Physics Working Model || MUTUAL INDUCTION || WIRELESS Power transmit || MUST WATCH

[@TalenTCasuaL]

your fav. scene 03:00 share your thoughts : ) 💕💖😀

[@myschool9259]

Hello sir , pls reply me 🙏🙏 Sir I have made this but it's not working I have used bc 547 and 2N2222A transistor and 20 k and 27k resistor But in both cases it's not working pls tell me 😢😢 I have to submit it on 3 oct

[@TalenTCasuaL]

Hello dear 💕 Don't worry it will work Connect on Instagram @talentcasual_side

[@myschool9259]

@@TalenTCasuaLsir I'm not on Instagram , I have telegram only

[@myschool9259]

@@TalenTCasuaL sir I m not on Instagram

[@TalenTCasuaL]

Ok dear 💕 how can we connect on telegram

[@a5m7a32]

Will the LED glow if I just twist the wire of secondary coil around its ends?

[@captaingaming3716]

Don't know 😊

[@captaingaming3716]

Try it can

[@TalenTCasuaL]

Yes dear 💕 Make sure u twist around 10-12 times tightly follow the circuit diagram Any help contact on insta @talentcasual_side

[@venkatyokashkaruppiah3097]

sir the copper wire you have mentioned is not enameled wire, is that okay to use?

[@TalenTCasuaL]

Let me. Check

[@TalenTCasuaL]

No dear sorry that's not the right material Now Let me change the link This wire is not enammled and hence not insulated this will not work Sorry dear 💕

[@TalenTCasuaL]

bro the link is updated and here u can buy 2 of them if they are not enough so thats why : ) thanks for commenting 💕🥰

[@venkatyokashkaruppiah3097]

How much wire is needed for the whole project

[@TalenTCasuaL]

@venkatyokashkaruppiah3097 told u u need to make 32-32 turns Each that's it 🥰 May be it's nearly 15-18 m

[@abhinandanbhobharia5524]

What if thickness of wire is more than this ,,,and what about radius of loop????

[@TalenTCasuaL]

Yes dear 💕 This is called geometry It depends on each factor If thickness is more it needs more coils and more current If radius is shorter than it needs even more coil turns May be work when we bring it to close Or radios is bigger can work from little farther and ( also need more coils)

[@Salmabanu_]

What kind of questions do teachers ask in science exhibition?? Plzz answer me sir

[@Salmabanu_]

And I actually made this project it works good..... But I need some questions about this bcz if teachers ask me questions..... And I am in 8th STD so plzz answer me cuz I have to show demo tomorrow

[@TalenTCasuaL]

Ohk dear 💕 I have same answers to other comments let me copy paste 🥰

[@TalenTCasuaL]

yes dear What is use of transistor principle of working why using enamaled or insulated wire what is battery voltages what is minimum voltage required ? use of resistance? Where it is used uses etc etc

[@Salmabanu_]

Okay...

[@Salmabanu_]

If u don't mind, r u a phone addicted 😂🤣, Bcz u always answers to comments quick sooo ... 🤗🤗😉☺️,

[@certain1916]

Thankyou for resolving my doubts you are awesome 😎👍

[@TalenTCasuaL]

🤗 you're welcome dear 💕

[@certain1916]

My transistor is heating up very much what to do ? I have used 23k resistor and 2n2222a transistor

[@TalenTCasuaL]

If model is working great If not try reversing the transistor

[@certain1916]

​@@TalenTCasuaL Like changing the connection from 1st pin to 3rd, I did but now the transistor is burnt up I think

[@certain1916]

I have to buy new one, should i buy 33k resistor or what, And i have one more doubt my radius is small around 3 cm, with 30 turns each is this also a problem kindly help me 🙏

[@TalenTCasuaL]

No dear 💕 don't worry try it

[@TalenTCasuaL]

Yes dear 💕 Diameter should be 6 CM which is ok Resistance u can take 27k

[@SofiaAmarantaGoglia]

what is the function of making that loop in the primary coil in 1:14min ??

[@dd4khufia547]

Is there any specific no. of coils in it? Actually I have been trying it for 8 days but it never became successful.

[@TalenTCasuaL]

Yes dear 💕 32-32 coils

[@dd4khufia547]

@@TalenTCasuaL ok bro 👍

[@dd4khufia547]

@@TalenTCasuaL And one more question I have used Bjt BC547 transistor, 33 kilo ohm resistor and a 9 volt battery Will it work properly or I have to change the transistor or resistor?

[@some_random_chess_games]

Sir, did you attached the led with resistor of 2k as mentioned or without it ?

[@aidenjoseph4781]

jgdyg

[@taraaa06]

sir, what is the use of transistor and will the experiment work if we donot add any transistor? also thank you for this beautiful project 😊

[@TalenTCasuaL]

Hello dear 💕 Transistor Acts as switch and rapidly turn the current on off on off hundreds time in a sec And this produce change of current thus chnge of magnetic field and further change of magnetic flux Which produce current in 2nd coil 🥰

[@taraaa06]

oh thankss

[@bearrx_child11]

Can we find these components specifically transistor and resistor at electronics or hardware shop?

[@TalenTCasuaL]

Sure at any electricals shop not hardware but electronics speaker motor repair etc go explore market and get knowledge that's also part of making models

[@bestcreationbyafreen_912]

Sir. How do u explain this project with the hand shows? Bcz have to explain in our school(science exhibition) so plzz explain it briefly.....

