Permanent Magnet Motor Using Magnetic Cancellation

Free energy motor using magnetic cancellation. This is only a prototype of a free energy magnet motor for testing. The idea here is to have the interaction between the permanent magnets on the rotor and a single permanent magnet on the stator to provide rotation of the rotor for about 300° of the rotation and then at the right timing, to use a pulse from a battery through a coil with reverse polarity to momentarily cancel out the magnetism from the single permanent magnet on the stator (the magnetic lines of the permanent magnet will be compressed momentarily until the rotor passes the sticky point and then will be released to continue providing rotation of the rotor.) This free energy motor is using a magnetic V-Gate with an all north polarity configuration. The stator has a single very powerful neodymium permanent magnet. If the permanent magnet on the stator is reversed, the motor can run in attraction or repulsion mode, clockwise or counterclockwise depending on the polarity of the permanent magnet on the stator. This video was made to motivate people to keep testing these kind of free energy motors to see whether more energy can be pulled out of it then what it takes to pulsate the single electromagnet. The coil also provides a collapsing field energy that can be put back in the battery to keep the battery charged. Also, a small generator can be connected to the shaft of the rotor to generate electricity to keep the battery charged.
Website: mindoftesla.com

[@DanielsInventions]

Thomas Edison invented 2000 lightbulbs that didn't work until he got the number 2001 that did work. Everyone told him it was never going to work and he proved them wrong. Nikola Tesla believed that an electric motor could be built that could work on alternating current. Everyone told him it was never going to work, it took him 4 years from an idea/vision to an actual induction motor. Just because it hasn't been done or one hasn't seen it with their own eyes, it doesn't mean it doesn't exist. In one of Nikola Tesla's diaries, it says that he discovered free energy on point of break, he meant collapsing field energy. He built an electric car that he demonstrated to people and drove around without an apparent source of power like batteries. He built a variety of induction motors besides the one we use today. In one of his patents of a different kind of induction motor, he states that the efficiency of that motor is well over 100%. Nowadays, motors are only 80% efficient.

[@christophemalvasio5569]

nice work kid anyway even if you end someday to have enough torque the volume of the motor make it not usable even worst to much magnets used

[@pizzahutgaming8590]

@@iveco30.89 didn’t ask

[@lakshmayyakt7519]

M

[@mohammadwasilliterate8037]

What has that got to do with free energy dickhead, click baiting asshole.

[@tonymurphy2624]

There's an enormous difference between random people telling somebody in the past that something wasn't going to work based on their intuition and people who understand what's going on telling you that something violates the laws of thermodynamics. Dude, I know the guy who designed and built Blackbird, the wind-powered cart that goes faster than the wind that Veritasium had a bet about. Everybody told him that couldn't be done, but I took one look at the details and saw that it could, because I could see where the differential came from. I spotted the solution within 5 minutes of looking at it. The untapped energy differential was heat normally lost to dissipation that was more than the law of entropy required, and he tapped into it to drive a propeller. Where is your differential here? If you can show me where an untapped energy differential is in your system, I'll do you a write-up. I've looked hard at your device, and I can see no potential - if you'll pardon the pun - for generating energy, because there are no untapped differentials in there. FYI, anybody who says an engine operates over 100% efficiency is lying. Anybody who says an engine operates AT 100% efficiency is lying to you. These don't violate mere intuition, like the Blackbird does, they violate the fundamental operating principles of the universe. Go do some research on Carnot cycles, and Emmy Noether, and Ludwig Boltzmann, and Rudolph Clausius, just to rattle a few names off the top of my head. You do NOT have a free energy mean, because such devices are a fantasy.

[@freesoul9324]

Do not pay attention to those who are working only on breaking peoples down.. You have done a really good job, as always.

[@jaxonevax6135]

Even if this doesn't produce free energy. This is a fascinating motor build. And took some real ingenuity. Pretty cool

[@haroldkline4898]

It's a straight copy of the v-gate. It's a very nice copy, but it would be nice if we could get some input energy numbers.

[@omviuvenitlalumina]

apparently the noise could be a problem

[@joshmellon390]

It uses a 3d printed plastic flywheel. This is just stupid.

