PFAFF VARIMATIC 6085 SERVICE

PFAFF assembly tuning cleaning lubrication work and sewing our e-mail [e-mail] . Don't forget to click "Subscribe" so you don't miss any of the next shots! relaxed greetings our e-mail [e-mail] #SEWING MACHINES##SERVICE#

[@kiwi_kirsch]

THANK YOU!!!!! i do have THIS EXACT machine and had it at the workshop recently, for the first time after a span of eleven years of regular hobby use. i knew nothing was broken, yet dry and dirty and few things suffered from dried lube. seeing you clean it with that paintbrush is EXACTLY what i would love to do every now and the, THANK YOU for showing me how easy it it to open it in terms of where to start and what, where.. 0_0 amazing!!! THANK YOU!!!!!

[@kiwi_kirsch]

my account here on youtube is a watch-only one, yet i just added banner and profile picture and about - whereas i, for the first time, noticed i do have one subscriber - YOU!! aaaw!!! thank you, that "1 subscriber" looks soooo funny :D

[@PierreDole]

Thank you. This was very helpful. Someone asked me to maintain his sewing machine (this one), but I never used one, much less disassembled one. Now he got back a cleaned and oiled machine.

[@InJenuity1]

Not only did this video show me how to take apart my machine but it also has wicked background music.

[@stephanies.6760]

I cannot follow. I don't understand how the they take of the cover in the first few seconds. 😏

[@atomicskull6405]

Oiling the head parts on the 6091 is much more of a nightmare than with this due to all the extra moving parts packed in there for the dual feed. Otherwise it's the same machine. When I got mine it was frozen up with hardened white grease and all that had to be cleaned out. I replaced it with Super Lube (which does not harden like that). Triflow grease also works but I like Super Lube because it has a plastics and elastomers compatibility list (it can be used with basically everything but polycarbonate and natural rubber) The way I like to oil is apply a drop turn the machine by hand a few times then use a microfiber cloth or q-tip to remove any excess oil that's still on the outside of the rotating part.

[@MaryGrafstrom-i7k]

I acidenily removed my needle plat and it is impossible to put back on. I see you took it off but didn't show putting it back on.

[@davidyoung4859]

Great video! I have a 6091 with a dead motor. Are they difficult to remove and put a new one in?

[@sewingmachines6369]

hello, the engine is easy to change. thanks

[@shopooakgood9188]

hello thank you for an amazing video. Is there a way to center the needle position on this machine. Mine veers slightly to the left. thank you

[@sewingmachines6369]

on the head itself, from a bird's eye view, you can see 2 nuts or 2 ibus, rotation to the left,pozzzzz

[@shopooakgood9188]

@@sewingmachines6369 thank you. Have you tried to take the hand wheel off? I’m wondering if it is a reverse feed screw. Mine won’t budge. Thanks again.

[@MrMscontroller]

@@sewingmachines6369 could you explain with more detail. Where are the nuts? I have the same issue with my machine. Could you make a video?

[@marinaloaiza1699]

Es una belleza de máquina y para trabajo pesado es increíble.

[@kathylim7292]

Hi , my sewing machine is stuck and it’s really really difficult to turn the wheel. What do I need to do?

[@sewingmachines6369]

clean the gripper so that the thread passes through

[@nuzhatyasmeen5271]

Great video. May i ak how to adjust the needle postion that is gone toward the left. Thanks

[@sewingmachines6369]

there is an ibus or nut that moves .under the bulb pozzzzz

[@hannahgu3100]

My pfaff tiptronic 1069 pressure bar lifter not working, it can't lift the foot up and down, could you help me please! Many thanks.

[@sewingmachines6369]

greetings, spray yourself with the vd spray, to the depth of the needle, and it will be ok

[@hannahgu3100]

@@sewingmachines6369 Thank you very much for your reply, I will try it.

[@samuelezanuso981]

hello! do you have spare parts for this machine?

[@emiliansspavideos1734]

Hello, I have set the upper tension on my sewing machine to the highest level, but loops are still forming. Can you help me, please.

[@sewingmachines6369]

Hi, I can. Simply tighten the bottom piece. There's a screw on the piece. Where did you put the coil, and the upper one give way

[@emiliansspavideos1734]

Thank you

[@simelaxatzistavrou9211]

Καλησπέρα εχω θέμα με το ποδαράκι δεν κατεβαίνει τελείως

[@Dosto007]

Merci

[@marinaloaiza1699]

Tengo una PAFF 955hobbymatic y no e podido coseguir quien me la arregle. Choca la aguja contra el cangrejo. Medio la arreglaron pero quedó cociendo al revés.

[@sewingmachines6369]

El PFAFF 955 es una gran máquina porque el teclado en el comando selecciona el programa.

[@nimmiragavan8290]

No check of the bobbin winding mechanism.

[@atomicskull6405]

TBF not much can go wrong with the bobbin winder on the 6085 / 6091.

[@el5inco129]

👍👍🇲🇽

[@simelaxatzistavrou9211]

Πώς μπορώ να το ρυθμίσω;

[@shirleymilner7869]

1471