[@auric_vibes_]

Sir aapne 2 coils.banaye to un dono coils ki total length kitni hogi?

[@TalenTCasuaL]

Hello dear 💕 Ek coil me 32 baar lpetna hai mtlb 32 turns And same. 2nd me bhi To ek ki length approx 6 m hogi Total 12m But aap zada hi leke ana 15-18m

[@auric_vibes_]

​@@TalenTCasuaLthank you so much sir. Sir by the way iss project ke liye can i use 2N 2222a transistor (metal) or 574B transistor (plastic) , 30k ohm resistor?

[@auric_vibes_]

And sir isme transistor and resistor ko hum without soldering iron use kare wires ko bend karke kar skate h na?

[@TalenTCasuaL]

2n 2222a but try both dear 💕 And yes 30k

[@TalenTCasuaL]

As your wish I will say solder 🥰

[@ritikathakur2048]

If same transistor is not available so... what transistor should we use .

[@TalenTCasuaL]

Dear 💕 u can use 2n 2222a but both are commely available For more help and FAQs Connect on @talentcasual_side Insta 🥰

[@COCOMELONNNNNNNNNN-q3v]

Thanks for the amazing tutorial! Helped me ace my practicals

[@TalenTCasuaL]

Great 🥰

[@ChatGPExplains]

My bulb is glowing dim on 30 30 so what happen if I remove resistir

[@TalenTCasuaL]

Let the resistance lower And try to add more turns or remove turns Or use smaller led Thanks for commenting🥰

[@ChatGPExplains]

@@TalenTCasuaL Thankyou for your assistance man, you helped me a lot..... God gives you everything what you want........

[@TalenTCasuaL]

Awwww so sweet ❤ Most welcome buddy (✿❛◡❛) Same to u ❤

[@rajupoppy9746]

i ordederd 2n2222a transistor but 2n222 came so can i use 2n2222 with 27k resistor ?

[@TalenTCasuaL]

It's all about experiment Give it a try may it works 🥰🥰

[@sidartha8656]

Sir,your uploaded video was very helpful in making of my project.I am giving boards this year.Sir can you tell me some viva related questions to this project? 🙏🙏

[@taraaa06]

ur g

[@TalenTCasuaL]

yes dear use of transistor principle of working why using enamaled or insulated wire what is battery voltages what is minimum voltage required use of resistance etc

[@sidartha8656]

@@TalenTCasuaL Thank you very much for answering the question sir. 🙏

[@TalenTCasuaL]

youre welcome : )

[@vishalinisingh9236]

Sir, are you scratching the loop while connecting them after the cut in primary coil...??plzz answer it..?

[@TalenTCasuaL]

Hello dear 💕 Thanks for commenting I don't understand your questions dear 💕 Kindly connect on insta @talentcasual_side I will surely help u out Thanks ❤

[@vishalinisingh9236]

@@TalenTCasuaL sir by using 33k resistance can I make the project working...?? The transistor is heating very fastly, is there anything I can do..? And plzz tell me how much time I can use it continuously..?

[@TalenTCasuaL]

@vishalinisingh9236 Yes dear 💕 and yes that's good transistor normally heat ❤ If not working try reverse the transistor Any help u can Connect on Instagram @talentcasual_side

[@ranvijaysinghrajput8541]

Is there be any difference agar ..dono coil ka wire alag alag ho ..means thickness

[@TalenTCasuaL]

yes thora sa chal jayega turns 36-40 kr dena

[@anjalipatwal8192]

Can I use another wire instead of this for coil ?

[@TalenTCasuaL]

No dear 💕. Works only in copper insulated wire Go to nearby sounds speaker repair shop U will get it 🥰 Otherwise purchase ready made from description 🥰

[@dheerajsingh2870]

Hey how do you connected switch ... With which wire

[@TalenTCasuaL]

So sorry for late reply Dear 💕 Connect switch To positive wire Cut the wire and connect both ends of switch to both cut wires 🥰 Means let the current pass through switch 🥰 Thanks for commenting (✿❛◡❛)

[@dheerajsingh2870]

@@TalenTCasuaL battery k postive wire se?

[@TalenTCasuaL]

Yes bro 🥰 Watch my latest video I made it live 😘

[@dheerajsingh2870]

@@TalenTCasuaL it's discription

[@TalenTCasuaL]

Wh@t dear?

[@PadmaPreethika]

Sir i have used 27k resistor and same transistor used in video but the diameter is of 4.5cm and turns are 30 each but led is not glowing

[@TalenTCasuaL]

First fix the diameter to 6cm diameter atleast And if not work Try reversing the transistor

[@inspiring_minds.]

Bro please tell is it important to apply switch ??? Please tell

[@TalenTCasuaL]

Yes dear 💕 Compulsory Without switch battery will drain out And transistor will burn 🔥

[@Methelegend124]

🎉🎉🎉very beautiful sir this project helped me a lot thank you soo much❤❤❤

[@TalenTCasuaL]

Thanks dear 💕 🥰🥰🥰

[@anya-lm2ib]

I had ordered mine from amazon, 2 weeks ago and it worked well on the very first day of its arrival but isn't working now. Kindly help.

[@TalenTCasuaL]

Paste products link here dear 💕 🥰 Than i will check..