[@ShivCrow35847]

@@joshmellon390 any idea how inventing goes? Definitely not being a negative ass on the internet. It's trial and error and many versions increasing the value of materials used as more precision is needed. Use thinking before more useless shit comes out of your mouth.

[@anatomicallycorrectmuppets8180]

@@joshmellon390 don’t be so harsh. He is doing awesome for his age. Especially consider what the rest of his generation looks like this young man is doing awesome.

[@Kneelb4me1]

Attach it to a generator (you can make one with a few coils and magnets) and see if it keeps rotating, charge a battery pack from that generator and compare the amount stored when the battery runs out that is running the stator coil. Then you will know if there is a net gain - stored less battery initial charge. Great work.

[@MissionaryForMexico]

When you do not talk to explain, that speaks volumes to me!

[@adamguest103]

I dream about doing similar experiments with magnets and electromagnetism. You have some very nice projects (inventions)! Make sure you get patents on the good ones!

[@longhealthyjoyfullife]

Great job Daniel. I feel so happy for you and your parents. Keep up the good work. You are making your parents very proud.

[@frost1183]

I Like your channel name it’s true

[@Persanity]

Is this essentially a v-gate magnetic motor with an electromagnetic boost?

[@FreeEnergyNerd]

very nice build! using a commutator will use lots of current, a hall sensor or a reed switch would be more efficient..

[@etiennevantonder7438]

cant believe i only discovered this channel now. i have been wanting to experiment with magnets in combination of solar power to generate free electricity making sure the magnets stay charged for longevity and a battery to store energy from the solar to keep it going still. and use this to output as much as possible with a lifespan as long as possible. main goal is to experiment with outputs given in comparison and to accomplish as little friction as possible in the process. i have an idea of what i want to build already. now to blow my savings on some good fun magnets and failures :D cant wait! thank you for this. really put me in the mood to start finally!

[@EvilOverlord96]

Isn't solar power free already?

[@jaffasholva7738]

@@EvilOverlord96 Technically no. They are so expensive, most people cannot afford enough to run a household on it. The energy companies place them on our roofs here, but the energy is collected by them. You will get a small compensation for it. It is criminal. Personally i'm looking for a way to make them more effective. I don't really like solar panels because they cannot be recycled. We will have a mountain of chemical plastic in 50 years. All to save the planet of course.

[@heinzpg]

@@EvilOverlord96 "Free energy" in the context of this and similar videos means an energy output which can not be explained by physics. However, no device - including the device in this video - has ever shown such free energy in a credible way.

[@josegarcia2762]

theres electricity in the atmosphere. some motors use a large antenna that get this energy to make them spin

[@heinzpg]

@@josegarcia2762 Yes, there is electricity in the atmosphere. There is a surprisingly strong voltage gradient of about 100 Volts per meter. But there is no power behind this voltage, for power you also need amps. This voltage breaks down at once when a load is connected. Otherwise the perhaps 170 Volts between your head and your feet wouldn't be unnoticed. A large antenna will typically collect more power from radio waves than from atmospheric electricity. It has been calculated that harvesting atmospheric electricity on the _complete_ surface of earth would not deliver more energy than an average power station.

[@smacl61]

Thanks for demo of a "Free Energy" electric motor. Electric motors are cool.

[@retiredusarmy]

Daniel your ability to source the jigs to form your inventory is amazing. Can you show us how to collect the energy produced? So many questions, just want to say I enjoy your videos. Thank You for getting our minds working on free power. 👍

[@lucuspreston7292]

Dude... theres literally an output shaft running through the center axis... dont reinvent the wheel just use the damn thing!

[@micjam1986]

@@lucuspreston7292 you sound like such a douche!

[@lucuspreston7292]

@@micjam1986 thats true i douche my wife regularly.

[@Zeldafan1009]

This is absolutely brilliant.

[@johnM-Jr]

Daniel, is the gate the narrow part or the wide part? So all the magnets are N on the wheel and you use the opposite pole to drive it (until you come to the gate) ?

[@SteveOLive88]

I have wondered if this would work and you proved it for me. Thanks I shall have to build one now

[@cherilynnfisher5658]

Very interesting. Thank you!

[@everything1471]

Hmm, makes me wonder if you could store some of that energy you have spinning in a capacitor bank and then switch over to it to power the cancellation coil when it gets up to speed. That flywheel is storing quite a bit of energy, and you have quite a few magnets slinging around there to "steal" some to power up the capacitor bank. This is good stuff. Keep at it!!

