Peterbilt 579 Engine light clearing procedure

Thanks to a caller on WLW's ATN show. I will demonstrate the procedure to end the Truckcare light issue.

[@slapurmom5667]

Now I can drive home thanks. My dispatcher won't answer phone neither will the mechanic this helped out a lot thank you so much

[@brycehoffert6197]

Thank you!!!!! My light was on because it needed fuel filter changed. Changed filter didn’t know how to shut off light. Thank you so much! You saved me $100 at least at the dealer.

[@davidx4590]

SOMBODY N OHIO! U R THE MAN!! Reset, clear codes? Paccar? Pete? Key thingy?......DUDE!! U SOOO SAVED MY DAY!! WORKED LIKE A CHARM!! BLESS YOU!!!

[@jerometaylor554]

2020 peterbilt less that 2k driven emissions lamp came on just morning. Tried that method and it worked.

[@noahburkholder4627]

Thank you driver. Works like a charm .

[@chrisleath]

*I was just trapped at a fuel isle... I fucking love you brother* ⛽

[@sabel1264]

Than you ,you saved me from going to the shop to clear it! Keep up the good work!

[@GeorgeJansen]

What if the engine service light bottom lhs, does not go out

[@dkeist1]

Worked like a charm on my 567 dump truck!! Thanks man!!

[@ponypowertrucking]

Didn't work for a 2021 Pete 579

[@alcehelmstetter693]

Thank you driver..it worked for me..I have a 2016 peterbilt 579..

[@JayBando213]

Brotha I still watch this video.... 579 gang.... Mines got a Cummins

[@bencuevas5204]

Thanks man i just did it.and it worked out fine.you saved at least 300.00 dlls.for a hook up computer.

[@ghengistron1425]

How do I stop the bell sound or dinging?...the truck I'm driving dings all day

[@shanedelawder5383]

Having the same issue with my Brand new 2020 579. It's something to do with the sensor and the magnetic part as well.

[@gerardocastanon9628]

Any luck with that? I have the same issue currently

[@audleyprince6945]

Highly appreciated bro. One shot and it went away. Lol

[@GeorgeJansen]

Does not work for "repair scr system". 2018 Pete 579, paccar, automatic transmission

[@lathanhowe5531]

Have a 2017 Pete 579 with a ISX15 and it doesn’t work, tried it 5 times and can’t get it to go away I have both the orange lights on

[@naciramaevals650]

Thanks a million. Note: it also works on a 567 pete

[@sweetness2689]

What if the engine light doesn't go out?

[@macshawn4057]

Work in a 2022 Peterbilt 579 Paccer engine. Thanks 🙏🏿

[@fredtannous7365]

Worked on my KW T680 Thank you

[@johnschultz3170]

Thanks for the help worked perfectly

[@davidjungeblut8628]

Thanks.

[@Chancharbek]

Had regen problems on kenworth T 680 with 2 lights on. Couldn’t start the regen . after doing this procedure for several times with no luck , and then turning off the ac in the bunk at my last try , then I was able to start parked regen.

[@tyallen3765]

Yours worked like that. I too have both lights on and can't do a regen but it's not working :(

[@jordansbakery962]

Thanks bother, it worked!

[@krle27]

After doing this my abs light pop up... By the way no help with this to turn off engine lights

[@GeorgeJansen]

NOTE : Does not work for 2018, 579, with Def/dpf issues.

[@Ice_chava]

Is there anything that does

[@davidkattan1275]

Lmfao! That's the truck that I have, same issue a can message, nox sensor after catalyst . Took it to a peterbilt preformance shop, they didn't have the code for a new Ranger program.... so I had them replace the batteries, drove for about 170 miles, keep the truck running over night, woke up, turned truck off, eat breakfast, and when I went to turn the truck on, the dash board would black out and the start clicked . I got 12.4 volts ,but it's not starting. Wonder what could it be

[@xDirmeyerNFL]

My exact same issue. Didn't work for me. Even got 25 on the transmission / had to wait for it to come back to neutral and it started but STOP ENGINE IMMEDIATELY won't go away

[@charlesv3962]

It worked!!! Thank you driver!!!

