Personalized resin keychain part 2

[@shalaurajones5191]

Amazing video!!!!! I'm trying it out now. So far I got the mold correctly lol. The vinyl is giving me a run for my money.

[@Tigeabee]

Hey. Don’t do it this way. Reverse weed. Put the entire thing down on the Matt the pull up what you don’t need. This way will give you a headache lol. Especially if you have the letter i to do

[@melissahamm4620]

Thank you for this video. I was curious as to how you did that when I stumbled upon your video. I experimented with the name on vinyl and basically did everything in this video except I left the vinyl on the paper (I don't own a silicone mat) and poured the resin over the name. Voila! It worked. Thank you once again.

[@KrislieDIY]

Good to hear that thankk you as well ☺️

[@anniechu2827]

I don’t have a silicone mat either. So Melissa, you just left it intact on the vinyl backing? There were no problems peeling it once it cured?? Thanks.

[@CatsBraidedCrowns]

These are really nice! Ordered one from your Etsy shop for my teenage daughter! Can’t wait! 💯💯😩🥊

[@KrislieDIY]

Thankyou soo much 🤗

[@carmengarcia9646]

Ohhh my I love that idea,wowwwww

[@sharonwilkins1821]

Thanks for sharing! Will definitely try it!

[@ruth-annestewart2200]

Thanks for sharing. These look amazing!

[@laviedunartisan7265]

I always hit the thumbs up before watching the video.......rocking the resin 😝😁

[@KrislieDIY]

Thanks😃🥰😍

[@monuette47]

Thanks for sharing what was setting on your Cricut when cutting the letters I have a hard time

[@TheJmtb75]

Freaking genius!!!🥰thanks for the videos!!

[@yohanams9145]

Amo tus videos🥰😘👏👏

[@MsPumpkin619]

This is so cute and unique.

[@KrislieDIY]

Thank you ☺️

[@kierrabrown486]

Hey!!!! New sub here. I love your videos and they have helped me out a lot. I just got a circuit maker for my bday about 2 weeks ago and I have been looking for creative ideas. This by far is one of the best. I hope you make a voice over video one day making these. Keep crafting 💗

[@melonyrosario8400]

Good idea... love it

[@antheasinspiringworld1163]

Nice job

[@tamikka09]

Great video tfs🥰

[@karenpaul4594]

super cute! what size should the letters be? sorry Not letters what is the over all size of what the names are? They all look the same size. cute cute cute.

[@Warriorlover69]

I'm in love with your craft 😍

[@KrislieDIY]

Thankyou 😊

[@theycallmechar3341]

This is super cute!! I’m going to try this!!

[@gritsnwavy3059]

Love it!!

[@taneiciahawkins7585]

What type of mat is that you put the vinyl letters on to epoxy them??

[@mimiechicx9979]

Woooow hun so beautiful i bet you the most professional in this game .... I love it ..whats the name of the machine

[@lquivers]

Hello I’m a new here and your work is outstanding and neat. Thanking you taking the time to video it’s very helpful

[@enoagyemang]

I love it!!!!!!!!

[@gabyparamo2799]

hello where do you buy your pompoms for keychains?

[@ynahjess6871]

Gandaaaa kaso wala pa akong budget😂🇵🇭maganda talaga sya pang business

[@ynahjess6871]

Ano po yang parang blue sheet na gamit nyo po?

[@KrislieDIY]

Silicone mat para mas madaling tanggalin resin pag dumikit, Oo madami na ngang nagbibusiness dito ng mga resin eh ,

[@hungerforimprovement5800]

The was amazing ❤️❤️❤️

[@charlottearthur2317]

Hey. Your work inspired me to start my business. Thank you for sharing. Do you know if they have bigger letter molds?

[@KrislieDIY]

I’m not to sure but I guess there is ,,, sometimes they sell it at Etsy

[@jasminbaker4885]

I want to start making the keychains can you tell me why do you put heat to it what does that do

[@KrislieDIY]

Take out the bubbles

[@NellieT9230]

Gorgeous!

[@ayanaharris5553]

How much pressure did you use on the needle in order for the name to just be peeled off like that? Every time I do it, I have to poke the letters out.

[@KrislieDIY]

I just set the machine into vinyl , and I’m using permanent vinyls maybe it depends on the vinyl also

[@MzzzTbaby]

I love it

[@dalilachavez6195]

The earring bail,, what glue do you used. ?

[@KrislieDIY]

You can also use e6000 but here I use the epoxy too

[@sharonedge-harley1566]

Thank you for making this video

[@cierra87]

I love it!! What font did you use?

[@KrislieDIY]

Mixed , but my favorite is the Friday

[@cierra87]

Krislie DIY thank you!

[@jocelynparedes2292]

Is there anyway you can do it w/o the cricut machine?

[@sakuracreations9151]

Freakin awesome

[@Tubrujita2007]

Donde puedo conseguir ese mismo molde

[@CurlySxvge]

If you dont have a silicone mat what else can you use?

[@trashleymessbrough9483]

The program you used for the fonts, does that come with your sticker printer

[@Beekaay675]

What program and machine are you using please reply

[@KrislieDIY]

I’m using the cricut explore air 😁sorry what do you mean by the program?

[@divinegraceagua9263]

They are beautiful, how much do you sell these keychains anyway?