[@anya-lm2ib]

I hope you've received the link as it's not showing to me

[@TalenTCasuaL]

What u have ordered dear 💕 ? I don't receive any link U plz paste the link of the product here or u purchased something from. My video description? 🥰

[@tanmeetkaur6116]

Why we use transistor in this??pls pls reply..

[@TalenTCasuaL]

I have replied same to other comments dear 💕 u can check And I reply u later in 2 hours Thanks ❤

[@Realcubing]

Can we use aluminium coil?

[@TalenTCasuaL]

No dear : ) Only copper coil which should be insulated : ) Any help u can reach me at insta @talentcasual_side 🥰

[@eagleaddulive6612]

Bro can you clear my dought abt thisss 1. Agr coil p1 coil me 12 or S1 coil me 24 turns ho to? 2. Coil wire me agr knot ho to? Is it circuit works?

[@TalenTCasuaL]

Hello dear 💕 ☺ nice question 1 - 24 turns ho to radius chota krlo make small rings and use 25-27k resistance 2- Knot or bend will reduce its working but it will still work - avoid knots (✿❛◡❛)

[@muskanarora4973]

Thanku for the video 💫🙌 it helps me a lot for my practical exam.....

[@TalenTCasuaL]

Aww so. Sweet ❤ thanks a lot dear 💕🥰 Your welcome (✿❛◡❛) Stay tuned upcoming content is really. Great And share your ideas or videos that u want me. To make 🥰🥰 And FOLLOW Or catch on insta @talentcasual_side 🤗

[@muskanarora4973]

@@TalenTCasuaL sure ❤️

[@TalenTCasuaL]

@talentcasual_side

[@muskanarora4973]

@@TalenTCasuaL I am not on instagram handle

[@TalenTCasuaL]

Okz dear 💕

[@sanyamverma1753]

What I can do if my transistor heat up while using 27k resistance.... One another thing how we know that transistor is working without multimeter....last thing i can also use 3.7 volt battery in this project.....

[@TalenTCasuaL]

no dear u cannot use 3.7 volt it needs 9v or even 9+9 = 18 v If transistor is working thats why its getting heaten up using 27k resistance trannsistor is heaeting thats normal if the project is working dont use it for continous 1-2 min just use to show for some time and if not working u can do - try reverse the transistor may it will work or add 5 k resistance or replace resistance with 32-33k any and use 9 v battery dear : ) sorr y for late reply : )

[@sanyamverma1753]

Can I use 3.7 volt battery by reducing the value of resistance....?

[@amith8330]

​@@sanyamverma1753 reduce the value of resistance as well as the number of coils and also the the diameter, that must do it

[@TalenTCasuaL]

No dear 💕

[@kookyfoe9871]

Why around 30k resistance required is this because of some limitations or drawbacks please specify sir

[@TalenTCasuaL]

Dear 💕 Transistor stores the current and released very fast hundreds of time each second rapidly This will eventually burn out the transistor And to avoid this and limit the current

[@kookyfoe9871]

@@TalenTCasuaL ok

[@vandnachaudhary5816]

Agar mujhe ishse bada rkhna h base to coil ki turn bhi badani pdegi.....????

[@TalenTCasuaL]

No dear 💕 it will work But agr jada bda krna hai toh Apko 35-35 turns or thora size bda krna hoga 🤗 Thanks for commenting ❤ Stay tuned (✿❛◡❛) Insta @talentcasual_side catch up

[@vandnachaudhary5816]

@@TalenTCasuaL okay thanks a lot🥰...

[@TalenTCasuaL]

So sweet 💕 Most welcome dear 🥰

[@Intellectual_Me]

Whatsthe púrpóse of transitor here? Also tell me the current produce in secondary coíls is alternating or direct??

[@TalenTCasuaL]

Hello dear 💕 It's direct current And transistor rapidly turns on off the current hundreds of time which change the magnetic field thus flux and vice versa happen in other coil

[@Intellectual_Me]

@@TalenTCasuaL thnkyouu..

[@deviritesh738]

Whats the Thickness of copper wire ?

[@TalenTCasuaL]

0.03 mm dear Check Link in the description Purchase all required materials

[@deviritesh738]

@@TalenTCasuaL thanks for the information. 🥰🥰💖 But I am from Nepal so I won't order it online.😅

[@TalenTCasuaL]

Oh from nepal ❤❤ Am from Punjab 🥰 Thanks for watching (✿❛◡❛)

[@annayandas3089]

Why u used resisor..?

[@TalenTCasuaL]

Nice question dear 💕 Yes resistance is to restrict the flow of current But here it is used to control the amount of current to not to exceed more that this transistor can bear If we don't use resistance transistor will burn out over heat due to overflow of current voltage ⚡️ And current is like water... Transistor is like valve which we open then water flows But if too much water will flow than this valve break out So for this there is smal tap ( resistance) Now this happens becos transistor store current and release many time in a sec So it will rapidly increasing current And will burn out soon So resistance controls the amount Like Transistor increase the current Resistance again downs it Transistor increase resistance downs it This process works 100 of times in a sec (✿❛◡❛) Thanks for commenting Support real content ❤

[@hardeepsingh9451]

Whats the use of transistor in this circuit.....can we make this without using this?

