We covered a lot today, but there's still more to learn! Let's start with Guiding. If you are photographing an object to the North, you may get a message when you start the Guiding Calibration - something like "Object is within 30* of NCP, please calibrate away from celestial pole". At this point you have two choices - ignore it and continue, or fix the problem. Basically what it's saying is that you should not calibrate your auto-guider when aimed up North. Since all the stars rotate around the North Celestial Pole (near Polaris), they won't move very much over the span of 5 minutes. Just watch a Star Trails timelapse video to see what I mean: kzbin.info/www/bejne/sITNdJidaLurr6c One of the best ways to improve your guiding is to aim the mount (and camera + telescope) to the celestial equator. That's a fancy term for the arc in the sky where the sun, moon, and planets move across throughout the day/night. Anywhere along this arc, from East to West, will provide better guiding results than the Northern sky. So, once you get to Step 3: Go-To, you could use the Sky Atlas feature to aim towards the celestial equator instead. Then start Step 4 - Guiding Calibration. Once the mount has completed the calibration, you can use the Sky Atlas to center up the object you actually want to photograph. The Guiding is smart enough to translate the calibration info to this new target destination. (This is assuming you have a go-to mount connected, like the AM5, and are not using an ST4 cable.) I recommend turning off "Auto-Restore Calibration" in the Guide Settings. If this is turned on, there's a good chance you'll encounter problems. If you have any issues with guiding, it's always a good idea to "Clear Guide Calibration Data", using the button above the Begin Looping arrows. This will clear out your initial calibration though, and you'll need to re-do it. However, there's a chance this will fix the underlying issues affecting your guiding performance. Another thing to keep in mind is just how sensitive auto-guiders are. Even walking around near your tripod can disturb the guiding. This is why it's best to walk away during the calibration. If I ever need to touch my rig at all, I'll Stop my guiding temporarily. Otherwise it will freak out. When I've finished what I need to do, I'll restart the Guiding. Once you get the hang of the Beginner's Workflow you may want to try Dithering. This can be turned on in the Guide Settings Menu. Dithering will trigger after every photo, and cause your camera to move in a random direction. This movement will be very slight, between 1 - 10 pixels (which you can configure). However, this slight motion can actually help to remove hot pixels, sensor banding, color mottle, walking noise, and more! For more information, check my dithering tutorial: kzbin.info/www/bejne/m3e2YqeFiZWdr5Y Next up is Polar Alignment. I mentioned that there's an All Sky Polar Align feature, which can be enabled in the Info menu. This can be very helpful if your view of Polaris is blocked by trees, buildings, or anything else. You'll be able to aim towards the southern sky instead, and use that for the alignment. Watch my full tutorial here: kzbin.info/www/bejne/h4GVi2ZompqNmas Speaking of Polar Alignment, you may still run into problems with the Plate Solving step. While I covered this to some degree in the video, there are a few more tricks to try. If you cannot plate solve, click the stop button. Then change from PA back to Preview. Use the Sky Atlas to aim the mount away from Polaris, it doesn't matter where. When the mount has moved to the new position, take a photo in the Preview interface. Next, click "Solve" on the left. This should be able to Plate Solve the image now. If it succeeds, click "Sync Mount". This ensures the mount knows where it's pointing. Go back to the Mount Settings and "Go-To Home". Then restart the Polar Alignment steps. Finally we have Meridian Flips. I intentionally left this out of the video. There's simply way too many potential problems for beginners, and I don't want anyone's gear to get destroyed. However, a Meridian Flip will allow you to photograph your target all night long. All you need to do is turn on the switch for Meridian Flip in the Auto-Run menu, where you configure the shooting schedule. Once the Meridian Flip button is turned on, your mount will automatically move the camera and telescope when the object you are photographing crosses the local Meridian. If you draw a line from due North to due South straight overhead, that's the Meridian. If the object you are photographing is already to the West of the Meridian, than the Meridian flip won't actually trigger. For more information on Meridian Flips, watch my tutorial here: kzbin.info/www/bejne/pZychoKbbtFqhas
@ahmedwaddah93919 ай бұрын
I had issues with the AM5 and meridian flip. So I would image a target just before it crosses over and stop and go to another target, and when the 1st target passes the meridian, I would go back to it 😁.
@mikehardy82479 ай бұрын
You mention how sensitive autoguiding is. If occasional clouds occur, the guiding goes crazy. You think it's better to turn it off, and maybe lessen the sub exposure time?