[@TexasHarleyBoy65]

Thanks man. How do folks learn these workarounds???

[@hollywoodsaint57]

Good shit huh! 💪 ....i wish I could do that with my taxes

[@GeorgeJansen]

Did not clear my "repair Scr System" Warning. 2018 579, paccar engine

[@theoBaba773]

God bless you for this video

[@ramiroreos5356]

Thank you so much!!!I It worked on my 2016 pete 579 Cummins engine. Thank you. Imma call you YODA CAUSE YODA DA MAN!!!

[@mjk6662]

Thank you for your time problem solved

[@ArizonaChris96]

Thank you!! You saved my ass.

[@themillionairediy]

Only for manual trans

[@wandafeliciano3899]

Thanks a Bunch.👍👍👍👍👍

[@bibik1151]

is there a way to reset that light on KW T680?

[@darienhortas]

Where can I find the fuse for the city lights in front of a 579 2015

[@tonyibarra2551]

and for ABS light

[@davidkattan1275]

Hah! Here I am ready to do this, but I got a faulty ignition switch that gets stuck on the third turn lmfao! Bless my luck

[@kontrolledkhaos4853]

I have a 2015 579 with the Cummins i this method didn’t work

[@frankieporch5089]

How do you silence the high temp alarm when at idle on a 579

[@alexdavenport9129]

Worked. Thx driver!

[@NathanGassman]

Excellent! How can I donate to your paypal? Also...is there a reason the manual regeneration wont kick inwhen I push the manual button! Im in park, did all the instruction manual said to do but still wont kick in.

[@ericmartin894]

I got the dreaded red light. in a 2015 prostar with 15-litre big block Cummins. the Def light is sending out a lie. saying that the tank is low when I filled it up yesterday. I'm sick of these trucks.

[@bjtherealest4079]

Replace sensor

[@iitzDiRTY]

What’s the battery looking light in the top left corner? Mine comes on & beeps when I’m taking left curves then it goes away. I have no idea wtf is going on with that

[@579pete]

Coolant reservoir, coolant dipping below the sensor in the coolant tank.

[@markshepherd6504]

Just performed this on my 2016 pety 579… it work.. start the Fffffing truck good to go…

[@4jiggaalways]

You do that and an additional light came on😂

[@ahz3267]

Thank you sir!!

[@philiphankins5080]

Thanks !

[@jessideluna1846]

Work on my 389 isx 🤝

[@johnwilley3049]

Start the fuckin truck.😂😂😂 Thanks bro. I'm tired of my check engine light coming on after service and having to hand prime the fuel because the mobile mech didn't do it.

[@williameldridgelll3150]

🙏WOW Brother! Thanks 💯% from me & my 2018 Peterbilt 579 PACCAR X13. I was sitting @ a TA truck stop in Oregon stressing over that orange check engine light. I knew nothing was wrong with my engine, DEF, SRC, or DPF because I just had everything possible replaced 33 days ago @ the (Rush Peterbilt Truck Center) in North Las Vegas for $18,859.58. 💲🚛💰💔🤷🏽‍♂️😭 I check the engine dial on the dash board and it clearly indicated no WARNING CODES. I strolled inside the TA here in Troutdale Oregon and the service rep lady stated that it was going to cost me $270 just to hook the laptop computer to my truck and an additional $167 per hour. I strolled out immediately and said to myself, "I'mgoing drive my truck down the street to the (LOVE'S ♥️ Tire Care) because I have service there on file and credit. I just knew I was going to have to spend a lot of money again. I started stressing. I prayed and my self conscious something told me to look at KZbin and I saw your video. I tried your advice for the 1st time and the check engine ligh deactivated immediately. All the stress & depression I endured for 35 f#@king hours evaporated. Yes Sir, a fresh 34 hours reset completed and now I can get on this DAT load board and find some freight to haul. Thanks again bro!🛐

[@fontesrevenge1983]

Start the fuckn truck and "boom"

[@Mrswiserich83]

😂

[@AvtarSingh-ki5my]

will it work on 04 pete 379 cat 15 MBN?

