PERFORMANCE MODS ON HIMALAYAN - NGK IGNITION CABLE

A simple straight forward mod for a CONSISTENT SPARK & CLEANER COMBUSTION . Performance ignition leads/wires from NGK .
product link-
amzn.to/3sFKn2I
amzn.to/3m3TCaD
www.bikenbiker.com/products/n...

[@editingcorp]

I have switched to E3 3.38 Spark plugs after using NGK on my Himalayan. The throttle response, fuel efficiency, and overall performance is much better now.

[@ernst565]

your videos are awesome! just bought a himalayan in the states. i love it

[@ONTWOWHEELSBEN]

Thanks for the kind words dear friend. 😊🙏

[@johnfew5145]

Great vid. Thank you for your time and trouble.

[@ONTWOWHEELSBEN]

Glad it helped 😊

[@gurpreetgagan7671]

Definitely going to try.

[@ONTWOWHEELSBEN]

👍👍👍

[@sivakumarkuppusamy5127]

Good one Ben, thanks..👍

[@ONTWOWHEELSBEN]

Remember to ask about the resistor cap model for your bike before you order 😊

[@Kemrer]

Thank you

[@leviyseye-view.]

👍👍👍

[@rahulsachu]

Which ngk iridium suits my gt 535, the usual ngk iridiums in Amazon has a different cap top

[@vijayam1]

Ben, good one. I've been postponing this wire mod for a while now. Quick questions please, are the leads a screw fit on both the coil and the cap? That part wasn't clear on the video. Basically I can unscrew the stock lead from the coil and cap and screw in the new lead?

[@ONTWOWHEELSBEN]

yes it is a direct swap with screw on ends.

[@TravellingNoomad]

did you modified anythig to connect the end to ignition coil or direct fit

[@prajwalrkoushik4080]

please make a video of how to change maping of the stock ecu

[@VKR1989]

What do you have to say about the new product powertronic has introduced as the fuelx pro. Well the name itself clears out that it has to do something with the fueling but a detailed video on both the fuelx and the power tonic would be really helpful. Like which product would be better for what kind of riders

[@ONTWOWHEELSBEN]

will make a comparison video soon.

[@kshitishkum]

I already have NGK spark plug cr7eix (company ngk recommendation ) on intercepter and using stock company cable do you suggest to change the wire ? If yes, can you send me link of those wire for intercepter ?

[@Freelancer1984]

Bro your Voice is too good Please try for voiceover artist or background voice artist

[@ONTWOWHEELSBEN]

Thanks for the kind words dear friend 🙏

[@kylasmohan1668]

Ben. Is it available for ktm duke?

[@alsoknownastj9703]

I have upgraded to NGK iridium a couple of months back the performance is really good... Considering I have a TB500 BS4 ( single spark plug model) which cable should I go for.. the Splitfire one or the NGK one?

[@ONTWOWHEELSBEN]

Split fire

[@shub.s]

Is This NGK kit of Himalayan Can be compatible with Honda Cb 350 ??

[@freespiritravi0001]

Thanks Ben for video. Any installation video on ignition.

[@ONTWOWHEELSBEN]

I haven’t changed the ignition coil yet . This is the factory one

[@freespiritravi0001]

@@ONTWOWHEELSBEN sorry i meant to say was the spark cable direct fit in ignition coil.

[@freespiritravi0001]

Also is it CR3 or CR6 model.

[@abhijithole2226]

Awesome! I have a question though, what do you do or suggest doing to ensure the exhaust pipe (end to end) looks neat and clean. It changes color/fades with time. I have tried to power coat it but it was burnt out / started falling apart in about 1000kms itself.

[@joegarrison8611]

I have used a high heat enamel used for barbecue pits. I took the heat shields off and then I used a green scrub pad and brake cleaner end to end on the pipes. I then used the high heat paint even on the muffler. Although it does not remain coal black - it does gray a bit at the exhaust port, it looks so much better than the original color of the exhaust.

[@johnfew5145]

Powder coating will just burn off. It is just plastic coating. You could try ceramic coating . Have a look at : kzbin.info/www/bejne/baurY3uBa5t-h9E I have asked him on a couple of occasions to do a follow up vid to give a long term report on the effectiveness of ceramic coating, but sadly nothing.