@PeterZelinka9 ай бұрын
@@mikehardy8247 if clouds start to interfere with the guiding, I would Stop the guiding until they blow over.
@lastnovicewins8 ай бұрын
Thank you so much. I was running in to these issues.
@kyzercube8 ай бұрын
I have one question Peter. I want to use the ASIAir just to run a guide scope camera as I'm using a DSLR ( a T6i ) for my main camera and do not want it to run through the ASIAir. Will that cause any issues?
@mikehardy82479 ай бұрын
I've had my asiair for a year. No one tutorial, or post has come close to explaining all the features it has. This proves that. I've learned a bunch of stuff here!
@fjrodrick7 күн бұрын
Very helpful tutorial. You just sold an ASIAir for ZWO. . .and probably a Duo, too. Thanks!
@dretwav9 ай бұрын
Just a note that you should always pay attention to when your object is goint to cross the meridian. I have AM5 so I just turn on auto-flip. That may sound like it is not a beginner tip but if a beginner selects an object that is going to cross meridian in an hours and does nothing with meridian flip then it is going to be confusing as to why your autorun didn't complete.
@akschu19 ай бұрын
I'm not an android guy, but the iphone will connect to a wifi, figure out it doesn't have internet, ask if you want to stay on wifi, then use wifi *AND* get its internet from LTE. Works great when connecting to other wifi cameras or devices.
@DeereX7484 ай бұрын
When entering Lat/Long info on the ASIAir, if you're using an iPhone and have the compass app, it also has your GPS-derived Lat/Long and elevation when you open it. Handy location reference.
@davehenzel21719 ай бұрын
Great video, and perfect timing. I just received all of my equipment yesterday and wanted a good tutorial on the ASIAir. There are several on KZbin, but they're all 2 to 3 years old. Appreciate you doing a video on the more updated settings. Also on very similar equipment, I got the AM5, RedCat 51, ASI533MC.
@98vwgolf9 ай бұрын
Another AWESOME feature, is being able to use image management to back to a target you were working on the night before. Plate solving is a game changer
@petekeleher9 күн бұрын
Thanks!
@tveilleux4 ай бұрын
Thanks! This really gave me confidence for first light!
@aaronsmith74155 ай бұрын
I ran an Ethernet cord out to my setup location and plug it in directly makes connecting to the air so much easier and more stable.
@microreniassance29295 ай бұрын
This is a little bit of a tangent, but I hope still appropriate. Instead of a pad or a phone I am trying to use my laptop (Win 10) with the BlueStack program. I haven't had a problem with connections, etc., so it seems to be working--on the surface. Have any idea of problems that I will encounter using this setup? For reasons I won't go into, I can't use a portable device like a phone or a pad and I will be stuck using the laptop. Can you see any problems in using this setup? Anyone else trying to run using this setup? Any comments would be appreciated. Absolutely great video. Very informative. Goes at exactly the pace I need. Great work and much appreciated.
@PolarisClubfanАй бұрын
Thanks for the amazing tutorial, please keep making more videos like that
@grahamroberts11168 ай бұрын
I am a fairly experienced imager using a more conventional set-up but now just embarking into using the AM5 + ASIair combo and was really happy to find your excellent video, which is comprehensive + well explained and at a good pace. Many thanks, I'll certainly be checking in to your channel in the future. Particularly pleased to see you touch on the All-sky PA option as I have not sight of Polaris (my house is in the way!) - you mention another video covering this subject in more detail, could you pleased point me to the right video for this? Also - is there any way to warm up the sensor when finished imaging using ASIair to avoid thermal shock?
@ACKitsBilltheCAT8 ай бұрын
I've been using ASIAIR since 2020, and this is by far the best beginners guide I've seen to date - excellent job! I'll be recommending this to others. Also, the tip about editing target names to include useful information such as filter used is very helpful.
@tristanhughes4481Ай бұрын
Peter thank you so much for this. Entering intro astrophotography i have looked for intro tutorials and this was perfect.
@curtisbreslin20775 ай бұрын
Well done! I have watched several ASIair beginner tutorials and this one demonstrates several features that the others do not.
