how to make wireless power transfer project || Science project

#wireless #power #transfer #wirelesspowertransfer #tesla
Business inquires
E-mail : [e-mail]
Connect With Skynet Robotics
Facebook: / skynetroboticspage
Instagram: / skynetrobotics
For Ready Made Electronics projects Message me on WhatsApp
[phone]
WARNING:
This video is for demonstration and education purpose only. Each demonstration presents risk and hazards that must be fully understood before attempting. And should be performed only by professionals.
By Skynet Robotics #skynetrobotics
Avinash Sonawane
In this video tutorial of wireless power transfer project you will learn how to make wireless power transmission.
wireless power transfer is trending science project.People always search how to make wireless energy transfer project on Internet.
wireless power transmission used in smartphone wireless charging.
To make wireless power transmission project you need following components.
0.5mm Enameled copper wire
(You can use 0.3 to 0.6mm wire)
2N2222A transistor
22K to 28K resistor
LED
9V battery with cap
To make wireless power transfer system for different divices this video is very useful.wireless project is award winning school project. My Next video topic is how to make wireless charger or wireless power transfer system.
wireless power transmission invented by nikola tesla. Tesla coil is example of wireless power
transfer system.
#scienceproject #scienceexperiments

[@paulojosefisica]

simple experiments electromagnetic induction Thank you very much my friend for sharing, it helped me in my classes with my students

[@SS15395]

Supeb, made with much finishing.

[@skynet-robotics]

Thank you! Cheers!

[@Saren_Motor]

Good

[@milandecor4241]

Thanks bro

[@nargisrangooni2569]

Thank you soo much dude it's working thankss

[@skynet-robotics]

Enjoy

[@SM.Ghamdi]

it work thx :)

[@Aryan_gupta_156]

Bhai first comment and veiwer

[@Chheavang]

What other transistors can we use to replace the one shown in the video?

[@Nothing-qm9ov]

Bro, if I made 30 coils in both copper wires will it work, what will be the length for total copper wire to be perchased from shop

[@ronofour]

What other tool can I use to connect the transistor with the copper wire?

[@gyanwalve1499]

Nice

[@sujatascakeandart9048]

Kya 0.5 mm ka copper wire lagega... Usse kam mm ka nahi hoga?

[@Sushiladevi-mx2lh]

Thanks Bhaiii ❤ Aapki Video Ki Wajh se Mera Complete Ho Gyaa Kyunki Mai 1 galti kr raha thaaa😅

[@skynet-robotics]

👍

[@GammaRayBoi]

Kya galti thi Mera baan nahi raha😢plz tell me kya pata meri bhi wahi galti ho

[@PrinsipeSonwane]

Haa batana bhai kya galti kri aapne

[@PrinsipeSonwane]

Haa batana bhai kya galti kri aap e

[@PrinsipeSonwane]

Haa batana bhai kya galti kri aapne

[@relixix5593]

What is the substance you used for joining the LED with thw wire

[@skynet-robotics]

It's soldering

[@alocin110]

Dear friend this is not wireless transmission but wirless electromagnetic induction. There is no capacitors in either set, transmitter and receiver. The natural resonance frequency is also very high in MHz but it is very weak. If you measure the inductance of both coils and calculate for a right capacitor for both module resonating at the same resonant frequency, then the range will be very good, several feet. Try it. Thanks for sharing electromagnetic induction transfer. Oh another idea: if you wind the same coil on a ferite rod or put a ferite rod, it will increase electromagnetic field and may work within several inches. Chao.

[@GulshanSingh877]

No, you are wrong. It is a WPT - Wireless power transmission ok

[@ronofour]

what is the name of the tool he's used to connect the wires?

[@soaringhightechnical]

What is the size of the cupper wire used or how many mm² is it?

[@skynet-robotics]

0.25mm

[@Carrom_king_saurya]

Sir, how to make 12v wireless transmission send mi a diagram

[@YCgadget]

What is the diameter of coil

[@Lunaclouzy]

Can u tell Me the materials used

[@khomdrambishorjit6471]

Will it work on 10K resistor

[@SS15395]

I have one more doubt, can I use thin wires instead of the thickness shown in your video ?