[@shanieceg5794]

Hey! Lovely video! Where did you get the clip you used on the letter so u could attach the keychain?

[@KrislieDIY]

Oh the tweezers ‘at amazon there’s also at Walmart

[@shanieceg5794]

Krislie DIY thanks! That’s what the hook you put at the top of the K is called?

[@KrislieDIY]

Oh that’s a earring bail , so no need to drill it just glue it 👍🏽

[@shanieceg5794]

Krislie DIY ooohhhh that’s what they are called! Thank youuuu very much!

[@cecyylovesjesus3093]

You make them best. Where do you get the hardware?

[@KrislieDIY]

Are you talking about the cricut machine?

[@cecyylovesjesus3093]

Krislie DIY the screw pins. Is it a screw or clamp?

[@KrislieDIY]

It’s a earring bail ,

[@tawanamichelle]

Please what glitter do you use

[@KrislieDIY]

Glitzy glitter And glitter guy ☺️

[@marcia6506]

What’s the measurements for the letters?

[@MsPumpkin619]

You can get the mold on amazon

[@marcia6506]

Yes I have the molds, I was getting at the names

[@KrislieDIY]

For the names I’m reaching the 1.5 to 1.6 coz once it’s @ 2 it’s gonna be big ,,you can see the size by the video

[@MsPumpkin619]

Hi What is the size of the name in design space?

[@haineswortam]

You are the bomb💣💣 and I love your work. I have a question regarding the yellow lines when you were lining up the letters. Is that a special feature or tool you use after you ungroup them?

[@KrislieDIY]

Thankyou ☺️,,,no,Once I ungrounp the letters and move the letters,, that shows up automatically ,,

[@marisoldominguez6414]

Have you used adhesive foil? I am trying to use that. I feel like its impossible to get it off without pulling the name apart

[@KrislieDIY]

I use a permanent vinyl

[@marisoldominguez6414]

@@KrislieDIY even for the video before this?

[@KrislieDIY]

Try do another layer of permanent vinyl ,,, and use transfer tape,,,

[@marisoldominguez6414]

@@KrislieDIY thank you! I figured it out. After changing the font. And having to run it through the cricut twice. I was able to weed the foil and get some resin right on there but because I don't have an even surface I had a couple of names come out not so 🔥. Lol 😆 But you are so kind to share your ideas and concepts💡 with the rest of us! Thank you!

[@creationsbyelaina8183]

Dope! Tfs!

[@gormangraphics]

Where you get tge Friday font

[@KrislieDIY]

It’s in my cricut design I just saw it there 😁

[@Kayla-kc7ty]

Thanks for sharing ! Love this ! Would you mind telling me what that little hook is called on the back of the K?

[@KrislieDIY]

It’s a earring bail 🙂

[@Kayla-kc7ty]

Krislie DIY thank you !

[@Kayla-kc7ty]

Krislie DIY could I see the keychain with my name please ?! Love them !

[@KrislieDIY]

You can message me @instgram handmade by krislie or email me [e-mail] 🤙🏽

[@loverayvonn]

Is that regular vinyl or htv

[@KrislieDIY]

It’s a permanent vinyl

[@Chellybelly_813]

Did you weld letters to keep all together or did I see u lay them individual

[@KrislieDIY]

I depends on the fonts that I’m using some of it I weld it

[@sandropeta]

So you don’t weld the letters

[@tkwashea30]

❤️❤️❤️❤️

[@mzmustang4033]

Where did you get the big letter mold from?

[@KrislieDIY]

At amazon it’s the backward alphabet silicone mold

[@bv5337]

Do you sand the back of the letters?

[@nicoleiaci4327]

I like those clasps for the keychain where you get them??

[@dejay303]

Cool keychains. I just feel like we didn't need to watch the letter spacing, cutting, and weeding. Other than that, good video.

[@jaycelgallana8703]

New subs here😊 can i ask what kind of machine is that?

[@KrislieDIY]

It’s a cricut explore air 🤗🤗

[@kendrasowell9490]

What type of mat is that ,or can you any kind?

[@KrislieDIY]

It’s a silicone mat

[@amandasalas2872]

What kind of mat is that

[@KrislieDIY]

It’s a silicone mat

[@janessatoledo1076]

Hey! How do you make the names? I mean what site with the fonts?

[@KrislieDIY]

Just my cricut account

[@danielorapeleng5928]

do pple actually buy these ?

[@KrislieDIY]

Yes , I used to sell it before but I don’t have time now ,

[@danielorapeleng5928]

@@KrislieDIY but do you think it's a lucrative business venture?

[@hildarodriguez5279]

🥰🥰🥰🥰🥰

[@evaramirez112]

Do you sell these somewhere, I must have one!!

[@KrislieDIY]

Yup I have my Etsy shop by the description below 🤗

[@bowsupply2777]

Never seen these before

[@victoradrianescobar3448]

Como puedo hacer asmr sasha

[@shimmymary5703]

Hey.can you please voice your videos for us to understand

[@KrislieDIY]

It’s hard for me coz I’m a filipino I don’t really speak english well

[@shimmymary5703]

@@KrislieDIY thank you.i understand.

[@shimmymary5703]

@@KrislieDIY how about you just write it.mostly on the machine for making the names.sorry IAM over asking.i want start resin art so I need tips as a beginner . thanks 😊

[@cherylbearden261]

Where did you get the hardware you put on the letter?