[@orobinczaia5527]

Yes, see Bedini et al.

[@sheldonlawrie]

totally, trickle charge

[@s11-informationatyourservi44]

Yes actually, I put 6 maxwell super caps in serial, diodes, rectifier on the front of mine. It’s a valid design

[@melodypaz7247]

I enjoyed this video. I appreciate your efforts on our behalf. I am wondering if using a spiral cam might reduce friction and increase output.

[@TremayneDouglas]

My Dad would have built this! Good one bro 👏

[@amegatron07]

Some young enthusiast: 1) hm, cool generator! Pretty expensive, but if I invest in it now, it will give a lot of free energy! 2) assembles the generator 3) well, at least it's a cool toy)

[@MH-Tesla]

Wow. Channel is BLOWING UP! Happy for you!

[@DanielsInventions]

Yes! Thank you!

[@mickcarson8504]

This thing is about 20 years old, when KZbin came around from Google, around the time when these attempts at creating free electricity generators using magnets never got ahead because there couldnt be proven unless a hidden source of given energy, or batteries, was applied to the device that would eventually produce electricity. In other words, a generator driven by a petrol motor. Plenty of those around that genuinely produce electricity, including generators used in construction zones and in power station and dams. Now, after all these years, people still think that magnets can be used to rotate a 'rotor' and produce electricity at the same time. Wow! It never fails to amaze me at how many clickbaits are on KZbin who think we are stupid sheep who believe in anything shown on this sick social media. Does this mean, we are definitely that stupid, yes/no?

[@chrisherrera3363]

Nice work man. Awesome

[@christophernichols114]

It looks very pretty

[@tommyz7217]

Hello , I love this product and video! Can you provide a parts list to create this? I really would like to build one. Thank you!

[@100101]

Excellent work

[@modestonogueira8884]

Tudo é possível,... quando uma única vontade, se torna em várias ferramentas !....

[@gustavolorenzocabral5306]

Perfecto. Anula el campo magnético justo en el momento de mayor presión magnética. Funciona.Lo que no se es el consumo de corriente. Y si hay ganancia en potencia o perdidas debido al consumo eléctrico

[@ricky19651]

VERAMENTE FANTASTICO,CIAO DA ROMA

[@kuyawintvtech8931]

Great idea👍👍👍

[@ryanjamesloyd6733]

Ok, I get the idea, but I don't quite get How it's doing it. how are you diverting the flux of the drive magnet away from the wheel at the right spot? I know it can be done routing it through an armature, like those welding magnets you can turn "off", but I'm not wrapping my head around how this does that thing.

[@nsday1]

it seems to be the same idea as a magnet accelerator. It needs force to get started, but then can continue in a loop based on the magnetic force. I'm definitely not as smart as many other people, but there are magnetic accelerators in existence (monorail trains?), and even a lot of videos on KZbin of people making little 'toys' out of powerful magnets that move an object just based on the magnetic field. They all need that first form of power to start, but then the magnetic fields take over. To me, this seems to be the same idea, but in a loop. The inertia of the motion is able to push the start of the next 'loop'.

[@heinzpg]

Magnetic accelerators exist but you are wrong that they just need power to start. They need power all the time! Also this motor does, the wires you see are connected to a DC source. Which is not shown since the author claims that his motor produces free energy which isn't true at all. Magnets just serve as a tool to transfer electrical power into mechanical power, but they don't contribute to the output power. The whole output power stems from the electrical input and the efficiency of this motor is miserable.

[@MarioXP2008]

Amazing!!!

[@lavague7648]

Nice motor. Perpetual motion exist in nature. It is called renewable energy coming from sun air geothermy etc.

[@DanielsInventions]

We agree.

[@c_n_b]

Na, the sun will die eventually.

[@garysimon7765]

I like this. Thank you.

[@patrickwatkins7572]

making a flaw design work takes time, and sometimes longer than finding design with a future. choice is yours boys. - but im def still working on machines. - il post an update soon, got something to blow your socks off.

[@SamSon20]

Brilliant man ✌️

[@shannon6815]

Okay so the coil is producing an electric magnetic field? Which pushes the permanent magnets around making it spin? Is that what I'm seeing?

