Perfect Prep Machine - Set Up & Cleaning Cycle, Demo & Review. Tommee Tippee Closure to Nature.

[@blaze1418]

This is the best video I just brought this machine and it didn't really explain anything found your video and set it all up perfectly cheers mate very helpful!

[@POUSEaroundtheHOUSE]

Thanks for the feedback and good luck with your new born!

[@raripadrino696]

Hello, im a new dad & needed a bit of guidance on how to set it up, by far this is the most well explained video I could find! I can now make my son his bottles in a few minutes! Thanks buddy😊

[@POUSEaroundtheHOUSE]

Hi Rari, glad you found this useful. I also have a video on how to do a filter change so hopefully that will help when the time comes. Best of luck with the new member of the family, hope it goes well. Thanks for watching!

[@raripadrino696]

I'll give it a look! Keep up the dad videos, helping a lot of new or young dads! And thank you!

[@Philfoden8873]

You man are a legend from 1 dad to another

[@POUSEaroundtheHOUSE]

Glad to help, enjoy parenting!!

[@harryjohnson7526]

You just saved me from a screaming newborn lol. Thanks for the video pal, really appreciate it, quality

[@POUSEaroundtheHOUSE]

No problem. Best of luck with the new arrival!

[@gamervslife3083]

Mate this video saved me. Many thanks

[@POUSEaroundtheHOUSE]

No problem 👍

[@juem]

Thanks so much for this video...its been a great help ! 👍

[@POUSEaroundtheHOUSE]

No problem.

[@lauramclean90]

Come back to this video every time I change the filter, brilliant video x

[@adambrowne6282]

Thanks mate- great demo

[@POUSEaroundtheHOUSE]

No problem 👍

[@TuzzaHD]

Just done this following the video which proved very helpful. Found the temperature of the bottle to be a bit colder than I expected, anyone else found this?

[@joshgell]

Hi, my prep machine water empty light is still on even though it is over the line. Not sure if I messed up as the filter was in during the hot water cleaning process. Any advice you can give?

[@zeroxx80]

I did the hot water cleaning cycle but after I put in the filter and cold water for the next part, the power button did not work - did not turn red or dispense hot water - all it did was beep when pressed. Not sure what I did wrong.

[@NicoleSmith-ey6wf]

best review on this machine i have viewed

[@POUSEaroundtheHOUSE]

Hi Nicole, thanks for the great feedback, glad you found my video useful. I have a video for the filter change coming soon so stay tuned. Thanks for watching.

[@POUSEaroundtheHOUSE]

Forget to say, links to my other baby product reviews and demos are below if you're interested. Tommee Tippee Microwave Steam Steriliser - kzbin.info/www/bejne/hIm5Y3esqa6GnNk Tommee Tippee Electric Steam Steriliser - kzbin.info/www/bejne/mXTRZKueiNqsnLM Tiny Love 3 in 1 Rocker Napper - kzbin.info/www/bejne/gKmpmXhvjrdric0 Fisher Price Baby to Toddler Rocker - kzbin.info/www/bejne/Z6KmlmB8dqyebsk Hope that helps!

[@englentinaharka4527]

does any body knows why my hot light is on .and how can i take of because i cant prepare the milk if that light is on

[@seancbutler]

Legend

[@POUSEaroundtheHOUSE]

Gad you liked it.

[@seancbutler]

Thank you 🙂

[@LDY98]

I've followed step by step up until pressing the main button to run a smaller 'feed' cycle and it's not illuminating or running water through but my temperature light is on, any ideas!

[@POUSEaroundtheHOUSE]

I might be wrong but the temperature light might be on because of the hot weather at the moment. If the water is above 25 degrees it won't dispense water. My temperature light was flickering the other day so hot weather might be causing thermostat to play up or water might be warmer to begin with. Sorry if that's no help. Best of luck!

[@prestigious5s23]

Bought this yesterday and when I submerged the filter in a bowl, the bowl got covered in black dust that came off the filter. The bottles themselves when made had dust particles floating around. Returned the unit and upgraded to the newer model and guess what, same thing, loads of dust coming off the filter. Have you had the same issue? I don't understand how two machines can have the same problem 😒

[@POUSEaroundtheHOUSE]

I didn't, but I'm sure after the first use the dust will go. It's just the charcoal in the filter. Let me know how you got on. Best of luck.

[@imogenclancy9479]

Thank you

[@POUSEaroundtheHOUSE]

No problem!

[@carolineadams4225]

I can’t even get the filter to release any bubbles when I put it in water and now I’ve put it in the machine it won’t filter the water .. ?

[@POUSEaroundtheHOUSE]

You've probably sorted by now but the water takes a while to pass through the filter which is perfectly normal. Best of luck!

[@AnaMaria-qt4hq]

Water from tap is ok? For milk

[@POUSEaroundtheHOUSE]

Yes. It warms it up for you.

[@adamwade7778]

I'm doing all of it but when I click the filter reset button on the side of the prep machine but it's just repeating its self

[@POUSEaroundtheHOUSE]

Not sure what to suggest sorry. If you follow the vid and go through the cycles you should be fine. I also have another video on changing the filter - kzbin.info/www/bejne/nam1lJZ-aceLY5o

[@liamcurtis-moore9825]

My son only takes 2oz bottles how do i do it when machine only goes down to 4oz

[@darrenkhan6041]

@Hotpointkid2008 😂 I do t think she cares what colour u got lmao

[@tryingtocatchastar]

Erm half it and pour the rest away?