[@TalenTCasuaL]

No dear 💕 transistor is compulsory Transistor releases the current in pulses First it stores the potential Then. Release it in pulses of very high power Which induce electromagnetic field in COPPER COIL. and which further induce current in 2nd coil

[@MagicMotionIN]

Can i use BC547 transistor if i can ,which resistor should i use for that?

[@TalenTCasuaL]

22-27k Or 32k

[@hamayounzafar2837]

I read in book that current will induce in secondary coil when number of magnetic lines of forces are changing.But here in video when you stop moving the secondary coil current was still inducing in it.Can you help me to understand it?

[@TalenTCasuaL]

This is bcoz the transistor turns on and off the current hundreds time each second and that produces Each time current changes on and off there ja change in magnetic flux due to change in magnetic field due to change in current rapidly And when magnetic flux rapidly changes vice versa happens in 2nd coil And current is induced 🥰🥰

[@pranavburad8190]

@@TalenTCasuaL THANK YOU SO MUCH BRO

[@TalenTCasuaL]

Great to have a Learning mind and curious comment 🥰 gd luck 🍀

[@ceddyyy]

Can I use a thicker coil (#26) using the same value of components (resistance)? If yes, do I need to change the number of turns?

[@TalenTCasuaL]

Yes dear turns will increase 40-45 may be

[@ceddyyy]

May I know what will happen if I stick with 32 turns using the thicker coil?

[@TalenTCasuaL]

Led will not glow just a little din light... And transistor would heat too much Otherwise - use more coil more turns and on both coils primary coil 40-45 2° coil 35-40 turns And if transister heats reverse it Thanks ❤

[@ceddyyy]

Why does the transistor heat up? Is there any way to fix that?

[@TalenTCasuaL]

If the model. Is working perfectly than it's ok just don't use for too long 30-40 sec alright If the model is not working Try to reverse the transistor than check 🥰

[@VinayPrakash-x1e]

I have made project by using BC547 and 1k ohm but led is not turning on . What can be tha reason? ( 40 turns)

[@TalenTCasuaL]

Dear 💕 It needs 27k resistance for u or 33k if... Trannsistor is ctpn 2222a easily available everywhere Still not working after 27k May be reverse the tranisistor

[@kIWIIIIIII-vq3yz]

how to join transistor and resistor without soldering iron..?

[@TalenTCasuaL]

use wire and remove wire olastic coating and wrap the wire 10-15 times and putt tape o it : )

[@kIWIIIIIII-vq3yz]

@@TalenTCasuaL can i use the copper wire after removing the insulation from whole?

[@TalenTCasuaL]

No dear 💕 only the edges where we have to connect it to others 😋

[@kIWIIIIIII-vq3yz]

yes? or no? @@TalenTCasuaL

[@TalenTCasuaL]

Where u need to connect the copper wire u have to remove the insulation yesss...... 🥰 Not full wire But where u want to pass the current the ends

[@maitysneha8871]

Which transistor have you used for making this project? I mean what is its unit or magnitude?

[@TalenTCasuaL]

Transistor name - CTPN 2222N

[@maitysneha8871]

@@TalenTCasuaL Thank you so much for replying!

[@TalenTCasuaL]

🥰 Connect on Instagram @talentcasual_side

[@mukuldutt5449]

Bro on which principal it works

[@TalenTCasuaL]

Helo dear 💕 Watch my latest video about this... U will get more detail about principle It work's on the principle of mutual induction Which may define as When there is a change in the current in the Primary coil there is current induced in the Secondary coil placed parallel to it This happens becos of magnetic flux ( large no. Of magnetic field lines ) Which are produced on primary Coil due to potential applied And which are parallel to secondary coil So which induce current in secondary coil So a transistor with a suitable resistance Give a high amount of current voltage in pulses Which means current come. Stop come stop Thus Changes rapidly And magnetic flux changes rapidly So the Current in 2ndary coil is induced rapidly 🥰 Thansk for commenting🥰 (✿❛◡❛) Stay tuned Subscribe

[@anushkasingh1383]

Can you tell me have you also add led with resistor?

[@TalenTCasuaL]

No dear 💕 direct ❤

[@anushkasingh1383]

@@TalenTCasuaL then why it's not working?

[@anushkasingh1383]

@@TalenTCasuaL I have put every single thing as same as you but it's not working 🤧

[@TalenTCasuaL]

Don't worry Dear 💕 It will work Connect on Instagram @talentcasual_side 🥰

[@anushkasingh1383]

@@TalenTCasuaL actually I don't use Instagram so..

[@AV_Editz04]

Can thick copper wire will work or not ?

[@TalenTCasuaL]

Yes it will work u need 2 batteries and copper should not be very thick : ) make more turns with atleast 3 CM diametet

[@Mohammad__tabish__]

Hello sir, Can you please tell me the name of this model. Mutual inductance is just a phenomenon. I have made this model and want to write a project report on it.

[@TalenTCasuaL]

Name Mutua Induction or Wire Less Power Transmission Aim Principle Diagram Construction Working Precautions Results

[@mr.unknown18]

Can you explain how can you add the switch pls

[@TalenTCasuaL]

Yes dear... One more detail. Video about this is coming on live making. 😘🥰 So stay tuned I just added the switch on negative wire U can also add on positive wire There are 2 wires from battery 🔋 Cut any wire ,u got two ends and add switch Connect these 2 ends on the switch So the current flow through the switch And u can. ON AND OFF Thanks 😘🥰 hope i got it answered

[@mr.unknown18]

@@TalenTCasuaL thanks a lot .....