[@hhocharioteer]

Build a ring around with more stator magnets and coils. Switch them one by one to gain more torque.

[@procash1968]

@@KevinSmith-os5yz what if an electromagnet placed at appropriate positions and its polarities switched fast enough so that there is attraction and repulsion enabling the cylinder to rotate. The power to this electromagnet can be supplied from a part of the power generated by this machine

[@tonymurphy2624]

@@procash1968 No, Kevin is right. It isn't possible to get it to run itself, because it runs hard up against the laws of thermodynamics. It isn't even possible to achieve unity because of loss to entropy, let alone get more out than you put in, which would violate conservation.

[@procash1968]

@@KevinSmith-os5yz ok, thanks 👍

[@royhancock1817]

Are the electrical wires in the back ground coming from a receptacle and feeding this invention or are those wires feeding power to a load. It's not free energy if a receptacle is providing the power..

[@fredfloyd34]

Tesla jr....excellent...what can you run with that machine.??

[@1NEFFIBLE]

Feed wires back into device. Set on glass and give us every angle. Above AND below. No external power source. Then add just lightbulb socket for proof.

[@xuanthuyvannguyenthuy4781]

Hello rất hay tuyệt vời nhất chúc mừng bạn thành công Sáng tạo hay ok

[@Metaconta]

Buen trabajo,

[@johancahyadi6905]

Better construction for eliminating excess vibration + bigger flywheel might be needed to gain efficiency

[@rvlifestylelivin]

I do believe a very big system comprised of electromagnets and rare earth magnets combined will be the answer, maybe a long tube of alternating magnets and flywheels at the ends for energy storage and all the electro magnets will have to be timed correctly for the continued push on the hortizontal drum. maybe the entire inside of the cylinder drum is filled with south pole magnets and have a bar in the middle of south pole magnet so the cylinder drum will basically float then have a bigger cylinder around that one that will have the electro magents in or to keep rotational timing.

[@kambinggulingbangdoel]

Terimakasih pencerahan nya

[@digrannirctruck3771]

Vou continuar tentando tbm

[@christianjon8064]

I wonder if you could somehow integrate a piston so the main magnet that’s driving it moves in and out like how you were doing with your hand. If it was mechanically timed out maybe it could get that thing pushing with some torque. Maybe have the axle drive a piston which pushes the main magnet in and out to drive the motor.

[@christianjon8064]

@MikkelRS yeah there you go - a cam lobe with just the right balance. You just gotta borrow a bit of the energy to get it past the hump. Because there’s definitely some sort of energy force being produced by the reaction between the magnets. There’s a distinct pushing/pulling force. Even just a heavier flywheel might be beneficial to store that energy momentum

[@christianjon8064]

@MikkelRS yeah you just have to find a mechanism to break apart the two opposing forces and harness that energy without it canceling itself out. It never does repel against steel, only attract regardless of the positioning so maybe that’s where the secret lies. Have it so the pulling motion is pushing something up and then let gravity pull it back down to the magnet. Or have the magnet above pulling something up. Maybe a steel plate above pulling a wheel of magnets up.

[@kdkinen]

great work! do see Tesla's patent 336,961 on elimination of the commutator sparking by coil design.. which i believe is also the origin of the Tariel Kapanadze reverse winding method.

[@heinzpg]

Where do you see "great work" here? This is nothing else than a primitive e-motor with bad efficiency, and eliminating commutator sparking will not change this. No trace of free energy at all.

[@kdkinen]

​@heinzpg well you get something spinning first and then you can talk

[@heinzpg]

@@kdkinen I am an electrical engineer (MSc) and although motors were not my field of work I know a lot about electrical machines and I got several things "spinning" in other fields and also got patents for it. And I have a sound knowledge in physics. I invite you to demonstrate your competence by explaining why you rate the motor in this video as "great work". In what aspects is this motor superior to the motors we use every day? If you think of "free energy", what makes you think that this motor delivers free energy?

[@kdkinen]

@heinzpg look man, he's got skills, go hack on someone who deserves it.. like someone with no videos D-bag

[@thomashebert3308]

Do you have an build list ?

[@javasrevenge7121]

Great job.