[@abhijithole2226]

@@johnfew5145 thank you brother, let me figure out how it goes.

[@freespiritravi0001]

Hey Abhijit.... The most cost effective way i go doing is using scrubber pad (dishwasher) and harpic and scrub it and wipe it.

[@abhijithole2226]

@@freespiritravi0001 Sounds good, I will try that too.

[@Motoccino]

hey Himi prof - one question: Will this NGK full kit, help in the first crank of the day. My 2020 esp, now in Dec winter, in the first crank of the day, when I am doing the first cold start of the day, turns off frequently. I have to constantly use the choke to bump it up to higher RPMs for the engine to properly warm up. Do you think this kit will address this?

[@ONTWOWHEELSBEN]

No it will not . The only way is it get a fuel enricher/ commander. There is a product called race dynamics fuelX . Pls research it .

[@anirex911]

Thanks for the vid dude. Is this worth doing on stock bike? I mean no powertronic or exhaust.

[@ONTWOWHEELSBEN]

no friend . doesn't help much. will create a hotter spark and even more hotter running engine.

[@anirex911]

@@ONTWOWHEELSBEN thanks for the quick reply. One request. Can you do a comparo between your bike and a stock one? And give you thoughts on the value of all your mods.

[@Motoccino]

@@ONTWOWHEELSBEN ah, this probably answers a question I asked a few seconds back.

[@kshitishkum]

What differences do you feel while changing the cable with stock??? Cause we can use iridium on stock cable

[@ONTWOWHEELSBEN]

read about ignition cables with lesser resistance. yes you can

[@cinematography6244]

Why the display blinked when you started you bike at 6:52 , what the cause … why it happens

[@scottm4559]

Without powertronic can we install ngk split fire ignition coil and iridium spark plug along with k and n filter

[@ONTWOWHEELSBEN]

its not a coil, its the wire that i have changed. yes you can change it if your vehicle has done over 10-15000 kilometers.

[@Manu.Kurian]

Hi Ben I am buying a new Himalayan somewhere in April 2021 should get delivery. So if I were to change to a NGK iridium spark plug and firing cable... Would it cause a break in warranty?

[@ONTWOWHEELSBEN]

no not required for a new ignition cable and a new coil and most importantly a lean Air Fuel mixture

[@MrAjay567]

Ben, could you please help me with, from where did you get the splitfire cable.

[@ONTWOWHEELSBEN]

amzn.to/3MCdTjj

[@rhnvijay]

Hi Ben, can this wire be used for a Yamaha Rd 350? And if yes would make a gunge impact overall?

[@ONTWOWHEELSBEN]

I am not sure about the ignition coils output on the RD .

[@MSB_01]

Did you bought insta go the latest small camera??

[@ONTWOWHEELSBEN]

No . This is gopro on a chesty

[@TheTangocharlie]

Hi ben , do you suggest ngk spark plug kit on hunter 350 ? The bike is roughly one year old with 5k on odo. Please reply.

[@ONTWOWHEELSBEN]

Yes pls

[@donaldnagel2229]

I can't seem to find the cable set in the US and bikeenbiker only sells to India. Help please!

[@sasquatchhillbilly]

eBay.

[@anbusivaram9245]

Hi Ben, I am steadily moding my torque monster classic 500. Mine is twin spark. Does this spark plug cap and wire suit mine ? I can't find any leads to buy. Only difference I can see in the spark plug is the tip clearance , mine being .9 mm. I would like to discuss more in detail, can you please dm me ??

[@ONTWOWHEELSBEN]

www.bikenbiker.com/products/ngk-high-performance-spark-plug-and-cable-kit-for-re-himalayan

[@prasaddrives]

Hey Ben looking for quick feedback as I am planning to do this mod. How is the performance of NGK CR8EIX spark plug as I guess you have done long distance travel on it. Thanks.

[@ONTWOWHEELSBEN]

Have used iridium plugs for 15 years now . They are the best value for money mod .

[@prasaddrives]

@@ONTWOWHEELSBEN Thank you for your quick reply. Currently I have about 2K+ miles on my bike and planning to do valve check when I hit 3k. Same time I will do these perf mods just like you mentioned in the video. Getting all the parts lined up now. Here in California things are opening up slowly so will get more chances taking the bike out. Will keep you posted. Stay safe and thanks once again.