[@TalenTCasuaL]

Aww so sweet (✿❛◡❛) Your welcome

[@m.k.barathdass]

Sir In this experiment the transistor getting too heat how to rectify this problem, so that the led light cannot glow

[@TalenTCasuaL]

What is the problem Detect yourself Check every part Check cirtuit diagram First make a circuit diagram Then Verify check batteryband transistor Check copper wire is insulated or not Thanks u ❤

[@AleeshaZameer-lw1kq]

Primary coil mai jo 3 ends hai un teeno me insulation khatm karni hai ya sirf ek me...??? Urgent please reply

[@TalenTCasuaL]

Hi dear 💕 remove every insulation where current has to pass Yes all 3 , to make it conducting

[@AleeshaZameer-lw1kq]

Humne same material use kiya hai or sab same procedure follow kiya....but wo kaam nhi kr rha hai.....kya reason ho skta hai ??

[@TalenTCasuaL]

Hello dear 💕 I can help u Msg on Instagram @talentcasual_side Thanks for commenting ❤ (✿❛◡❛)

[@nikitakullu9055]

Can I use a 22k resistance for 2n 2222a transistor instead of 30k

[@TalenTCasuaL]

Yes dear u can add 4-5k resistance in series sum up wil be 27k that gonna work

[@nikitakullu9055]

My transistor is is heating up...how to reverse it?

[@TalenTCasuaL]

May be your project is working led is glowing if it's ( 3V) And if not U can try reverse the trannsistor Join it's 3rd end at first and first end at 3rd Centre leg remains same 🥰

[@nikitakullu9055]

Thank you so much❤......now my model is working

[@TalenTCasuaL]

Wow great dear 💕❤

[@haseebsatti1063]

Can we use enamelled voil of 0.6-0.7 mm

[@TalenTCasuaL]

Yes 0.3 mn

[@mythicboy237]

will 0.5mm same transistor 33k resistor 9v battery work

[@TalenTCasuaL]

Yes dear 💕 it will work but take thinner wire Otherwise take more and more coil turns 50-55 primary and 35-40 2nd°

[@mythicboy237]

okk thanks

[@joon_holics6351]

Sir i have 27k and 33k resistors which is better to use

[@TalenTCasuaL]

Try both dear one by one 27k first

[@joon_holics6351]

Yes sir

[@TalenTCasuaL]

Hello dear 💕 When u try with 27k If not work Than reverse the transistor and again try 🥰🥰 same for 33k

[@joon_holics6351]

Yes sir, is it ok to use these resistor with 547 transistor

[@TalenTCasuaL]

No dear 💕 But u can try Ctpn 2222a are widely used and easily available transistor

[@toxff17]

I used the transistor 22n222a 1764 and not working.which one i use which not heat quick

[@TalenTCasuaL]

Hello dear 💕 Try Reverse the transistor Or chNge it to 2222a CTPN

[@studyclasses3437]

Bhaiya jldi se help kr do pls ap bta skte hai ki apne transistor kyu use kiya hai...i need your bhaiya pls bta do

[@TalenTCasuaL]

so so sorry for late reply dear 💖 Transistor is used to send the current in pulses (on -off- on -off ) and whenever the current changes in primary coil there is induced current in secondary coil due to magnetic flux which is produced due to current in primary coil : ) and Transistor continuously changes current and there is continuous induced current in 2ndary coil : ) and bulb keeps glowing thanks for commenting dear Other copying me on KZbin are fake and dont know anything

[@studyclasses3437]

thanks bro but mera paper ho gya... ap late ho gye...😔

[@TalenTCasuaL]

Ooh am sorry dear 💕 Kesa huaa?

[@studyclasses3437]

Thik hi hua...sir ne explanation nahi phuchi... isliye bch gya

[@TalenTCasuaL]

😂😂

[@greatxd3063]

what is the power of transistor you used

[@TalenTCasuaL]

Name 2n 2222a dear💕

[@a5m7a32]

How did you fuse resistor with the base of the transistor?

[@TalenTCasuaL]

Using soldering iron dear 💕 If u dont have it u can simply use a wire remove ita insulation and take the pure brown copper wire out And simple tie it up on the resistance and transitoe joint make a knot and it will work Or use black tape ( but may not work)

[@TalenTCasuaL]

Also u can use plier to twist both legs transitor and resistance legs into each other like 2 normal wirrs

[@USindhujaCRollno]

Hi bro.... Can you please tell where the switch has to be connect

[@TalenTCasuaL]

The two wires coming out of battery connect on any one ... Make the wire pass through the switch and it will on /off

[@NISHAYADAV-gn9tn]

Will it work if radii is around 1cm ... even though if we maintain the number of turns ? Bhaiya wire mehengi hai 🥲

[@TalenTCasuaL]

No dear atleast it should be 2 inches 🥰🥰

[@TalenTCasuaL]

Number turn can. Be minimum 20 turns

[@jasleen_011]

Do you have any write up for this investigatory project

[@TalenTCasuaL]

Hello dear 💕 Thanks for commenting Connect on Instagram @talentcasual_side

[@antivirus7964]

Can we use more than one led???