[@soul2065]

You should replicate the design on the sides of this and the reverse in the center of it for a 6 to 1 power amplification

[@linoalberio2766]

Ciao Daniel, Sei molto bravo complimenti, Posso avere i link dei fornitori dello corrente per realizzarne una? Grazie mille Lino

[@milkywaymusic]

You should sell these for those of us too lazy to hunt for all the parts needed to build it.

[@stevenwilliams2601]

I would like to see what this could do with proper gear driving and clock springs. I do see several potential uses from this device. The one I would like to see is a much larger design then affixed to a gyroscope to stabilize multi-rotor single person aircraft.

[@ghostkid5714]

I'm wondering if I can get several of these patterns on a longer drive pipe to an alternator and produce electricity

[@clairrushin4531]

What rampage output does this device give? Or volts. Very interesting indeed😍

[@eliotorres5834]

DANIEL LOOK TURNS MAGNETIC REPULSION INTO ATTRACTION WITH A SIMPLE PIECE OF IRON BETWEEN THE SAME POLES. YOU CAN BUILD A SUPERPOWERFUL ENGINE WITH THAT.

[@thenatural1759]

Presumably the closer the magnets are to the copper coil, the more electricity is created. Is there a minimal distance electricity is created and a distance where electricity is maximized?

[@Links777]

So often I hear no such thing as free power; this isn’t free power but it does produce power it appears and would likely require minimal maintenance and a little bit of cost to give it its initial power up to be operating at the speed it needs to rotate for maximum effective power production. Idk if that made any sense to anyone what I said, I’m just a normal guy some college nothing special. I could be completely wrong on my assumptions but either way very fascinating video and concept I really liked the breakdown in materials so others can attempt it as well.

[@paulsthormes251]

Thanks for sharing 👍

[@DavidPirouet]

When you use magnets they have stored energy to put into the system the problem with magnets balance at some point they become stable in operation. It's the same problem that you have with shapes it took a very long time to find a shape that wouldn't stay balanced. Would you get useful energy out, though.

[@shilohlee4332]

If all you need to do to keep it moving is move the permanent magnet away at the beginning of the loop or V, would a kinetic (gears, etc.) approach work and not require additional electricity?

[@heinzpg]

The energy needed for moving the permanent magnet is equal to the energy of the rotation caused by this movement. Due to losses the rotor would not run with a kinetic approach. Matter of fact, it is the additional electricity which delivers the energy for the rotation. The magnets are just a tool to transform electrical energy in mechanical rotation, but they don't contribute to the energy. This is just a strange e-motor.

[@zaildarkuldeep8451]

Very nice good job.

[@Radovedn]

I think I figured out how to make perpetuum mobile out of this. I build my first V-gate magnet motor like 20 years ago.

[@vasileroberto1165]

BRAVO MESTERE SUCCES

[@brianbauer750]

Dang man I’m here in a Old style hardware store with over 75yrs of old stuff returns heaters, mixers, printers and Gobs of wires, insulators and old TV testing equipment Etc.. but I’m lacking the time & skills to attempt to make stuff like that!😂

[@troyhonaker3516]

I cannot vouch for workability, I’ve never built such a thing, but being that magnets have enduring attraction or repelling effect, I think this may be possible to configure. Folks, try it before you shoot it down.

[@QuinceDeMayo-jg5wb]

Es bonito y el vídeo está curado ahora produce electricidad?

[@uppermostleague9047]

Brilliant 🤩

[@anatomicallycorrectmuppets8180]

Hey great video. You should make some new videos of these generators and show some output. Even if it’s low it’s worth noting. I could see something like this (or something bigger) working very well to power an off grid tiny home setup.

[@heinzpg]

Unfortunately this design will never show any energy output. Even to keep it rotating without a load will need an input of energy.

[@netnomad47]

@@heinzpg it's called electro magnetic energy

[@heinzpg]

@@netnomad47 Permanent magnets only have magnetic energy. But this energy is not spent when they exercise forces, and this energy can't be tapped. Thus, with this device the only energy source is electrical energy from the battery. It is this energy which causes the rotation. All you see here is an unorthodox and not very efficient e-motor driven by a battery.