[@himalayanblender7248]

If any fault in ignition coil that will cause of missing??

[@ONTWOWHEELSBEN]

yes.

[@soubarnokundu1002]

Sir , does it aid in acceleration of the vehicle and the top speed even a little bit ? Please let me know sir . I’m in dire need

[@ONTWOWHEELSBEN]

No .

[@TouringGodz]

Any solution for heating of bike .... i own 2021 Himalayan and 1k KM completed ... if there is any solution or tip so plz let me know .

[@ONTWOWHEELSBEN]

Change to semi synthetic oil .

[@yethuraj4873]

Bro I got an Honda SP125 BS6. I am a collage student and needs milage so I baught an NGK Iridium sparkplug from amazone but the problem was that it doesnt had any gap and I straight up went to an local mechanic to make specific gap but that man used an cuting blade and screwdriver and without asking me by the process he slightly bended the iridium electrode then I went to anotherworkshop and made specific gap and installed the sparkplug bike is running . Bro my concern is that should I change the sparkplug because its electrod is slightly bended. Bro I had amazone 10days replacement but I didnt replace it because I knew that I made a mistake and I am truthfull to everyone. Bro please reply .

[@ONTWOWHEELSBEN]

contact me on my instagram account (same name as youtube). share a picture of your sparkplug centre electrode

[@yethuraj4873]

Thanks bro

[@sandeepkapoor1909]

Can this be installed on 2020 BS6 Himalayan ?

[@ONTWOWHEELSBEN]

Yes of course

[@beingCuriousRider]

Any difference you see in NGK cable and Split fire?

[@ONTWOWHEELSBEN]

NGK makes for a bigger spark , splitfire slightly less and the stock factory cable even lesser

[@beingCuriousRider]

@@ONTWOWHEELSBEN so it will be worth spending on NGK or split fire will also do the job consistently?

[@ONTWOWHEELSBEN]

@@beingCuriousRider Splitfire will work just as good as NGK .

[@beingCuriousRider]

@@ONTWOWHEELSBEN where did you buy split fire from

[@enduranceriderkiran]

You don't start the ignition after installing it

[@ads9973]

I need this cable for my thunderbird 500x can you please send me Amazon link

[@ONTWOWHEELSBEN]

pls check the description of this video

[@harshbadlani1001]

Which cable is better CR3 or CR6?

[@ONTWOWHEELSBEN]

Choose CR3

[@harshbadlani1001]

@@ONTWOWHEELSBEN Thanks

[@abd1596]

This cable is on stock coil or you changed coil also?

[@ONTWOWHEELSBEN]

Stock coil

[@abd1596]

@@ONTWOWHEELSBEN can i use these cable on carburettor Ns200 bs4

[@ONTWOWHEELSBEN]

@@abd1596 not sure ( but most probably you should be able to )

[@abd1596]

@@ONTWOWHEELSBEN ok thank you for your response

[@NamiChobingMixedBlogYes]

How many spark plug does Himalayan have

[@ewetho]

1

[@Motorist_amal]

How much does it cost ben?

[@ONTWOWHEELSBEN]

2500

[@mrrouts3918]

My himalayan changed my charging coil two time..what the reason

[@ONTWOWHEELSBEN]

Bad rectifier. Low engine oil pressure / oil level .

[@jaigirkar7836]

Iridium is a better conductor than a copper

[@ONTWOWHEELSBEN]

yes it is .

[@ewetho]

No, what is does do is wear much less and focuses the spark more precisely allowing for lower arc over voltage. It also wears much less allowing for longer life. Best Iridium plugs have platinum plated grounds straps for the same reasons. One of the reasons for a standard copper core plug and standard wire is to ensure sufficient flash over voltage for a hot spark to ensure ignition.The lower voltage requirements from the better plug and low resistance cable will make up for it in current flow instead of voltage. In the end copper plugs with hood cables and coils make more power but they were out much faster… with marginal stuff the plug that makes it easier to flash over and the wire to carry the extra current in the end do perform a little better.

[@cinematography6244]

Why the display blinked when you started you bike at 6:52 , what the cause … why it happens