[@TalenTCasuaL]

NO DEAR FOR 2 LEDS u need to put 3 batteries And 150 coil turns + 50k resist and i dont know bigger Transistor 🥰 thanks

[@antivirus7964]

@@TalenTCasuaL ok thanku

[@ucgamingzone7996]

Why you cut tha loop i don't understand please clarify me

[@TalenTCasuaL]

Dear at the centre of the coil ( it has 32 turns so at the 16-17 turn) I made a loop and cut. It so basically there is 2 coils in first. Coil now it has centre end First end 2nd end and the middle one is there now which. Is used to connect battery positive so the positive current. Flows in the middle and get to both first and last end So just to enter the positive current inside the first coil Dear 💕

[@nithenbains]

Hlo sir my led qmwork when it is connected to battery but when connected with coil and attach to battery doesn't work

[@TalenTCasuaL]

Hello dear 💕 I didn't understand you point Can you explain breifly in detail : )

[@nithenbains]

@@TalenTCasuaL Please Reply sir 🤔🤔🤔 sir in secondary coil i have attach the bulb and then connected to battery and the bulb glow too dim but when too check bulb glowing properly i attached it to battery it glow very well but in coil bulb glows too dim Thats why when i bring secondary coil to the primary coil bulb do not glow

[@TalenTCasuaL]

Hmm i really don't understand what you saying Msg on Instagram @talentcasual_side

[@amanchaudhary6605]

Bro can you please share a pdf or something about this project like a brief explaination of what's going on in the working model please...

[@TalenTCasuaL]

Yes bro sure : ) U can seach on google i will tell u brief soon dear 💕

[@amanchaudhary6605]

@@TalenTCasuaL thanks so much

[@TalenTCasuaL]

Dear this is called mutual induction means when bring closer the primary copper coils induce current to the secondary How - there is circuit with transistor - in the primary coil - the transistor turns the current on and off rapidly ( it stores the current and then release thus increasing the power) it will gradually get burn out so there is a resistance to avoid this ok 👌 So this is circuit which rapidly hundreds of time Continuesly turns the current on and off in the primary coil Now the secondady coil - where current induced and bulb glows How ( principle) - there is rule ' when there is current in copper coil there magnetic field is produced and here is a magnetic flux in the field And vice versa when 2nd coil is closer to the first coil - magnetic field induce current in the 2nd coil For a very short period of time because... Next rule ( principles) - current is induced in 2nd coil only when there is change in magnetic flux in the 1st coil. So due to rapid change in magnetic flux due to rapis change in current in the first coil ( transistor turns on off on off) Hence there is continues mutual induction Which wire less power transmission Ok hope it helps. Good. Luck 🤞🍀 dear 💕

[@venkatyokashkaruppiah3097]

can i buy and use that copper wire u mentioned in your description for this project

[@TalenTCasuaL]

Yes sir make sure it's length is perfect and enough

[@venkatyokashkaruppiah3097]

@@TalenTCasuaL the copper wire you have suggested is without enameled ,is that ok ?will it from electromagnetic feild ?

[@TalenTCasuaL]

It must be insulated bro Check is it is insulated and also take enough length to make 32-32 turns each 🥰

[@Cric_shorts0007]

Primary coil aor secondary coil dono me alag alag thickness ka wire le sakte hai

[@TalenTCasuaL]

Jada frk na ho to le skte hai bhai 🥰

[@Cric_shorts0007]

Ek hi battery Leni hai na

[@TalenTCasuaL]

Yes take 2 incase 2 need or one down

[@Unknown-e1n2l]

Wire should be 25 guage right?

[@TalenTCasuaL]

Yes dear 25-30

[@chanchalverma5133]

If we use 547 B transistor.....then which value of resistor we will use....??

[@TalenTCasuaL]

May be 22k Or 25k

[@chanchalverma5133]

Thanku....

[@TalenTCasuaL]

Did it work?

[@chanchalverma5133]

No it's does not work...

[@chanchalverma5133]

If the transistor heat up ......then also the led does not glow...???

[@dj_rahulvlogs]

If transistor is heating then which transistor should we use..??

[@TalenTCasuaL]

Dear first of all Reverse the transsistor If it is heating may be circuit is wrong Thanks Use 24-27-29-33 k any which work for your coil

[@toxff17]

​@@TalenTCasuaLreverse the transisitor means

[@AnTrapToo]

Bhai is this mutual induction or electromagnetic induction?

[@TalenTCasuaL]

Mutual induction dear 💕

[@ippilisitharamphysics9544]

Sir , Cooper wire 27 gauge 1m used in mutual induction

[@TalenTCasuaL]

30-30 rounds I don't know length Sorry 🥰

[@aseefbrnawi8640]

how the circuit work with DC supply can you explain plz

[@TalenTCasuaL]

Yes dear 💕 I have answered same thing in other comments to u can check latest comments And see 👀 Thanks ❤ dear 💕

[@rf3w]

Is using 0.35 mm wire okay?

[@TalenTCasuaL]

Yes dear Wire should not be very thin And should not be very think Just as shown medium like thread

[@rf3w]

@@TalenTCasuaLokay will try again, my previous attempt failed I think because of low number of turns. Thank you!

