Peugeot/Citroen BCM Fault / Lights not working / Wipers and Light wont stop

Peugeot Citroen BCM Fault Lights not working Wipers and Light wont stop bsi fix reset repair partner

[@aok5298]

Bro, I learnt absolutely nothing from watching that

[@dannys7795]

yes another useless video.

[@MadmanCar]

Bro then don't look

[@MrRGM10]

Does this model have bsi?​@@MadmanCar

[@MadmanCar]

Hello no its bcm module @@MrRGM10

[@VSW2706]

From 1.00 to 1.30 what is it that you are trying to say? Is that the bad fusebox or the new fuse box? Is that how you check if its working or is that how you check if it is faulty?

[@iboHonda]

Hello mr. I have the same problem so i have to change BCM ? will problem fix?

[@mohamedhamza2368]

Hello, i have citroen c4 grand picasso 2014, i have a problem with the left low light it doesn't work even if i switch the lamp.

[@JK_Garage_]

Sveiks. Atsūti epastu.

[@bluntinstrument6070]

Interesting shots of a computer tablet, the dash board and the ground but, I learned nothing from this video

[@tim36332]

My wipers and lights wont turn off on my C3 Mk2 (2012). I have replaced the body control from under the bonnet, but it did not fix the problem, the wipers are still going. Does the other BCM under the dash need replacing too?

[@MrRGM10]

My friend has that issue under the dashboard its called bsi

[@tim36332]

@@MrRGM10 the problem here was a large yellow cable attachment underneath the trim directly below the wipers. It was simply not clicked together properly. The wipers are working perfectly now.

[@mikey9512]

Does the BCM need reprogramming to the car ? Or can it be a straight swap with no programming needed ?

[@MadmanCar]

no need reprogramming

[@user-sb9tp9lm7p]

I have similar problem on my Peugeot 308 hdi 2011 but all lights working except side light those two elemented bulbs in with h1 and spot lights bottom of front bumper. I have taken to so many garages all tested fuses, wires, but can not find the problem what causing it not to light up, even tried radio option menu+ activate or deactivate daytime running light still not working rest the lights working fine Any idea what could it be

[@user-sb9tp9lm7p]

I don't think my problem is in the board everything working as should other than sidelight/daytime running lights whatever called. Last auto technician said when he tested bulb holders earth ok, bulbs ok, wires ok but no power to holder

[@sweenydeeny5821]

Fella redo the video and put a few words in , it dosent have to be fully comprehensive with all the whistles and bells , 🔔 go on i dare ya ,as i can see you know fully what your doing

[@fallko76]

did it need programming/coding, or just a simple install new part?

[@MadmanCar]

Hello. no need programming

[@martinquinlivan448]

Im having same problem. Wat do i do to fix ot? Change fuse board???

[@MadmanCar]

Hello yes

[@MrRGM10]

If bsi change do we need reprogramming? I know bsm you dont need

[@MadmanCar]

Hello. no need

[@MrRGM10]

​@MadmanCar t.y. is it bcm fault if wiper and interior lights and sometimes memory seat not working? Mine is 508 though car is confusing with this kind of design

[@MadmanCar]

Hello. sory bsi need programming bcm no need programming

[@PichouIsquoi]

Hello my friend, please can you send me the file for opening the think diag old version device subscription, I want to open the subscription via st link, and I do not have the file

[@willdatsun]

you know you can talk on videos right, to explain things?

[@ivangeorgiev8724]

Can't actually see what you are doing and no explanation so the video is not much of a help