeder12]

Nice jig, are you squaring it to the piece by the line you added with the square? John

[@danielb7311]

Parfaitement parfait !

[@Richard-wk9le]

I like your design because it does not use a top bearing but uses the collar on the base plate instead = 1 less wear surface to allow for, because bearings wear out.

[@youtukang]

Top

[@andreachinaglia5804]

in my experience usually the bearing is not the first part of the bit that wears out if properly maintained, it is the part that actually does the cut that wears out. That told it is true that a straight bit is cheaper then a pattern maker bit with top bearing so depending on how much housed joints you do the time and money spent to build this jig can be worth. I personally prefer to use the bit with the top bearing, I like jigs and fixtures, but they take space in my little and crowded workshop, so I prefer to build jigs that allow me to do something other way impossible and this IMHO is not the case given that a good quality and properly maintained pattern maker bit with top bearing can carve several miles of housed joint.

[@Alex_Erickson]

Excelente! Muito bom!

[@АндрейПетров-д4р]

Вместо гаек болты , а вместо винтов барашки с широкими шайбами. Так , и от руки можно затягивать , и износ верхней части будет не такой сильный.

[@GRINwood]

Фрезеру мешать будут

[@Habibulla.M]

Nice work

[@michaln7012]

Very interseting build, thanks for sharting! I wonder what purpose leaving this few milimiters thin layer of material on the bottom of the jig serves? Isn't it going to be trimmed by a router bit at some point, or is it specific to the spacing of particular router?

[@JW77]

Look at 3:10 he has a router guide bushing installed.

[@AdamFahn]

That trim is to allow the jig sides to be held open wider than the piece and will be the same as the offset required for the chosen bit/guide combination. If it wasn't there, the gap on the jig would be less and then by the time the guide is put in the gap the cut will be even narrower.

[@freeflyer6170]

This is an example of the weak point of this video. I do think this is a great video and brilliant jig but the lack of verbal que’s and a little bit more instructions can lead to questions for those less experienced. The offset at the bottom is to accommodate for the thickness of the router plate insert guide. If you look more closely, when he sets his stock in the jig and closes the jig, it’s the bottom piece of the jig that is tight against his stock, not the upper part. With that being said, a really well done video. Love your workbench.

[@borkokovacevic365]

@@freeflyer6170 thank you for clear explanation

[@Naz_Vibes]

I wondered the same thing, wouldn't it have been just as easy to not have the extra step of allowing for this by simply using a inverted flush trim bit?

[@СергейЛындин-л4д]

Использовали на фрезере копировальную втулку?

[@GRINwood]

Да

[@ВладимирКонинин]

Дружище,у тебя после ламината диск не садится?

[@alexeyb91]

О том же подумал, когда смотрел.

[@GRINwood]

Садится, но для распиловки ламината я использую старый отживший свое диск и пилю им только ламинат. Не точу его уже давно, с ламинатом справляется

[@WoodworkJourney]

Nice work!

[@СергейЛындин-л4д]

Спасибо!

[@WaelMuhammadMahmoud]

Thank you for the nice jig and the beautiful video, you have a very nice workshop too, but wouldn't it be easier to use a trim router bit?

[@lorera1713]

Amazing jig! Pls only one question...did u use for both panels the collar? Thanks from Italy

[@davidmcnaughty4889]

Yes he did

[@CsernyikTibor]

Clever

[@DestroManiak]

What is the name for those aluminium rails?

[@jayspencer498]

T-track

[@raufhuseynov5769]

CNC отдыхает ))))

[@ilyapetr0v]

Хороший процесс изготовления, но зачем ДВП?

[@СергейИванов-б4г3д]

Красиво