@briankotak4039 ай бұрын
Thanks Peter. Useful video. In the Autorun menu I choose to return the mount to the home position but not to turn off the ASIAIR when the imaging session finishes. That way the power is still running to the dew heater strap and I can do my flats first thing in the morning without running the risk of having condensation on my optical train (and thus screwing up my flats). Dr B from Manitoba, Canada 🇨🇦
@AnalogMonoxide8 ай бұрын
Great video, thanks! Waiting for the cat and AA to arrive, really helpful having an overview of the whole process from the get go.
@denniswatson50664 ай бұрын
Thanks for great video. This video picked up exactly where I am at with my new scope set up. Can’t wait to power up and get started
@Jim_Mundy8 ай бұрын
This was a fascinating video for me. I’m just starting out with my mirrorless camera, a Sony A7iv and a Samyang 135. But I have a feeling I will want to upgrade after some success in the field. Thank you!
@greggshadel57759 ай бұрын
Great video and a reminder of unused features I've been missing out on. You mentioned a future video about grainy images and I'm looking forward to that.
@DeereX7484 ай бұрын
Can you do as much as you can with the setup while you have the telescope inside the house? Such as everything to get the specifics turned on and entered (ASIAIR initialization, camera types, focal lengths, mount type, etc) up to the point of taking pictures to establish focus and aligning? The weather here has been crap and I have few nights available just to get set up, much less do any image gathering.
@woody51099 ай бұрын
By far the best ASI demonstration on the net, thank you sir, I’ve learned soooo much here. 🙏
@mwales21129 ай бұрын
Your guiding is to die for... I struggle bad with guiding....
@ssdheeraj63479 ай бұрын
Thank you for the video ❤
@mikehardy82479 ай бұрын
HaHa, you solved an issue with my asiair mini. I started with the asiair +, and bought a mini to use with other combinations of gear. My previews are green on mini, not on +. I asked tech support at Highpoint. They didn't know why ( in no way a criticism, we're all constantly learning)! You just explained it with white balance settings.
@EmmanuelOkorie9 ай бұрын
Thanks for this video... I took my first foray into Guiding with my SA 2i a couple of days ago, despite having owned the ASIAir Plus since early spring this year. I have to say, your videos have been a great source of help. You are clear with instructions as well as mentioning the pitfalls. Made good use of the guiding yesterday to image the Pleiades with a Sony a6000 and the Sony 70-350mm at 350mm. I managed 2-minute exposures at f8 and ISO 1600. Just need to wait another night to try again. Keep up the good work!
@Streaml1neJMoose9 ай бұрын
One other thing I found that can prevent plate solves in the polar alignment is not taking into account if you have a field flattener/reducer installed. The effective focal length in my case needed to be multiplied by 0.8 to get the true FL to enter into the main scope FL setting. Then it worked perfectly.
@elvisvelez66095 ай бұрын
You're the man! You make it easy to follow and to understand the workflow, thnx for always bringing relevant good info to us. I've learned so much from you're vids.
@terrybarnes3256 ай бұрын
As a total newbee to the ASIair i have watched many many videos on KZbin on how to set it up and use, i have to say this is by far the best video for that, you take you time to show every step from start to finish which is not what of other videos show, I raise my hat to you and thank you for a most informative video and now look forward to my first shoot once we get clear sky's here in the UK. Thank you, Thank you, Thank you :-)
@CowboyAstronaut4 ай бұрын
Would you happen to have a video of how to make the photos not grainy. 27:14 you had mentioned! Thank you!
@janetwillson35026 ай бұрын
These tutorials are the best I have found. Very clear and informative! Thank you!
@haggy389 ай бұрын
Excellent, thanks, Regards from Bogota
@rwilbourn993 ай бұрын
Brilliant. Thanks Peter.
@calabrais4 ай бұрын
Legendary tutorial, many thanks!
@jds17764 ай бұрын
Thx for this vidéo, a lots of détails ! After the polar alignment, you don't reposition the mount in its home position? And don't forget to retighten the azimuth and altitude locking screws - This has happened to me many times! 😅
@mikesuttill487 ай бұрын
I appreciate the detail you have gone into in presenting your workflow and have learnt a lot from it. I mainly do planetary imaging using ZWO MC camera, ASIAir etc. I have one question that does not appear to be addressed in most instruction videos on the ASIAir which is: When inserting a 3 x Barlow into the imaging train does one alter the focal length of the OTA entered in the ASIAir menu for the main camera to 3 x the focal length of the OTA or leave it at the original setting? Any advice you or your followers can give would be much appreciated.