[@skynet-robotics]

Yes definitely

[@zakivohra3156]

What do i do if I don't have that wire jointing heating machine? Can i joint it with tape?? And I've made 25 turns is it okay ? And also I've 2222A transistor and not 2n2222A transistor? Will it work?

[@skynet-robotics]

Yes u can give direct join but make sure proper contact has been made. Give turn as shown in video to desire results

[@williamedgardokjrabadiano3138]

Sir, in relation to it's output of power can we transfer higher voltages such 5 volts?

[@skynet-robotics]

Not tried yet I will find solution

[@FireboyK31]

is a transistor neccesary or will it work without one?

[@skynet-robotics]

Yes

[@sanyamverma1753]

Sir I use 2N2222 transistor and 27k resistance with 9 volt battery but it glow only 2-3 time and transistor getting hot and next time it is not glowing... One thing can we use 3.7 volt lithium battery.....

[@skynet-robotics]

Yes

[@niteshduddy9371]

Hey ,can you please tell me if i can use 0.35 mm copper wire)

[@skynet-robotics]

Yes,

[@anuragkumarray2223]

Can i use any number transistor and resistor

[@skynet-robotics]

Nhi

[@rajupoppy9746]

i ordederd 2n2222a transistor but 2n222 came so can i use 2n2222 with 27k resistor ?

[@skynet-robotics]

Yes

[@silentgaming6441]

Is it okay if we use any insulated copper wire?

[@skynet-robotics]

Yes but guez should less than 28

[@Devika_1509]

I made this and I'm using CTP N 2222A LS and a 27 k resistor with insulated copper wire and 9v battery but the led (red colour)bulb is not glowing/turning on please help for this

[@skynet-robotics]

Wire gauge?

[@Devika_1509]

@@skynet-robotics I made it I was connecting wire from wrong side btw thank you

[@anupalsingh1877]

Jo coil aapne banai hai uska diameter kya liya hai aapne Ya diameter matter nahi karta kitna bhi le lo

[@skynet-robotics]

6cm

[@anupalsingh1877]

Ok

[@nailaamber]

Sir i use 23 guage wire and used all the circuit components you mentioned but still led is not lightning up, could you help me in resolving the issue

[@skynet-robotics]

34guage

[@chinmayias8655]

What if I give only 25 turns Will it work

[@Amir-zi1hj]

Hi, can I use a 12 power supply instead of battery? I have created the same thing but it doesn't seem to work.

[@skynet-robotics]

Yes

[@projjwaldhamala1822]

Can it work with 22kohm resister or from lower than it like 10kohm??

[@skynet-robotics]

22k ok but not less than it

[@projjwaldhamala1822]

@@skynet-robotics many videos are doing it in 10kohm and 2N222A how's this possible?

[@skynet-robotics]

@@projjwaldhamala1822 in this video guez of wire is more than 36 If u r using less than 22k then it starts heating

[@projjwaldhamala1822]

Okayyy thanks mate.

[@123squishy11]

can you please explain how it works

[@skynet-robotics]

Mutual induction

[@JHnoha]

I have made 32 turns will it glow, can we use electric tape in place of the soldering device. Also the resistor i used is 27k will that be alright

[@skynet-robotics]

Yes

I used the same but it emitted smoke near the transistor resistor joint@@skynet-robotics

[@skynet-robotics]

What is the diameter of wire

above 0.5mm@@skynet-robotics

[@marobaher9105]

can someone explain this please quick as i have the presentation tmrw and i don’t understand it

[@anasishrafchowdhury9892]

Hi did you get an explanation yet? If you did can you please explain it to me?

[@queenking243]

Can we use 2n2222A transistor and 15 k resistor

[@skynet-robotics]

Yes you can try

[@mzumimvwimi6022]

Can it work if you use higher resistance?like 100ohms?