[@TalenTCasuaL]

@rf3w don't worry dear try again

[@nikitasingh_18]

I made the same circuit but i replaced the transistor with ST9013 transistor it’s not working how can i make it work with that transistor please tell

[@TalenTCasuaL]

No dear 💕 U need to test with resistance 22k to 35k May one of them. Work Also check with 2 batteries connected in parallel Otherwise Try the transistor - CTPN 2222A 🥰 Thanks

[@Purple_shade_hoodie]

Sir, i tried it but it is not working, i got 0.37mm of wire, could you Please guide?

[@TalenTCasuaL]

Hello dear 💕 Use exactly same materials Try to reverse the transistor may be u have put transistor in opposite direction

[@Purple_shade_hoodie]

@TalenTCasuaL it's not working

[@TalenTCasuaL]

@Purple_shade_hoodie msg on insta @talentcasual_side

[@Purple_shade_hoodie]

@TalenTCasual Thankyou so much! The project is amazing!!

[@iameshitasingh]

Hlo bro help me mujse ni bnra ye model can u explain me this.....kese bnega???

[@TalenTCasuaL]

Yes dear 💕 Dont worry 😊 Connect on Instagram @talentcasual And msg any time I will solve your problem And I helped over 30+ makers

[@legendscodm4269]

Sir it is not working for me. Should I increase the number of coils? 30gauge wire I hv I have removed insulation on all end of the coil properly. I think there is a problem with the number of coils or with the resistor because the transistor is getting really very hot within seconds kf turning on the switch

[@legendscodm4269]

I figured out the problem with the transistor its fine now. But do I need to do something with the coils???

[@TalenTCasuaL]

Transistor gets heat its normal check if it's working 😘 And if not reverse the transistor No coil. Problem

[@legendscodm4269]

Sir i reversed transistor it still not working. I have a 30 gauge wire. Exactly how many coils do I need for primary and secondary loop?

[@TalenTCasuaL]

Dear 32-32 are enough 🥰

[@TalenTCasuaL]

Connect on Instagram @talentcasual_side Let's sort it

[@Cric_shorts0007]

First coil ke tino end E1 E2 of L ko blade se scrub karna hai kya

[@TalenTCasuaL]

Yes dear 💕 Remove it's insulation (✿❛◡❛)

[@MagicMotionIN]

What is the voltage of led?

[@TalenTCasuaL]

Ask politely

[@MagicMotionIN]

@@TalenTCasuaL can u please tell me the voltage of LED used?

[@TalenTCasuaL]

Led is 3 V dear 💕 U can use 2v Or 3v any 🥰 God bless u

[@udbhavpant2680]

Can we use 2N2222A trasistor

[@TalenTCasuaL]

Sure But CTPN 2222a is working fine

[@SimbaDoggoDiaries]

Can i use this in my magnetism and its magnetic effect project And is it compulsory to add resortor Please reply ass soon as possible

[@SimbaDoggoDiaries]

Reply as soon as possible

[@TalenTCasuaL]

Hello dear 💕 All materials are compulsor Magnetism and magnetic effect project?? Which class dear 💕 @talentcasual_side on insta 🥰 Let's connect dm me

[@SimbaDoggoDiaries]

Class 12

[@SimbaDoggoDiaries]

​@@TalenTCasuaLclass 12

[@TalenTCasuaL]

Ok dear 💕 Well this is your wish dear It's Electro Magnetic Induction And magnetism and magnetic effect is a different thing But u can make it 🥰

[@rajlaxmi4917]

Sir plz tell material required?

[@TalenTCasuaL]

Hello dear 💕 Msg on Instagram @talentcasual_side Sorry for late reply 🥰

[@gungun8113]

How switch is connected?

[@gungun8113]

Please tell me

[@TalenTCasuaL]

Hello dear 💕 Switch connected is simple On The negative or postive wire any one Just make it pass through the switch Like The battery has 2 wire + and - Take any wire and connect it to one end of switch and take wire from the other end of switch and the wire is connected further Switch will work ☺☺ Hope u understand U can connect on Instagram at any time @talentcasual_side 🥰 i will. Surely help u ❤

[@TalenTCasuaL]

Yes dear 💕 Just make the wire pass through the switch Switch has tow ends ( terminals) Connect the negative wire on one end and connect a new wire to 2nd end So the current has to pass through the switch and switch will. Work 🥰 on or off

[@gungun8113]

Thank you☺️. And congratulations you have found a new subscriber .

[@TalenTCasuaL]

Ohh wow that's superb dear 💕 Thanks so much for commenting And hope u connect on Instagram And share your models pics 🥰🥰 @talentcasual_side Thanks ❤

[@RahulYadav-jr5wx]

Can you please tell me which wire use I means kitni thin ya kitni thick wire leni h please reply please reply please reply

[@TalenTCasuaL]

Hello dear 💕 Apko insulated copper wire leni hai Brownish color ki 33 gauge 0.3 mm Normally thread jesi Agr thori hard ho but easily foldable ho like a normal thin wire toh bhi chl jayegi dont worry Bs apko turns jada lagane hoge 🥰 Thanks Speaker repair shop Fan repair shop Pr apko mil jayegi 50-100 ki 🥰

[@monasharma750]

How did you connect battery to button

[@TalenTCasuaL]

Hello dear 💕 Connect battery positive wire yo switch and 2nd wire from switch to cool loop Simply make the current go through switch - cut the red ( positive wire) into half You got 2 ends Connect these 2 ends to switch Or Watch my latest video dear 💕 About MUTUAL INDUCTION live making U will understand Connect on insta- @talentcasual_side

[@eagleaddulive6612]

Bhai transistor or resistance shop prr mil hi nhi rha???😭🤌 Ki krun??