@1clancym9 ай бұрын
"and are not using an ST4 cable" I recently ran a Ethernet from my inhouse router out to my HEQ5 mount, and plugged it into my ASIAR+.. My ASIAIR and my mount just could not get pointed in the correct direction. And I did get the message "Object is within 30* of NCP, please calibrate away from celestial pole". multiple times. Never got it before. Can you explain what this issue might be with an ST4 cable? Thankyou for the terrific video. Anyone new to this pursuit would be well advised to purchase Peters course. Saved me a lifetime of trial and error. Thanks Mike
@peterdonnelly10746 ай бұрын
This was truly fantastic. Many thanks.
@dh29709 ай бұрын
Peter - This is very helpful, thanks!!
@Si-fp2ij9 ай бұрын
Very nice tutorial Peter 👍👏👏🌌🔭 Cheers Si
@user-rz8jm1ur2q9 ай бұрын
Great tutorial! Thank you for putting together an excellent learning tool.
@joaomoreiraastrophotographer9 ай бұрын
If im using a crop dslr, on main FL i put the original FL of my lens or the FL with the crop factor? thanks :)
@oliverwoodman-smith69519 ай бұрын
Ditto. Am using a crop APS-C Sensor with a RedCat 51 for main telescope. So do I use 250mm or with crop factor, so 375mm? Thanks Peter, you astrophotography videos are brilliant, really got me into this - super easy to follow. Clear and concise. Best I've found.
@JR-dn5cn8 ай бұрын
wow it was very helpful!!! Thank You!
@mar12469 ай бұрын
Awesome this is very handy Peter!
@mikehardy82479 ай бұрын
How accurate does the leveling need to be? I do under 1 degree in 2 directions.
@OVRCOME9 ай бұрын
Love your videos. One thing that I can’t find a lot of documentation on is the Sky Atlas feature in the ASIAIR. How to use it to search for targets would be very helpful using the filter search. I live around 123ft pine trees so degree above horizon & which direction is visible to me are a consideration. So inputing that data in the ASIAIR to see what targets I can shoot is confusing. Also no one has made a video on it as far as I can tell.
@nigelking15364 ай бұрын
Peter 2 clrofocations that you have probably discovered by now. First polar align doesn’t need Polaris just polar align from the home position when you are generally pointed at the pole. We don’t have a suitable star in the southern an PA works fine from a mount align Sputh. Also the Asiair will accept the name of the object in the search window, you don’t need to know the catalogue number.
@WRX20019 ай бұрын
Peter Great video, I also noticed that when I focus and polar align with an narrowband filter, I have to increase the exposure time and the gain to allow for focusing and polar alignmemnt to work. Have you had the same issues?
@paolofat529 ай бұрын
I have to as well using narrowband filters
@user-wz2fj3ns6j7 ай бұрын
Thanks Peter. You have many good videos. I know the guide pulse setting is the maximum time of the pulse. But exactly what is aggression? Does it shorten the guide pulse or does it make it stronger or what?
@randallpatrickc8 ай бұрын
Excellent vid - very timely just got my ASI Air+. You recently did a vid on using SkySafari as well as the ASI app. Can you advise how to do that again on SS 7 Pro?
@scottrk49305 ай бұрын
Very good Tutorial . Thank you . When you pause the Run and slightly change the composition , does the Guiding have to refind new Guide stars ? Anyway , since the ASIAir won't support my current Mount , Focuser or Camera I'll just have to keep hoping that ZWO will release a "Universal" Model where everyone can use their Product . Cheers .
@MrStrativarius5 ай бұрын
Hey Peter, TIA for all of your amazing videos. You are so helpful. I just got my ASIAir Mini, and have the Sky Watcher Star Adventurer GTI and my Nikon Z7 with a variety of lenses. I can't get my ASIAir to see my camera. I looked in to wifi settings, and don't see an option to turn on power for it, like there are for the Plus. Do you have any ideas?
@SmeeUncleJoe5 ай бұрын
I'm an absolute beginner. i was hoping to find out what I need and, in this case, what is ASI Air and why would i want to spend yet more money on it ?
@dgdave267315 күн бұрын
Hi Peter, does the ASI Air Plus supports Al-AZ mounts?
@alexands17 ай бұрын
Has anyone managed to get the Sony A1 working with the latest beta of ASIAIR? The Sony A1 is on the list of supported devices and it is recognized by ASIAIR but I get an "exposure failure" error. I've tried lots of different cables. Thanks for the amazing tutorial on the program, by the way.
