HOW TO MAKE A CUSTOM BUMPER [PART 2]

[@kirtonvincent]

You did an amazing job bro what matters is that you learn from that . Mistakes are not bad it only makes you better .

[@accordfreak1]

That's the worst, when you spend so much time on a project and it doesn't turn out the way you wanted it. At least you learned from it.

[@IncognitoSprax]

Part of the life as an artist. Every failure is something to learn from.

[@Joking_Matter]

Don't beat yourself up about it! You did more than what most can do!

[@cttopcop]

What you are trying to do isn’t easy! I give you a lot of credit for getting in there and going for it. That is how you learn! I’m doing a truck project with my son and we have no idea what we are doing but we are learning together! Keep at it! I’m subscribed now to you and can’t wait to watch you progress! You are doing great young man!

[@mrblunts3300]

use clear tape next time and mold release

[@animeprincess3938]

Honestly i feel you, I used to repair and make custom bumpers and the first week i was so frustrated i felt like quiting because every order was sent back to me, all the Brackets, weld and bondo had to be 100% Perfect, but i promise i also made mistakes but i got better and so will you

[@PhilWithSuper]

Thank you so much. It's definitely super frustrating, but I took a week off without even touching the car, so now I'm ready to go back and give it another shot.

[@sefan1317]

You’ll have it ready by summer. You’ve just got to keep pushing. I get your mad at the car, yourself, things not going right but that’s the beauty in making something yourself. If you want an exact replica, buy the part. But since you’ve come this far I say keep going. Add your own element to make it different while looking how you want. If you let this stop you it’s going to be so much harder to start again. Don’t let it get you down. Keep moving and trying new things. You’ve got this! Can’t wait to see what you come up with!

[@PhilWithSuper]

Thank you so much for the encouragement, it means so much to me

[@Johnnykwik082]

I love the way the the driver side center support really kicks off the Asymmetrics

[@kenneth46k]

How did you join that old bumper with your new design

[@Doahs770studios]

next time when you start filling the pin holes and seam streakes etc.. switch to a light compound body filler and do away with the glazen puddy,, it will make a big differance in the overall time in re filling because what was happening is that red puddy pops out once the sander heated it up and shrank it ,, then try a heavy fill type primer,, good luck and great job i like the look ,,

[@H.W.A209]

This is a helpful video , I can’t wait to see the outcome , you got this bro 💯💯

[@paulwinters4383]

With all this time and effort you have put in dont give up now just take a step back for a bit and go back to it you will get they in the end

[@PhilWithSuper]

Thank you for the encouragement man

[@That1CanadianGuy]

At 4:24, that is the face of defeat. Been there many times myself. Keep yer head up bud, you can do it!

[@lonniesunkle4818]

You did a killer attempt.keep on going you're going to get it.your a true American you will prevail

[@mrblunts3300]

dont give up man i made a bumper before on my instagram

[@jelle8754]

what's your instagram?

[@PhilWithSuper]

That's awesome man!

[@mrblunts3300]

@@jelle8754 it's mrblunts

[@flyingRich]

thanks for sharing!

[@chrisadams8126]

And that is what you call gaining experience, I do auto body for a living. In my opinion you need to bolt it completely to the car, make sure it is level cut it apart use a cardboard template on the side you like and use it as a Guage for the other side then there is no way it can be different

[@1ton_mayhem]

Your bumper is crooked, still better than what I could do

[@PhilWithSuper]

You can do it man! If I could then I'm 100% sure you could lol

[@dominicgarcia85]

Filler primer wet sand but you’ll figure it out it takes longer but experience is best tool

[@pairsnpaint]

I had similar problems when making custom side scoopr for my Fiero. Just tell people you got it from Duraflex.

[@fwtszm]

Not bad from my view, would have loved to see the end product

[@jimfranklin2377]

Is your garage floor level ??

[@karldarien4405]

Your builds ara amazing bro

[@JOEGGGJOE]

Shit happens man. Cut & reshape. Make it even. Get some 4x4, put them under the bumper that it will sit level and flat.

[@eggs6628]

I see this man’s pain

[@TheBiz-uw9wo]

Maybe it's four years late to say this but you could have trimmed down one of the posts that come from the main bumper to the attachment

[@ohdatsjoseph]

I seen that taquito box, those things are goooooood

[@PhilWithSuper]

For real haha

[@brianrussell1565]

Sounds like me no matter what you do something happens not right

[@gtools9137]

Hard to know where to start but I don't think you realized the scope of the work you were undertaking. Probably good experience of what not to do next time. No1 is that you cant join fiberglass directly to a plastic bumper. It is a huge amount of work to do this correctly so just take it as a learning experience and move on.

[@Regulators0001]

Prime then fix with more filler. It's not a waste it's learing process

[@jasijasim1261]

dude good broo

[@jdmdragons3977]

We are doing a zed build and ya always come across mistakes. the effort is great mate & to be honest a easy fix but just longer to get done.

[@jemailclinton3519]

Dude these things happen I have one I'm working on put your big boy pants on and fix it you have the skill and the talent you are so close KEEP FUCKING GOING DONT YOU FUCKING QUIT

[@negao-pj4cl]

Primeiro

[@oh5148]

muñeñoo

[@maccracken6842]

Looks good otherwise.

[@nickatchison]

That's uneven as fuck

[@brianrussell1565]

Get a new bumper

[@aserodriguez1425]

Depressing

[@StrongFreeLovin]

You talk and worry too much, just cut it off, adjust it and put it together. I hope you didn't give up.