Perkins Injector Pump install Manitou M50 Forklift

[@johngately3903]

I would recommend getting the two timing pins that go in the cam gear and between the crank pulley. No “timing marks”on this engine.

[@RobKingRC]

I do pretty good when it comes to working on my trucks no matter what it is .Ive learned a lot from watching you over the past 10 yrs .. Thanks Jerry from Detroit...

[@TestDontguess]

Glad I have been able to help

[@danhambrick6331]

Nice job Jerry.That baby purred like a kitten.....

[@cosmosasare7742]

But you should allow as to see how set timing

[@bombardier3qtrlbpsi]

Buy yourself a beer good job. Saving the company money. Thanks for sharing

[@ritualrampage5426]

This is pretty cool to see. I have a couple 1983 Ford rangers with the Perkins diesel in them. This looks like a very more modernized version of the motor in those

[@patricktavares8382]

Hey Jerry, That lift pump is available at Caterpillar (p/n: 270-6992) and is more than likely the cause of the injection pump going out. It'd be a good idea to change it out. I also find that my customers (yes, I work for Cat) forget that there is a filter (p/n: 1R-1804) in that pump that needs to be changed out every 250 hours. I've found its a 4-6 hours job. Good video. Patrick in Oregon

[@TestDontguess]

The filter was changed out with a Napa brand filter.

[@joepatterson4702]

Good info on your video, I am going to have to do this job this week.

[@mariodesmo]

Nice work, as always!

[@GatheringSticks]

wow... you work in a pretty nice environment.

[@murphtahoe1]

That thing is bad-ass!

[@hubertrobinson8825]

Man that's a lot of work the older Perkins were much easier remove fuel and injector lines the little cover 5 bolts I think in the front 3bolts on the timing gear 3bolts on the pump outside and its off as long as you didn't try to turn the engine no worries on the front of the pump drive shaft is a slot that lines up with a dowel pin on the gear turn the pump until they lines up and replace everything no problem it will start

[@amir-khanengineer]

Good job

[@leeisenberg]

Thanks for sharing. What year model is this? May soon be working on a 1999 Hyster 80 Perkins fuel pump, & 2000 Hyster 100 Perkins starter. Do you have any video/s or link/s handy for those? Thanks again. Take care from TN.

[@antonjonsson6902]

What manufacturing year and how many hours on the machine ? Good work.

[@timd5597]

We got the pump rebuilt but still will not start any suggestions?

[@DavidGarcia-rb8zp]

How did you prime this system?

[@oscarcardenas1167]

JERRY TKS HOW TO LOCK A PERKINS FUEL PUMP ALREADY SAW VIDEO HOW TO REPLACE BUTYOU MENTION REMEMBER TO UNLOCK PUMP APRRECIATE YOUR HELP

[@MoneyMarcMes]

Wow man you got a good job. That's awesome...

[@jgaming8717]

What is that in the bottom of the pump with one Electric wire ?

[@TestDontguess]

Fuel shut off

[@jgaming8717]

@@TestDontguess l have a manitou m1235s turbo at work , l find out that fuel shut of wire was disconect and l cant find were it will fit . Should it go to one of the relays on the side of motor ?

[@johnwarwick4105]

If this is the fuel solenoid what is the solenoid on the top with two wires? I have several Perkins engines and non have the bottom solenoid. Only asking as working on one now with a diesel leak and wondering why there was two solenoids ?

[@michaelstjohn6086]

@@johnwarwick4105 Ever figure it out? Got one I am in the same boat

[@johnwarwick4105]

@@michaelstjohn6086 no injector pump was leaking for about a year, kept looking how big a job it was just to get pump out! Hydraulic pump failed so had to replace that and diesel leak stopped after pump change 🤷🏻‍♂️🤷🏻‍♂️work that one out ?

[@Mr.FlairWoo]

What would this job cost a guy on site not in the shop?

[@pete6102]

dam jerry your the man

[@leeisenberg]

WHY does the pump shaft have a key, but the gear has NO key??...

[@amir-khanengineer]

Vvv nice

[@Deleterios]

Thanks for the Video, i have to do the same work

[@ifitsnotbrokenfixit1193]

Perkins 🤮🤮🤮 That towmotor looks like it gets worked hard. Good job Jerry on the R&R on the fuel pump.