FORD FIESTA REAR BRAKE LIGHT BULB CHANGE

[@knowitall3503]

Thanks chap, you saved me loads of time. What a faf to change a bulb. Hope they don't blow too often. Thanks again .

[@fra948]

Thank you for the clear instructions, saved me some bucks!

[@pecosimplu7070]

thanks, great job, very helpful background music 100% useless cheers

[@HandymanTests]

😊

[@lieandreality8238]

Thankyou so much. You have saved me some money 💰

[@HandymanTests]

👍😀

[@wilmerchavez9199]

Hola, la luz de retroceso de ese lado que usted saca no me sirve, pero la del otro lado si. Y verifique cambiando el bombillo y nada. Debe ser el conector. Como puedo verificar o cambiar ese conector

[@ianhill4585]

I spent two half days trying to fix a bloody tail light not working, tried various bulbs , cut the terminal off and put a new one in, flattened the battery in the process of trying to fix the light (battery is under the floor under 3 covers last held on with 6 bolts) so quite a faff to get the jump leads on it. Happened to walk around the front and saw the sidelight was also not working , then it hit me, the bloody fuse was loose in its holder , wiggled it, voila, a job that took over a day to diagnose was fixed in a minute. Welcome to the frustrating world of cars.....!

[@susanparkinson3782]

Thanks, didn't want to take it to the shop and admit defeat, so fixed it myself with your help 😁

[@martinhudson2552]

Great video.

[@HandymanTests]

Thanks

[@martinhudson2552]

I changed the bulb within 10 minutes using your video.

[@sneakpeak3855]

just changed the exact same bulb but its still not working i switched the bulbs around and it isnt the bulb as they all work when swapped.. dam it..what could it be the connection ? im guessing not the fuse as the top 2 bulbs work just not the bottom one

[@Droelfi96]

Got the same problem, you got a solution already ? ^^

[@sneakpeak3855]

@@Droelfi96 yes it was the reverse light bulb 😂😂😂 it only comes on when in reverse

[@nickh5352]

​@sneakpeak3855 as in, you didn't have the car in reverse? I have this issue only one reverse light works the other doesn't. That metal wire board was slightly corroded at the bottom wherthe globe is I've cleaned it up but stil no reverse light on 1 side. Wires seem ok I can't find my light tester to see if it has power. Witch colour is reverse?

[@nickh5352]

​@@Droelfi96same read below

[@beamer2187]

same

[@AndyMorphs]

Do you know which colour the reverse light wire is?

[@HandymanTests]

I won't check it now, I sold the car.

[@AndyMorphs]

@@HandymanTests figured it out thanks anyway

[@nikolaosdimitrokallis6074]

Thanks lots. Would it be possible to know what kind of screwdriver you used?

[@SelfIndulgentGamer]

That's a torx bit

[@ianhill4585]

Looks like a universal tool that holds multi bits, screwdriver ,Allen keys and yes torx .

[@xadamlaax]

Thanks for the straightforward vid!

[@biskopt1628]

Thanks for vid!

[@willpalmer3683]

Thanks 🇬🇧

[@michaelellis9313]

Cheers mate 🫡

[@thebanditsix]

That's the reverse light bulb,the brake light bulb is the top one.

[@SuperBlackguard]

Thankyou

[@parasztoroszlan]

Many thanks 😊

[@boerattila3088]

What kind of light bulb did you use?

[@HandymanTests]

Basic criteria in a car shop. ;-)

[@peternufc81]

Cheers man 👌🏻

[@zahnking8474]

That’s ridiculous just to change a bulb Jesus Christ

[@HandymanTests]

AMEN