[@traceyparker4325]

Does the filter have to be full of water when you put the filter in

[@traceyparker4325]

When you first clean it

[@davross23]

Give it half? 🤔

[@vickyberry2446]

I’ve just set mine up and when I put filter in and pressed the power button at the top and then went to press it again and it went red again. Had to press it for a third time and then it went green. So not sure I’ve done it properly now. 🤔

[@vickyberry2446]

What I meant to say was it went red twice and delivered two hot shots and then went green when pressing it for the third time. Shall I run that process again just incase??

[@vickyberry2446]

Also the thermostat light came on after this process. I think I’m just gonna do it again just incase I’m so paranoid 😂

[@POUSEaroundtheHOUSE]

Should just do the boiling water with red light, then once you add the formula the green light comes on with the cooler water. Best of luck!

[@annaliz4563]

hot or cold water should we use for fill up the water fillter on the vid 2:26

[@POUSEaroundtheHOUSE]

Hi there, just cold water for the filter. It just helps to saturate the filter so there is no air left in it. Thanks for watching!

[@POUSEaroundtheHOUSE]

Hi there, just cold water for the filter. It just helps to saturate the filter so there is no air left in it. Thanks for watching!

[@Mamabear22.]

Can I ask when using the boiled water I broke my old one for the water being fresh from the kettle so do you wait for it to cool down from boiling before using?

[@arron7]

Do u keep in the filter at all times when making feeds

[@CHUKDEPHATTE]

Yes you do.. the change filter light will come up when its time to change your filter.

[@POUSEaroundtheHOUSE]

Thanks for the reply xeeshan, I'm a bit late to the party on this reply but yes leave filter in. I've done a video on how to change filter if that helps. Best of luck!

[@danieldefoe7590]

Probably a silly question but is the cold water not sterilised?!

[@bunnykiller83]

The filter takes out all the bacteria from the water

[@POUSEaroundtheHOUSE]

No. Filtration and the boiling spray of boiling water help to sterilise the milk and water. Hope that helps!

[@ioanahelw5905]

The empty light did not go off. What should I do? So annoying

[@POUSEaroundtheHOUSE]

It will once the water has passed through the filter. Once it has add some more water. If the light is still on after that then it's broken! Thanks for watching.

[@rippalshaikh5807]

What is the golden chip inside the water filter tank mine came off what shall I do please help🫣

[@POUSEaroundtheHOUSE]

A sensor I think. You need to either fit it back or if it's broken then you may need a new machine. Best of luck with it.

[@hannahjones4747]

How soon before the baby is born should we set it up?? Stupid question i know

[@POUSEaroundtheHOUSE]

Not too soon as you don't want the water going stagnant. I would say set up once baby has arrived. I guess it also depends whether you breast feed from day one or go straight to bottle. Either way you'll have time to set it up while the baby sleeps......not! They never sleep. Best of luck with your new arrival.

[@hannahjones4747]

@@POUSEaroundtheHOUSE iv premiered the filter and did the hot water and iv now gone to fill it woth cold water but the empty light is still lit up 😩

[@neiluk2006]

Ty for this. Helpful... the instructions included were rubbish. Had a page missing.

[@judyk6779]

Not a silly question at all, my baby is due in 8 days & was wondering the same. I will leave until I needthe machine as I would like to try to breastfeed but if I cannot it nice to know that I will be able to make formula feeds 👍

[@hannahkelsi6219]

Why is my cold water taking forever to go through the filter ???

[@POUSEaroundtheHOUSE]

It's normal. That's the filter doing it's job. But as long as you keep it topped up after that, there'll always be available water. Be patient!

[@juem]

Haha yep, That's what I thought ..but it does say on the video..it takes a few minutes ..😊

[@carolh6711]

Does anybody no why my empty water light wont of gone of when i have filled it

[@henrykzajac4129]

Some problem with sensor or PBC comunication, etc. Disconnect from the power and connect it back. If doesn't work, try to do cleaning program etc. Remove water, container, Clean it up, fill it up etc. If still you have the same problem you need some guy, who knows electronics to fix it or run to service shop.

[@ToyaRoa1]

Is this when your doing the cleaning cycle? If so have you taken the filter out?

[@POUSEaroundtheHOUSE]

It was probably water taking time to pa's through the filter. Sorry for late reply!

[@cruelbritannia4056]

Does the machine give any form of feedback after you reset it with the centre button?

[@POUSEaroundtheHOUSE]

Not sure, I did this video a while back and haven't used the machine for over a year so I'd have to check sorry. Thanks for watching.

[@roxannegrieves4835]

I’m using this for the first time and the water level light won’t go off it’s been sat on for the past hour ?

[@tomvgeddes]

Def taken the sticker off the top of the filter?

[@roxannegrieves4835]

Doesn’t the filter need to be put in after you’ve ran the clean cycle ?

[@ChattingWithAngela]

You should add the formula powder then the hot water shot from the machine. Lid on then shake the bottle. This process sterilises the unsterile powdered formula. Press the machine button again and this will add in cooler water which make the bottle temperature perfect for baby. No need to test the temperature on wrist

[@POUSEaroundtheHOUSE]

Either way works. Thanks for the comment.

[@henrykzajac4129]

What do you mean "sterilizes formula". It will kill all the essential elements in formula, that cannot be heated above 40Celsius. Some formulas, finally have notes you cannot do that.

[@kenzowong53]

Great video, unfortunately can’t stand the silly drumming in between

[@POUSEaroundtheHOUSE]

Sorry about that, seemed like a good idea at the time 😂. I have eliminated the sound effects on later videos!