Philips PerfectCare Aqua GC8622 steam generator Easy De-Calc and deep cleaning - EN

  Рет қаралды 20,973

OCDaddy_Zsolt

OCDaddy_Zsolt

Күн бұрын

Пікірлер: 12
@OCDaddyZsolt
@OCDaddyZsolt Жыл бұрын
For discounts and further information, read the video’s description.
@kerestecioglu
@kerestecioglu Ай бұрын
My philips perfect care steam iron always turns the de-calc light on and draining lime water doesn't solve the issue. I think lime is stuck inside of pipes etc. What should I do to solve the calc problem? I do not want to throw away the steam iron.
@OCDaddyZsolt
@OCDaddyZsolt Ай бұрын
You might need to run the de-calc cycle a few times, until all the limescale is gone. Also try to use deionized or distilled water, to avoid limescale.
@bpotato3310
@bpotato3310 Ай бұрын
hello can ypou help. My philips inside became to mossy because i keep the water inside too long. I mean when i fill the water, im not removeing the water inside just refill it (mix with old water) and now it was so dirty and look moldy
@OCDaddyZsolt
@OCDaddyZsolt Ай бұрын
Hi, I would say, you need to use some descaler, fill it up completely, let it sit for some time to work and then run it through, as most likely the pipes are also full of cr.p. You shouldn't use tap water, but deionized, or distilled water.
@TheChaylaq
@TheChaylaq 4 ай бұрын
Hello, I use the same iron. But the lime valve of my iron does not open, the lime has not been cleaned for a long time, the valve does not turn at all. Do you have any suggestions for a solution to this issue?
@OCDaddyZsolt
@OCDaddyZsolt 4 ай бұрын
Hi, you definitely try to do it when it is completely cold? If yes, most likely it has "rotten" inside. Most likely you would need to apply higher force, use some tools to gain more grip/force, or before, you could try to run through a couple of rounds of descaler, to see if that could help to loosen it up from the inside.
@TheChaylaq
@TheChaylaq 4 ай бұрын
@@OCDaddyZsolt yes the iron is totaly cold, and yes I just tried it to open with a towel and pincers, however the valve got broken :/ I will bring it to the service.. thx anyway
@hirasami4259
@hirasami4259 6 ай бұрын
Which powder use for cleaning
@OCDaddyZsolt
@OCDaddyZsolt 6 ай бұрын
It was a Tenzi descaler powder. But any descaler should do the trick.
@mitchellesakina8953
@mitchellesakina8953 5 ай бұрын
baking soda works?
@OCDaddyZsolt
@OCDaddyZsolt 5 ай бұрын
@@mitchellesakina8953 Never tried baking soda for this purpose. Maybe “lemon acid” would be a good alternative.
Farmer narrowly escapes tiger attack
00:20
CTV News
Рет қаралды 12 МЛН
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 9 МЛН
Lack of steam from your iron? Secret tip to fix it
7:11
Traderweb
Рет қаралды 157 М.
Why the steam generator does not produce steam.
30:49
Ryszard Muła
Рет қаралды 63 М.
19 Ingenious Home Hacks You’ll Wish You Knew Sooner
15:54
DIY Sweet
Рет қаралды 11 М.
Using the Phillips Steam Generator GC9630
9:28
Ibrahim Rahman
Рет қаралды 41 М.