@dmpaseАй бұрын
Mr. Zelinka, thanks for this video! What do you do if you have two separate cameras, but your guide camera and your main camera are the same make and model? Does the new ASIAIR handle that situation OK? My main and guide cameras are both ZWO ASI290. My older ASIAIR Pro seems to get confused and periodically disconnects one or both cameras.
@alansheiness814819 күн бұрын
I tried perusing your videos to find the one you reference re: focusing the guidescope; not sure which one it is. But in a nutshell, would one simply select the guidescope as the main camera and then do a normal focus like one would do with the main camera, and then switch it back to the guidescope camera?
@Visualographer_9 ай бұрын
Hey Asi Air users ,Is there a way to dither without guiding?
@mikehardy82479 ай бұрын
I ponder this as well?
@ACKitsBilltheCAT8 ай бұрын
no
@spex3579 ай бұрын
I couldn't complete the plan because my system had a 1.37 degrees view, which is fine for looking at the Sun, but rubbish for stars. I've since changed my camera to one with a bigger sensor, but its been raining or cloudy since.
@petelopez58263 ай бұрын
Trying to decide if I should Go the mini pc route or Zwo. I do like the simplicity of Zwo.
@jimcarter20923 ай бұрын
Yes, that's what I was trying to decide also, with using the mini PC your not bound to the zwo products or their "ecosystem" I had some struggles getting ascom and the other 4 apps needed on PC working and communicating I decided to go with the zwo Asiair products a little more Spendy but it is a good product and I like the simplicity of the asiair. And everything needed is all apart of it. It's like using the seestar s50 smart scope. In a way. But now I'm very happy I went with this route and still in the process of learning it by watching everything I can on ytube everybody presents a similar, but different presentation. Good luck! 😊
@petelopez58263 ай бұрын
@@jimcarter2092 I did the same thing and went Zwo eco system. Just wanted the simplicity without having to find everything or download. Just wanted to get started and learning. It’s overwhelming trying learn everything. I went the mini, 120mini guide scope and asi585 mc pro camera. Just make sure it’s focused during the day with low exposure to get you in focus. I got my first image but it wasn’t the best. Still learning.
@mr.f.96729 ай бұрын
Great video but what about the Focus tool. I think it's powerful but I have problems to move the green boxes around the frame if asiair has it chosen for a star once.
@MrMrduke19759 ай бұрын
So if you’re shooting one object for the night, and you plan on doing multiple days of that object, can you just get home and transfer those pics on your PC to keep your Asiair empty?
@jtepsr4 ай бұрын
Last I used my asi air with my zwo rig, how is the best way to take the darks, flats and bias frames.
@davidletz91239 ай бұрын
Thanks Peter, this is very relevant for me because I recently acquired the Mini and the AM3. I am confused about the red and blue boxes that appear when choosing an object to image, namely the rotation of the boxes. Right now, I am using a mirrorless Nikon. Does the box correspond to the angle of the sensor with respect to the image? If so, if I adjust the camera angle (say, landscape to portrait), will that change on the ASI Air interface as well? Thanks.
@microreniassance29295 ай бұрын
Does it not make sense to use Live or Video to help with focusing so you have a "real time" look at your bhatinov mask as you are focusing?
@saulontheroad96056 ай бұрын
Just curious, why using a ASI2600MC Duo and still needing a guider ?
@sHuRuLuNi9 ай бұрын
The thing that irks me, and I cannot find any documentation on, is in the Guiding Window, you have these 2 icons on the right side "Flip" and "Clear". Now, I do not calibrate that often because observatory so don't need to tap "clear", but often I do not use the automatic meridian flip, but instead manually slew the mount to the "other side" when I want to continue imaging. Now, should I tap on "Flip" after I have done this, or not? And, since I slewed the mount using Asiair, then shouldn't Asiair "know" that the mount is now already "flipped" - in which case why would i need to manually tap on "Flip"??
@jtepsr5 ай бұрын
Peter I am waiting for fedex to deliver my am5 mount and asi air plus, is it safe to mount the air plus on the side of the mount
@woody51099 ай бұрын
Question: does the cooling actually take you to that temperature ie -20c or does it take your current ambient, less the 20 degrees? Big difference if your building calibration files indoors?
@ACKitsBilltheCAT8 ай бұрын
-20C is the actual temperature of the sensor in this example.
