Great video - you've given that brake system another 40 years of life !
@Pexyz2 жыл бұрын
Yes I hope so 👍👌 //Peter
@bobanofat25853 жыл бұрын
just what the doctor ordered as i just bought a '56 190 :)
@Pexyz3 жыл бұрын
Thanks Boba! Congratulations to your 190! Will we see it here on YT?
@bobanofat25853 жыл бұрын
@@Pexyz - have not thought about it, but i might show it off once i get it road worthy. =)
@Pexyz3 жыл бұрын
@@bobanofat2585 Would be nice to see. Good luck with the project! //Peter
@bobanofat25853 жыл бұрын
@@Pexyz - will be bleeding the brakes tomorrow . . been waiting ages for parts, but finally they are installed - lets hope the master cylinder is up to par. was hoping to find a bleed video from you ;)
@Pexyz3 жыл бұрын
@@bobanofat2585 Sorry, my video is delayed, but will come. Hope you managed to fix the bleeding anyway. //Peter
@mikemuller43763 жыл бұрын
And again...wonderful work !!!
@Pexyz3 жыл бұрын
Thanks Mike 👌👍😊
@lanissaben7805Ай бұрын
Bonjour Monsieur, Je voudrais comprendre pourquoi Vous faites tourner la roue plusieurs fois ? Quel réglage faites-vous exactement ? Je voudrais comprendre que faut il faire exactement ? Thanks for aide.
@Pexyz17 күн бұрын
Bonjour! Je tourne la roue pour pouvoir régler le roulement de roue. Je serre d'abord l'écrou du roulement pour que la roue se bloque presque et arrête de tourner. Je desserre ensuite l'écrou juste assez pour que la roue tourne facilement mais sans jeu dans le roulement de roue. J'espère que cela pourra vous aider ! Merci pour votre question et d'avoir regardé mes vidéos ! //Peter 👍👍😀😀
@johna11608 ай бұрын
My favorite kind of how-to "movie". Loved it when you flipped the switch on the boom box. Regrettably, vast majority of YT DIY video producers think we need to see their face (often way too much of) and listen to them drone on and on with unnecessary verbiage accompanied by annoying music. 19:04 Your bench grinder sounds like a two stroke engine!
@Pexyz6 ай бұрын
Thanks, I'm glad you like it! 😃👍
@anderssimonson14313 жыл бұрын
#41 was realy nice to Watch. After this l might work some with my old Opel. Not the same brand but the tech is pretty much the same. Keep up the good work Pexyz
@Pexyz3 жыл бұрын
Thanks Anders! Good luck with you Opel (and well done). It will soon be on the road👍😊👌 .
@nidalghazal18903 жыл бұрын
Very nicely detailed video i like it
@Pexyz3 жыл бұрын
Thanks! Very nice to hear //Peter
@MC-xf8uu6 ай бұрын
Gracias por compartir, tendrías que pasarme donde comprar las refacciones, saludos!!!
@АНТИКИДИМИТРОВ6 ай бұрын
Very good video and explanation. Where did you buy the brake cylinders?
@ibrahimrasheed1873 жыл бұрын
Very nice work, also you have good taste in cars peter , maybe you should get a w116 to complete the collection.
@Pexyz3 жыл бұрын
Thank you Ibrahim! It's hard not to like these old cars, as I'm sure you know 🙄. A W116, yes why not. I've never had one so maybe it's time 😁✌ //Peter
@ibrahimrasheed1873 жыл бұрын
I wish you the best.
@aliozgoren70353 жыл бұрын
Hi good man Pexyz, do you have also a film about repairing the gear shift, i can not put the reverse gear.
@Pexyz3 жыл бұрын
Thanks Ali! I will post a video on gearbox and gear linkage later on. Maybe you have problems with worn bushings on the linkage. //Peter
@elinwahin3328 Жыл бұрын
HI how did you adjust brakes shoes the friction washer and adjusting sleeves
@dimi9112 жыл бұрын
Thanks for posting. Do you have any more detailed videos about removing the brake cylinders?
@Pexyz2 жыл бұрын
Hi and thanks for watching! No, sorry, I don't, but it's pretty straight forward once you have removed the drums and the brake shoes 👌👍 Greetings from Peter
@dimi9112 жыл бұрын
@@Pexyz no worries, thanks. Look fwd to more great repair videos on the old Merc!
@ianplatt5607 Жыл бұрын
For the 280E, M-B specify the _amount_ (by weight) of grease that should be in the hub. Do they do that for the Ponton?
@Pexyz Жыл бұрын
I don't know, maybe they do, but I think I'm okay for this one 👍
@MC-xf8uu6 ай бұрын
Serán los mismos frenos para el mercedes w111 ? El mío nunca los he limpiado desde hace más de 20 años
@kenrasponce2163 жыл бұрын
I can thank you enough.
@Pexyz3 жыл бұрын
Thank you 👍
@lakshminarasimhan2106 Жыл бұрын
I have a190d pontoon 1959 please let me know where to source the parts for the same
@Pexyz Жыл бұрын
Contact www.mercedesdelar.se 👍. You can write him in english. This guy can find almost anything. //Peter
@Pexyz Жыл бұрын
@lakshminarasimhan2106 Bye the way, in which country are you? //Peter
@andreaguazza38072 жыл бұрын
Salve una domanda, ma a fini collezionistici è meglio la versione con motore diesel o benzina? Grazie
@Pexyz2 жыл бұрын
That's hard to say Andrea. I guess it's a matter of opinion. I prefer petrol engines myself and I think there are more models to choose from if you go for the petrol ones. 👌 Greetings //Peter
@abderrahimmark3 жыл бұрын
Long time no see
@Pexyz3 жыл бұрын
Yes, but it's soon on the road now 😁 /Peter
@trevangillette34822 жыл бұрын
Where did you get new seals for the cylinders?
@Pexyz2 жыл бұрын
Hi Trevan, I got them from one of my suppliers. Do you need these seals? I might be able to help you. Greetings //Peter
@mikko2788 Жыл бұрын
Lite snack och mycket verkstad 😉
@Pexyz Жыл бұрын
Tackar! 👌👌😀😀
@heruhadianmudjenan7126 Жыл бұрын
Is it fit m119 engine?
@Pexyz Жыл бұрын
Oh no, it has the original 4-cyl M136 engine, introduced in 1935 🙂
@ianplatt5607 Жыл бұрын
You didn’t treat the inner brake dust covers! They get hammered by the weather. Clean, spray with rust converter (to make sure any rust remaining is ‘dealt with’, paint, _then_ rebuild the hub. You lose points for that, Penyz! 😠 (I can say this coz I’ve just replaced (what was left of) my dust covers on my ‘74 280E. 😉)
@Pexyz Жыл бұрын
You can always find ways to do things differently or more thorough. I'm not here to gain points. Just working on my cars and enjoying them 😁👍. Congrats to a -74 280 E! I also have one, but a -73 👌