[@mirothedjplaylist]

You do all realize the implications this holds even in space, nitro cooling the magnets this could produce a directional flow of energy creating a wave that can be used to both power and direct a shuttle

[@tretyakovmax1]

Чтобы сделать такие магниты было затрачено больше энергии чем подобная тарантайка сможет выработать до полного их размагничивания))

[@viciriuctoader8406]

Ok felicitări

[@wanudesign1983]

If using a round stick, would it be good ? shell magnets short front long back

[@roynaidu2327]

Is this using the bedini ssg circuitry / wiring schematic?

[@oskarbud525]

You better not cancel my magnetism.

[@toaderviciriuc2249]

Ok felicitări ❤❤❤

[@joesargent481]

Impressive 😁

[@toordog1753]

Isf you use tru magnet cancelation, you can actually accomplish what you're trying. Think about a magnet in a tube and a coil around to control and cancel.

[@TheWorldBelow360]

Nice build. But will it move my Go Kart?

[@v1-vr-rotatev2-vy_vx31]

Yes we'll get some ball bearings on the shafts with no grease in them just dry with maybe some silicone oil,that would help. And ah yes the magnets that's the key. If only we can afford some Cobalt magnets

[@awaissaleembukhari844]

This technology May use Electric Cars for their existing batteries charging, and this will enhance the mileage of vehicle and hassal free from charging 🇵🇰 and this technology may also be used as an free electricity producer for Home appliances. I am really excited to listen more benefits out of this 🙂 hay launch it immediately 🤠

[@ppilje]

And plus, adding a shock absorbers-electric-generator (patented by French guy), which adds more electricity by up to 25 % using ingeniously designed system attached to the shock absorbers in the car, it will greatly improve car's ranges. Personally, I think that the free-energy machines will have more and more influence in our individually built self-sustainable motor transport in the future. Batteries will be trow away. NIB magnets as well as samarium-cobalt, will play key role on this matter

[@Gigachad-mc5qz]

Its fake

[@originalguckfoogle]

Let's just ignore the wires actually powering it. This is a gimmick, you can't make a perpetual energy for no cost, you think some guy on youtube knows more than the people who make nuclear power plants?

[@Mosquitoserge]

How many volts can this run if it was a bit bigger and had the right set up

[@elizeumedeiros8987]

Would you send a replica to Brazil to be used for high school classes?

[@ronaldofumiofurukawa8154]

Muito bom

[@YouStupidBunny]

I see a potential problem with your build. Recheck the geometry of your betrux hadrans. When they're perpendicular to the threaded judices, they can create turbulence and reduce power 50% about 20% of the time.

[@zaddy49]

Heresy! The perpendicularity of the betrux hadrons to the threaded judices is what negates the turbulencary! (in the tirtiary modial plane, of course).

[@diegoapto701]

Maior.mais potente eu imagino.

[@urajsingh9292]

Thanks

[@paulstearns93]

Quick observation/question, without any electrical components, coils, etc., why doesn't it continuously spin? Seems like it should provide free mechanical energy without converting to electricity, and then converting it back.

[@carrikartes1403]

Could this incorporated with a wind turbine to increase output and reduce resistance?

[@RonnieMcNutt666]

U need to use hot glue superglue etc to keep the device stable and not shaking, all the little parts as well

[@gefemaar1]

Quisiera saber cuánto voltaje produce y quisiera un poco más explicado lo de la bobina gracias

[@MrFelipeapl]

Yesterday I saw a commercial application from this idea from the infinity sav company, around 3K usd for a 5.5Kw generator; it has a few limitations: the magnets run for 25 years and require some time to reach maximum output, the generator doesn't work in motion (like a car) and takes like 2 minutes to turn on.

[@heinzpg]

Sorry, what you saw is a scam. InfinitySAV is a fraudulent company. They announce sales but they will never sell any machine, since they have no working machine. They only want to rip off gullible investors. This kind of fraud has become quite frequent. I know several companies following this scheme.

[@horrortv2776]

How much power does it generate and what’s the power rate conversion

[@williammielenz3752]

Nothing free here when considering the energy used to charge the magnets. How well does it work Into a load?

[@bradbrown2168]

Put a load on it. Short wave radio. Would show its real SHTF usage.

[@Foxengcnc]

Daniel I have a fully tooled CNC Machine shop. Lets build some of your inventions!

[@rexford9019]

Need a visual of what those wires are connected to…

[@electricjunta6490]

I believe this works!