You Need.. CTSPG013 Peugeot 207, 307, 308, 3008 Steering Wheel Adaptor with Reverse Sensor Audio Support CTMULTILEAD.2 Stereo Patch Lead Amplified Radio antenna adaptor all from Dynamic sounds uk
Пікірлер: 40
@leonperry12310 ай бұрын
did you change the arial for the DAB?
@waynejackson654219 күн бұрын
Where did the Original display with temperature etc plug into ?
@shamazuddin16 күн бұрын
It has its separate wiring like the stereo behind the unit.
@bungabongo2 жыл бұрын
Thank you this is very helpful. Is the features of the oem unit still intact, for example the trip computer, etc and do you have a heads up display, if so does the information still appear on there please? Thanks.
@shamazuddin2 жыл бұрын
Hi I have the heads up display and happy to say that on my model everything still works, even the steering remote, I can also confirm that i now have a double din installed with the same harnesses with no issue, as the multi info display unit doesn't show properly when it's hot so I detached it and put it away, and replaced with a sony dsx-b700.
@shamazuddin2 жыл бұрын
Just one more advice when choosing the stereo, due to the angle that it sits on some units can be hard to read! So choosing Wisely
@jimmydclarke4 ай бұрын
Weird my factory 3008 stereo has Bluetooth. Maybe mines special. 😂 I do want to upgrade mine though to double din
@HoldSimp7 ай бұрын
I've got the 2010 Peugeot 3008, I have a Kenwood none android double din, what happens when you lose the display screen regarding faults and changing vehicle parameters. Thanks for any help.
@shamazuddin6 ай бұрын
OK so far as I'm aware you will only loose your vehicle parameters so be sure to cycle though and set the as you want ie greeting lights etc, the unit mainly displays the original stereo settings, ie radio stations etc, any faults are show in the centre display located between the rev counter and speedometer. I have still kept mine incase, but never needed it again, Also the unit would not display properly during hot summer days which is very annoying
@HoldSimp6 ай бұрын
@@shamazuddin thank you for your reply, much appreciated.
@ro88o312 жыл бұрын
When you were scrolling through the vehicle settings were you using the scroll wheel and the arrows on the right hand stereo stalk? You didn't show exactly what buttons you were using to keep controlling those functions. Thanks
@shamazuddin2 жыл бұрын
Good point! I was using the stalk on the steering
@ojustaboo Жыл бұрын
Can you confirm whether the original radio was the RD4 or the RD5 please? Did it have the usb connect in the centre console storage ? Thanks
@shamazuddin Жыл бұрын
I can't remember which it was, but it was just a standard cd player with a aux input in the centre console, but had no usb
@muhammadimranmuhammadjuns4564 Жыл бұрын
Hi bro sorry out of topic..is that paddle shifter come original or you install it aftermarket
@shamazuddin Жыл бұрын
Did you mean the paddle shifter for the gears? If so, then they are original that come with car
@muhammadimranmuhammadjuns4564 Жыл бұрын
@@shamazuddin ya bro thats right..thanks for the info..by the way is that car using Ep6 (1.6 turbo) engine with At6 (6speed gearbox)?
@shamazuddin Жыл бұрын
@muhammad imran muhammad juns I'm not fully sure, but this is the 1.6 exclusive model, with 6 speed electronic auto gearbox
@muhammadimranmuhammadjuns4564 Жыл бұрын
Great..i'm asking because the malaysia 3008 model doest come with the paddle shifter so thinking to mod it.where are you from sir?so i can try to find some ideas from your country model to install it
@shamazuddin Жыл бұрын
@@muhammadimranmuhammadjuns4564 from the UK, i don't think you can mod it as its factory standard!
@taracolwell30493 жыл бұрын
Please can you tell me what parts you used to complete this job? I’m currently wanting to do this too. Thank you in advance.
@shamazuddin3 жыл бұрын
Please see the video description, and top tip you need to connect the remote jack first.
@shamazuddin3 жыл бұрын
Please see the video description for part, and watch Watch "Connects2 Presents: The Steering Wheel Interface" on KZbin kzbin.info/www/bejne/nqWmY5umr62Ela8
@Bhupinderisnice3 жыл бұрын
Where from I can buy all this stuff all plugs and wires .. I want to connect pioneer as well .. I am in Finland give me all websites or store’s link .. please
@shamazuddin3 жыл бұрын
I got it all from dynamicsounds.co.uk All in the video description. Ps pioneer does not stay on with the key in auxiliary, so I switched to a Alpine with has the option to stay on, it works with the same leads
@kathrynkennedy-pollitt9731 Жыл бұрын
What harness did you use?
@shamazuddin Жыл бұрын
It is in the description
@AChill6z3 жыл бұрын
I can't find the can-bus with the proximity sensors anywhere. Can somebody help me please ?
@AnselmO.. Жыл бұрын
I've find it.. on my City in europe..
@AChill6z11 ай бұрын
@@AnselmO..Can I get more informations ?
@AnselmO..11 ай бұрын
What infos you need? I think if you find some online shop from europe, you can buy the canbus easily..
@scarletred19273 жыл бұрын
And what about the installing process???😔😑😐
@shamazuddin3 жыл бұрын
Hi it is basically all plug in quite easy
@scarletred19273 жыл бұрын
@@shamazuddin 😂😂😂😂
@scarletred19273 жыл бұрын
It does not matter how easy or not it is, is not showing in the video. Is like watching a video of how to change a flat tire and just show the car with a tire replaced already, after all is "quite simple" you just unscrew and screw back 🤣🤣🤣🤣
@leonperry12310 ай бұрын
@@scarletred1927 the description doest say how to install the radio. just says "upgrade".
@nabilriahi40192 жыл бұрын
That radio has Bluetooth but doesn't work all the time just press source button and find it on your phone under the name "peugeot "
@recon3392 жыл бұрын
I have the issue that all my Bluetooth settings are gray or blurred out so I can't edit the Bluetooth settings