Peugeot 308 - Seat belt chime fault - Part 1

[@Stephbess1]

Hi, have you posted part 2 yet? Cheers

[@joaoeperfeito]

Can you unplugg the cable without taking off all sensor?

[@okaoka248]

Read my comment

[@dutchcourier35t38]

Hello can i ask you how you disassembled the bench? I have a 308 SW but I can't get the back seat out. I also see a kind of tilt support in the seat, but so far no success. yours sincerely. Martin.

[@Justfixitmate]

kzbin.infoOG-e7PEGsXA

[@craigroberts5542]

Do you know why the passenger seat red dot doesn’t illuminate

[@Justfixitmate]

The passenger light illuminates once there is a passenger in the seat, then clears when the seat belt is clicked in.

[@leftyspinn]

Ive got one where 1 back seat alarm beeps. Do you think its the seat sensor that you soldered?

[@Justfixitmate]

Quite possibly, you could try swapping some of the rear seats around to see if that makes any difference. Over the past weeks I've been pulling apart a set of sensors/unit to hopefully find the root cause of issues with these things... Keep an eye out for a new video in the near future.

[@ifwayi6544]

Where’s part 2?

[@Justfixitmate]

@@ifwayi6544 About a week away, pretty sure I've worked out what's going on with these things... watch this space.

[@siar2119]

If i take the cable under the Seat complety out will it Go away?

[@muriz2011]

Nah it wont,I did it and its still there

[@okaoka248]

I solved the problem. There holes where chairs locks. The spring allow the "plugs" To go too deep. I put washer where 18mm hole to each and now thing seems to be solved. When putting chair back in to holes it did not lock well but I managed.

[@heileryoelromerobateca366]

La parte 2 😢

[@Billjack1234]

0:01