[@skynet-robotics]

Ohm or kohm

[@monjitakhound9066]

@@skynet-robotics you cant see or what he clearly mentioned ohm

[@swapnajitfulstudyonlystudy]

If we use higher voltage battery, then can we get the light more brighter?

[@skynet-robotics]

No it will burnt out transistor

[@swapnajitfulstudyonlystudy]

Okay, so can we use the coil with more turns to magnify the brightness of the led light? Please suggest any way so that the brightness of the led light is enhanced ...

[@swapnajitfulstudyonlystudy]

Or what we can do so that the led light glows at a far distance from the other coil?

[@akshaypatil3104]

Can we use 24 gauge?

[@skynet-robotics]

U can but the transistor will get heat Best option use more than 28 for desire results

[@AkashKumar-du7nf]

Can we use 547 B transistor And 15 k resistor ??

[@skynet-robotics]

No

[@rohininalkar2613]

Sir I have transistor of MPs2222AM730 but it is heating up

[@skynet-robotics]

Resister value??

[@shrikrishnagurav9498]

Can we do this project for class 11

[@skynet-robotics]

Yes

[@Lunaclouzy]

Can u please give an explaination for this project

[@skynet-robotics]

Mutual induction

[@SreesaiAk]

Mutual induction needs AC current where is ac​@@skynet-robotics

[@juanalmonte1987]

Can u send the the list of materials my son is so crazy about this proyect and he wants to do this project for school

[@juanalmonte1987]

The wire gauge Or a less the exact materials that u use

[@skynet-robotics]

2n2222a transistor 32k resistor 34 guaze enameled copper wire 9v battery 5mm led

[@juanalmonte1987]

Thanks alot for reply

[@Rameshyadav-mh8ve]

maine permanent connectiona nhi bnaya but tape use kra h prr abhi bhi bulb glow nhi ho rha h

[@skynet-robotics]

Insulation coat nikala kya wire ka

[@amitahirawar]

Bhai me trangitor aur ragitor kaha se lau kaha pr milega

[@Fine_painting]

Tv Wale ki dukaan par

[@shalini9173]

Transister or resister ka kitna price hoga

[@skynet-robotics]

10 transistor 5 resister

[@sweetybehera6698]

Can i ues other transister

[@skynet-robotics]

Which one?

[@LavishKamboj-cm7dp]

Bc 547

[@youtubeparmeshcreation377]

C2330 transistor wil work or not broo.?

[@youtubeparmeshcreation377]

Plz reply

[@skynet-robotics]

BC547 gives desire results C2330 -no

[@SreesaiAk]

How frequency is generated in this how emf is induced there is no changing magnetic field then how it works

[@Dee-kr9mp]

That's what I am confused bro, like transistor doesn't switch on or off automatically, or what I don't know, i search online and chatgpt, nothing shows up. Did you find the answer :) ?

[@SreesaiAk]

@@Dee-kr9mp yeah I find it out using chatgpt it's that the copper wire works as an inductor. So the transistor and inductor makes an oscillator which is called colpitts oscillator. which generate emf which induces magnetic field in the another coil.

[@Dee-kr9mp]

@@SreesaiAk Thanks for the reply, I would be helpful for my college project 😊

[@SreesaiAk]

@@Dee-kr9mp yeah 👍

[@queenking243]

Sir, in this video you use small box to round wire Can I use a marker to round wire Can we make small wore rounds like a spring

[@skynet-robotics]

What will be diameter

[@Rahul_Gawli08]

27 gauge ka bana skte?

[@skynet-robotics]

Ha lekin heat karega transistor

[@skybase4019]

Will it work with 2N2222 resistor?😢

[@skynet-robotics]

Yes

[@skybase4019]

Thank you Bhai 😀, I am doing this for my science exhibition

[@abdulsamad189]

​@@skybase4019 kya aapne bana lia and aapke ye work bhi kar raha ha kya and please tell me

[@yashchoudhary.01]

Can I use 34 gauze wire ??

