Scheppach DP55 710W Bench Pillar Drill (Tool Review)

Рет қаралды 16,892

Күн бұрын

Пікірлер: 50

@PhillWyattProjects Жыл бұрын

Amazon UK Link to Scheppach DP55 710W Bench Drill: amzn.to/3vv6VJR * As an Amazon Associate I earn from qualifying purchases. Thank you.

@karlpopewoodcraft Жыл бұрын

I'm looking at this, so perfect timing.

@PhillWyattProjects Жыл бұрын

Yea Karl it's alright I think. Better than I was expecting. It doesn't feel premium although it seems to do the job just fine and for the money it performs as expected I think. I'm not a fan of keyless chucks on drill presses so this one fits the bill for me.

@karlpopewoodcraft Жыл бұрын

@PhillWyattProjects I use the scheppach thicknesser and that's been great so far. I've just seen this on offer for 138 pounds, What did you pay if you don't mind me asking?

@PhillWyattProjects Жыл бұрын

@@karlpopewoodcraftYea Karl I got mine from Robert Dyas for £137.69. it's still at that price currently. Delivery was free too. 👍🏻

@karlpopewoodcraft Жыл бұрын

@PhillWyattProjects I didn't expect you too miss out on a good offer mate 🤣

@PhillWyattProjects Жыл бұрын

@@karlpopewoodcraftI do like a deal 😆

@shaun30-3-mg9zs Жыл бұрын

Hi Phill, Great video on your new pillar drill plenty of power and well demonstrated and you made a drill bit rack, as always a good honest review and a great video Take care👍

@PhillWyattProjects Жыл бұрын

Cheers Shaun 👍🏻 I had been meaning to make a rack for the bits glad it's all done now.

@owen12352 Жыл бұрын

that is a nice thing for the drill bits

@PhillWyattProjects Жыл бұрын

Thanks Owen it's all much more organised now which is good.

@tinkeringtaylor3053 Жыл бұрын

Does seem to be a good bit of kit, and you have done a really good review and demonstration 👍

@PhillWyattProjects Жыл бұрын

Thanks mate 👍🏻

@owen12352 Жыл бұрын

hi phill looks like a good tool

@PhillWyattProjects Жыл бұрын

Yea I'm pleasantly surprised with it. Quite good I think.

@andyc972 Жыл бұрын

Thanks Phill, interesting to see a more in depth review for this machine. I've seen mixed views on the drill especially regarding drilling metals and accuracy, but it looked fine in your review and it seems it should be OK for most DIY workshop use. TBH there is a similar drill from Bosch which is much more expensive and still has mixed reviews, I think a lot comes down to your expectations of a DIY machine !

@karlpopewoodcraft Жыл бұрын

Hi Andy I suspect the drill bits people are using are influencing their opinion as well. I have a small silverline drill press very budget indeed but when I use famag drill bits it will cut through iron wood like butter. I think this scheppach drill look a good contender against the Bosch.

@PhillWyattProjects Жыл бұрын

Hi Andy 👍🏻 yes and I think it also comes down to luck. I think I got a good one straight out of the box. I'm not always so lucky when buying a new tool. With this one they seem to have simplified it and revised issues that the earlier models had even though it is the cheapest one they do I think it's decent. I was looking at the Bosch model although it's almost double the price of this one so that put me off a bit.

@PhillWyattProjects Жыл бұрын

@@karlpopewoodcraftits a good point about the drill bits Karl. The quality varies a lot. Always worth experimenting with different brands.

@andyc972 Жыл бұрын

Thanks Karl, I appreciate the feedback !@@karlpopewoodcraft

@andyc972 Жыл бұрын

Yep, we all need a bit of luck !@@PhillWyattProjects

@rickikilvi5406 3 ай бұрын

To check the rotary shaft for sloppy bearings, just fit a 10mm drill bit. Grab point of drill and try to move it left / right front / back.

@PhillWyattProjects 3 ай бұрын

Thanks for the info!