[@jmaegm]

It didn't work for me

[@williamrodriguez9712]

Thank u.....question how come the light comes out is it a sensor ???

[@enrique88005]

Its always a stupid sensor

[@jrmpup]

It worked..ty

[@savtranstwg66]

Didn't work for my Pete 579!!!

[@freecandy9193]

Well how old is it and u probably did it WRONG

[@luisreveriano4172]

Thanks I love you

[@jeffrose5085]

How to diagnose radiator warning light ( is not low on water)

[@leftlanekr2295]

i have the same thing on my kenworth t660 did you ever find the problem i really need help

[@romchik2500]

I had that issue where I had enough coolant in the tank but the light would go on and it would beep. What I had to do was replace the whole coolant reservoir and it fixed the problem. I have 2015 Peterbilt 579.

[@mattfoster8077]

Un plug the low coolant sensor

[@jodhsinghdhillon3055]

Canage the coolant reservoir. I had the same problem and I have to tow my truck removing the sensor not worked on pete 579 2020

[@markcobb6561]

Doesnt work on the 2016

[@keiyennehijin8643]

Didn’t work for mines

[@christian65045]

I had to do it 3 times for mine to work

[@brucebrown5464]

Yes but that doesn't fix what is wrong with the truck

[@terryportis667]

Exactly...that accent kinda tells me all I need to know..."get er dun"

[@byssbiscit7578]

😂 same here but didn't work for me i got a 17.

[@GeorgeJansen]

What about soot high level? Too far gone?

[@brandonrobinson287]

...do a parked manual regen sir.

[@davidbrooks4285]

Nope,didn’t work on my pete

[@mikewasko4964]

I havnt tried it yet but looks like in the comments it works ..I just bought the truck 2019 579 with a paccar ..lol ..havnt even got it out the driveway and the check engine light is on im assuming because its been setting for 4 days and the Batterys got low and it detected low Batts when I started it ...I have no warning lights or any faults , just the thing popped up saying low batt when I cranked it and then the check engine light stays on now ..im going from a 2005 kw w900 with a cat to this pos because the co I leased to requires a 2014 or above truck now ...ive never in my life seen such junk ..nice truck inside and out but the paccar motor and auto trans is freaking me out with all this electronics bullshit ...ive always worked on my own truck even rebuilding the engines myself with a little help from my cat mechanic neighbor...I think im going to kill myself if I have to keep going to the dealer to clear codes, engine lights ect....I have my old truck for sale but I feel like just putting this electronics space ship up for sale and rolling back out in my old truck ...if you see a red 579 Pete sitting on the side of the rd with the flashers on dont bother stopping to help because ive probably already killed myself and there's nothing you can do to help me . Seems KZbin and vids like this is the only thing that can save me so thanks for putting this vid out ..ill give this a try in the more and God willing it will clear and I dont have to go to the pete shop before I even put my shit in the truck and a tag on it 🤯

[@dieselkenny4568]

Your Truck still running good? I also have a 2019 579 this light comes on and goes off on its own. Oddly enough computer dosnt pull any fault codes either

[@Youtubekert]

It’s not clearing for me

[@ryancolleneiloveyou4752]

My truck comeing up with a scr damaged truck will derail in 3 hrs engen chugging loosing power wtf do i do now ..any 1 help

[@SkippyTheMagnificent]

He died. Rip

[@Darkwardrums77]

Try removing the abs ignition and abs battery fuses. I've heard that tricks computer since it then can't sense the wheel speed.

[@microfister]

Darkwardrums77 I literally had to do this the other day to keep from going 5 mph and get to the shop, problem is it will still rob the power and only top out around 55 mph without any speedometer reading, but better than limping at 5 mph

[@gherasimtibi]

boom!

[@brunothebruisera.k.aleftho2971]

Then 5 miles down the road...lol

[@hollywoodsaint57]

😆😆😆...I even wiped all my codes with a J-pro ....And right down the road the engine light came back on. Less than 5 min

[@enrique88005]

Little piece of black tape solves the problem as well😂

[@walterkubay5959]

Tnx 👍👍👍

[@acapulco1231]

🤣🤣🤣🤣🤣🤣