@jasonevans58706 ай бұрын
Hello Peter this is a inquiry to how you have got the 12v outputs on ur ASIAIR mini in this video as I can’t seam to be able to get them to show up in the app. Any help would be greatly appreciated. Kind regards Jason
@waltlickteig11059 ай бұрын
Just curious, but where did acquire the Bahtinov mask shown in the video?
@mikehardy82479 ай бұрын
In image management, how did you get the check boxes to apear on the subs you selected for deletion? It would be handy if you could select folders for deletion. I wish there was a way, after an imaging session, to plug a USB drive in and simply drag the folders from internal storage to that drive. The USB ports are precious, especially if a DSLR is being used (with large file sizes). Not having the ZWO cameras USB hub. It's extremely annoying to use the USB "C" port on asiair, and plugging it into PC. Especially with mini having no micro SD slot.
@98vwgolf9 ай бұрын
Ive used mine in station mode, and I'm able to connect through my network on my pc to the asi air and copy over my files to my pc.
@mikehardy82479 ай бұрын
I kind of forgot about this feature. Is it painfully slow? I guess it doesn't matter. My editing PC is air gapped. Thanks!
@WRX20019 ай бұрын
Peter whats the diffrenece between live and Autorun?
@skywatcher62 ай бұрын
It happened for the first time when the telescope moved 60 degrees twice and hit the tripod. I didn't understand why this happened.
@mantownmedia789 ай бұрын
what I have Starsense for my Celestron AVX and an ASIAir? I know it is probably redundant.
@mantownmedia785 ай бұрын
I sold my Starsense and now just use my ASIAir Plus exclusively! Thanks for all the tips Peter - I am also here in Seattle.
@jeroexx9 ай бұрын
my asi air acts like it's in the wrong hemisphere when I point due north, to get the heart nebula as example. I take a photo, plate solve, and tell it to go to the heart nebula. the mount will go into the complete opposite direction of where it's supposed to be. I just tried to get it to work for over an hour unti I gave up and pointed it towards the Horsehead nebula and it just worked without any issues. do you have any idea on what that could be? coordinates are right, and the time is right, I have no idea what else to do anymore. I work with the skywatcher star adventurer gti and the asi2600mc pro
@mikehardy82479 ай бұрын
I've had the same issue with my GTI, and it's crashed into mount. I don't have a solution either.
@greggshadel57759 ай бұрын
I had similar experiences with ASIAIR+ and AM5, and found that even though I had set location, it didn't stay set. I'm in US and the location was getting reset to China even after hand entering the location. This happened when using an older android tablet without gps. I solved it by starting ASIAIR plus using a newer android phone with gps before connecting with the tablet. I also synced mount and configured it with my home location. Eventually ASIAIR started using my last location as default.
@abulka7 ай бұрын
Please don't assume everyone is in the Northern Hemisphere and looking for Polaris. If you are in the Southern Hemisphere you point to Octans (Polaris Australis). Of course we in e.g. Australia are used to this and will automatically make the adjustment mentally, but it would still be nice to feel that you are talking to an international audience.
@MCCRITTERS9 ай бұрын
Hi! I have a brand new ASIAir + with Canon Ra DSLR but am having an issue with preview mode, and goto with the camera. When I take a preview picture or try to focus, the photo that shows is one taken previously. For example I take a preview photo to check focus, framing etc. put on a bahtinov mask , take another photo, it still has the previous photo show up. I have to take another photo to show the masked one. Same when I take it off. It seems like the pictures are lagging behind in some internal buffer. Trying goto commands or plate solving is impossible LOL. Anyone else have this? I tried both saving to internal SD card and not . doesn't seem to make a difference. TIA
@stolguy9 ай бұрын
I have the same combination. Things I had to do; - I noted that preview was slow at 2.4 and switched to 5g. I also have a radian quad and filter so needed the iso super high over 25000 to plate solve and polar align. Return to normal iso for lights. And of course usb ports are critical for the EosRA. Also I found that 30x preview window on the EosRA as good as anything for focus. Much faster than a Bahtinov mask and super tight stars. Good luck neighbor, from Canada
@x5ilco5 ай бұрын
wish i saw this sooner, wouldnt help regardeless, sold my ipad few months ago, not getting that lucky piece of trash back
@gilles9876543219 ай бұрын
Hi, If you return to SkyAtlas and change slightly the position from the original GOTO, what happens after a meridian flip? Does it try to return to the original GOTO position or does it remember your modified position? This could potentially alter the results...