@sparkfishes 5 ай бұрын

Nice video . I have just bought one to replace my Wolf bench pillar drill high was belt driven. As others have mentioned, the handle is awful I can't imagine what was in the designers mind. The handle does work OK but it is just weired. The spring loaded spigot on the chuck key is a very good idea from a safety perspective ( it prevents you leaving the key inplace) however, it makes it very fiddly put the key in and keep it there when tightening the chuck. A really good addition would have been somewhere to keep the key when not in use! The work piece clamp is very goods but there is no way to drill holes other than perpendicular ..separate tables allow the table to moved through 90 deg from the horizontal ; this drill can not do this. The instructions are very poor and it took me hours to work out how to set the depth stops. I would have preferred a digital read out for the depth travel and I Think the 60 model has this like the Bosch machine. It is quite and the electronic speed control is a boon over the old belt system. It is a big irreverent over the old type machines

@PhillWyattProjects 5 ай бұрын

@@sparkfishes thank you. I think I agree with everything you mentioned.

@mikismarques83 10 ай бұрын

Excelente vídeo! 👌🏻

@PhillWyattProjects 10 ай бұрын

Thanks! 👍

@steveclark2996 10 ай бұрын

If you hold the end of the drill bit when mounted in the chuck and wobble it, is there much play?

@PhillWyattProjects 10 ай бұрын

No not on mine. It's good. I think I was lucky with mine.

@tantanflingueur9646 8 ай бұрын

Merci pour ces explications que j'ai trouvé utile car je l'ai acheté y a quelques semaines. 👍🏼

@PhillWyattProjects 8 ай бұрын

Merci!

@900themarco 7 ай бұрын

Bonsoir @tantanflingueur9646. Qu'en pensez vous aujourd'hui après quelques semaines d'utilisation ?

@FatNormanCoathanger 7 ай бұрын

Knowing the distance between the shaft and the centre of the chuck would be helpful.

@2logj Жыл бұрын

Hi Phil thanks.what is the cost and where can I buy apart from Amazon

@PhillWyattProjects Жыл бұрын

Hi, I bought mine from Robert Dyas for £137.69 on sale at the moment. You can also get it from Scheppach Direct which sells online and on eBay. Hope this helps 👍🏻

@denios36 7 ай бұрын

Any chance this drill could make a ~50mm hole saw work on 18mm plywood? The equivalent Parkside drill failed miserably.

@tommyaleks100 4 ай бұрын

I have drilled a 76mm hole with a holesaw but take it slow, very slow, it get`s hot if you not carefull.

@penttijakonen3817 7 ай бұрын

The DP60 has a huge feature over this, it has 2 gears. Unless you can get DP55 ridiculously cheap and need it only for very light drilling, I would (and did) absolutely get DP60 instead.

@Stu81 6 ай бұрын

The extra price isn't worth the lower rpm speed for wood working, still the same max rpm but unless you do a lot of metal work it's a pointless feature, it doesn't offer any more drilling capacity both are 280mm chuck to base.

@penttijakonen3817 6 ай бұрын

@@Stu81 If it's useless for you, okay. I completely disagree, unless the situation is what I described earlier.

@Stu81 6 ай бұрын

@@penttijakonen3817 out of interest what has 1st gear done for you that makes it so valuable?

@roberthossack286 3 ай бұрын

@@Stu81 sweet FA

@stuartstokes5930 Ай бұрын

I agree with @penttijakonen3817 if you do much drilling in steel. I have the DP55 and it lacks the torque to drill steel over 6.5 mm diameter at correct feed and speed. With larger drill bits and slower speeds (500-700rpm), if you apply enough downward pressure to cut an acceptable feed rate then the speed slows and pulses in bursts as the machine tries to compensate. It's anything but a smooth process and quite disappointing. I really wish I'd bought the model with the 2 speed box for the greater available torque. If only used used as a wood working drill however, then this problem doesn't show up and it works quite well.

@IFATours 9 ай бұрын

Habe mir die Bohrmaschine angeschafft und kann nur sagen, sehr enttäuschend. Nach noch nicht einmal 10 Bohrungen, gab die Maschine den Geist auf. Zuerst ruckliger Motorlauf, dann Stillstand. Auf dem Display konnte man alle möglichen Drehzahlen einstellen, aber die Maschine lief nicht mehr an. Weiteres Manko, Bohrer mit 1mm Durchmesser lassen sich nicht fest einspannen. Laser zum Markieren des Bohrloches, zeigt nicht die Mitte an, sondern 1cm daneben. Schwergängiges Heben und Senken der Maschine.

@kougerat5388 2 ай бұрын

Thanks that's good to know👍