[@TalenTCasuaL]

Hlo bro Electric store pr jau Wholesale wali Jaha led wies circle battery speakers Smaan milta ho Apko mil jayega thora dhoondne se And u can purchase from Video Description - materials required or Ready made model or I can. Make for u Contact insta @talentcasual_side 🥰(✿❛◡❛)

[@gorgeous-rd2gy]

Is one battery enough?

[@TalenTCasuaL]

Yes but u can try 2 if not working

[@anjalipatwal8192]

Sometimes it's not working Properly why.?? How can I solve this problem

[@TalenTCasuaL]

Check your switch and wirs connection May be some wire is tickling

[@VaishuSK]

How you connected the switch ??

[@TalenTCasuaL]

Check circuit diagram dear 💕 Or connect it to any wire from battery positive or negative 🥰🥰 Just a On Off switch Thanks for commenting

[@D.soni3252]

How much this project cost??

[@TalenTCasuaL]

Msg on Instagram @talentcasual_side : )

[@D.soni3252]

@@TalenTCasuaL I am not on social media 🙃

[@TalenTCasuaL]

KZbin is also a social Media dear 💕 Anyways Install Instagram make account And msg on @talentcasual_side Thanks ❤

[@JeevanKOK]

Salute for you Literally bro replied to everyone 👏👏👏

[@TalenTCasuaL]

🥰🥰🥰😊😊😊😊😊 feeling so great after this lovely awaited !! Comment Thanks bro Not only replied But gave so much time to them on insta Untill their models worked properly. Without any charge

[@legendscodm4269]

is it ok if i dont use transistor and 30k resistor?

[@TalenTCasuaL]

No dear 💕 It's compulsory

[@legendscodm4269]

@@TalenTCasuaL also, I have a 29 gauge wire. How many loops would I need for the first and second coil?

[@TalenTCasuaL]

32-32

[@legendscodm4269]

@@TalenTCasuaL Thank you sooooooooooooooooo muchhhhhhhhhhhhhhhhhhhhhh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@TalenTCasuaL]

🥰🥰🥰🥰😚welcome

[@grencymunjapara6691]

can i use 25 gauge copper wire? please tell me

[@TalenTCasuaL]

Yes dear💕

[@grencymunjapara6691]

But it's not working I don't know what's the problem please help me I want to bring it to hostel in 3 days

[@TalenTCasuaL]

Come in instagram dear 💕 @talentcasual_side And i will help u : )

[@grencymunjapara6691]

👋 hey

[@TalenTCasuaL]

Yes

[@Salmabanu_]

🤗Sir what are the advantages and disadvantages of mutual induction?? In brief pleaseeeee😀😊

[@TalenTCasuaL]

Go with internet dear 💕 never knew about that ❤

[@SurakshaBhardwaj-j8s]

Hlo sir ..... Sir mere us coil me deakat aa rahe hai jisme LED laga hua hai .... Bina wire ke chal rahe hai but jab usko wire ke sath connect kar rahe hu toh ... Voh bhait kaam glow kar rahe hai voh bhi thode thode.... Please tell sir

[@TalenTCasuaL]

Hello dear 💕 Try with 2 batteries Jo LED hai voh 3v honi chaiye ok Copper coil 30-32 turns kro And transistor same lgao Thanke

[@SurakshaBhardwaj-j8s]

@@TalenTCasuaL oky sir let me try this one..... Or jab Mane copper wire ko silver banaya matlab uska brown prt hata deya toh voh bhaut patle ho gaye or na mere wire ka silver prt aya ..... Or jab usme bulb attach kar rahe hu toh voh jag mag hoo Raha hai

[@Mrigendra7734]

I have followed the procedure but it's not working i used 22k resistor

[@TalenTCasuaL]

Don't worry dear 💕 Connect on Instagram @talentcasual_side I can help u

[@Mrigendra7734]

@@TalenTCasuaL are u lucky Mehra?

[@TalenTCasuaL]

@Mrigendra7734 yes dear 💕

[@IrisPark-wu3ks]

Can you please tell the role of switch in this? Cuz as far as I know mutual induction works when a coil is moving towards another coil which have changing magnetic flux. PLEASE REPLY ME IT'S URGENT! 😭🙏🏼

[@TalenTCasuaL]

Hello dear 💕 Switch is connected. To. Battery and it just on and off the circuit Connect on. Instagram @talentcasual_side for. Details Thanks

[@kIWIIIIIII-vq3yz]

did u remove the resistance from led in secondary coil??

[@TalenTCasuaL]

Secondary coil is directly connected to led

[@TalenTCasuaL]

And remove insulation

[@sekarkt]

Can i use 36guz copper wire

[@TalenTCasuaL]

Yes dear 💕

[@zubairarain48]

How to join the button with battery?

[@TalenTCasuaL]

Hello sir Take any wire negative or positive from battery and make it pass through the switch as shown in circuit diagram Step 1 cut the wire ( any one) Step 2 join both cut ends to both switch terminals And now current is passing through switch on or off 🥰🥰 Hope it helped