[@skynet-robotics]

Yes

[@harshgaming2701]

I booted it with 1K resistor and 2N2222 transistor but it is not working, what should I do for this? Plzzz help me🙏

[@skynet-robotics]

Use 22k to 27k value resister

[@harshgaming2701]

@@skynet-robotics brother thank you very much 😇

[@frustratedguy666]

Can i use it with 12 v lithium ion battery??

[@skynet-robotics]

Yes

[@frustratedguy666]

​@@skynet-robotics Okay thanks for answering me 😊

[@user-js7sb7fr5r]

Sir ye konsa topic pr h

[@skynet-robotics]

Wireless electricity transfer

[@umapathi2637]

Bro what is the length of the wire

[@skynet-robotics]

20meter

[@GulshanSingh877]

Bhaiya Maine banaya but Mera receiver ban nhi rha hai led kaunsa lu aur kaise joint Karu copper wire se 😔😔😔😔 maine yah apne science project ke liye banaya tha but work nhi kar rha hai resistor maine 20k aur transistor maine 2N2222A aur Battery 9V ki use ki hai mere se kaha glati ho rhi hai please bata dijiye

[@skynet-robotics]

Photo bhejo Instagram par @skynetrobotics

[@GulshanSingh877]

@@skynet-robotics hello ?

[@anjudwivedi5580]

Can I use bc 547

[@skynet-robotics]

No

[@Opgaming12228]

What is the length of wire

[@skynet-robotics]

30 feet

[@haythambinsliman2315]

I made the same circuit it works BUt the transistor is overheating and finally it burns. Do you have any idea why , i amusing a 2N2222 and a 20K resistor.

[@skynet-robotics]

Use more than 27k resisiter

[@spoorthyB]

Y not working? I did exactly as u shown...plz tell wat cud be wrong

[@skynet-robotics]

Check Connection again It's working properly Which Transister u hv used npn or pnp?

[@spoorthyB]

I don't know pnp or npn

[@spoorthyB]

Which has to be used?

[@skynet-robotics]

Npn

[@spoorthyB]

Can I know which it is without multimeter?

[@wasiqmiyan2837]

Wire kitne no. ki h

[@skynet-robotics]

34 gz

[@rajupoppy9746]

I made one but the components were ; 32 gauge wire, 547B transistor, 15k resistance, and turns on each coil were 30, but the transistor is heating up and led is not turning on can you pleas tell how to fix this?

[@skynet-robotics]

Use more than 22k resister

[@rajupoppy9746]

@@skynet-robotics okay i will use 22k resistor but the existing bc547 will work or i have to use 2N222A transistor?

[@rajupoppy9746]

​@@skynet-robotics okay i will change the resisitor but do i also need to use 2n222 transisitor or bc547 will only work?

[@_crazy_chinnu_07]

​@@rajupoppy97462N222 TRANSISTOR!

[@MonkeyDLuffy-lt1yb]

Brother how can i increase the distance between them? Like if i want to make them work between a 30cm distance what do i have to to??

[@snahillgarg]

Sir I have made all but light is not blowing

[@skynet-robotics]

Yes But u hv to cover that joint by tape

[@outlawking6804]

@@skynet-robotics which joint sir

[@Kajal-wz4vq]

Gu7

[@yashchoudhary.01]

I'm using 15k resistance and 547b transistor but try many times light glow 2-3 times only and transistor is too heated 🙄

[@skynet-robotics]

Use More than 27k

[@SenthilKumar-rr9iz]

It's true or not

[@skynet-robotics]

True

[@singlajewellery4369]

Where you get transitor

[@pkbeatz_official]

Electric store

[@legendytfreefire8833]

What is the wire galue number please tell me🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@skynet-robotics]

34

[@AkashKumar-du7nf]

What is the thickness of copper wire???

[@skynet-robotics]

34guz

[@hardpandya960]

bhai mera nahi ho raha hai

[@skynet-robotics]

Npn transistor used?

[@hardpandya960]

yes this is npn transistor

[@beastnff2368]

CIRCUT DIAGRAM PLEASE ?

[@skynet-robotics]

I hv shown in Video