Adam Drake from Mugen Seiki Racing shows you how to clean and service pillow balls. www.mugenracing.com
Пікірлер: 38
@barrysrcdump35573 жыл бұрын
Thanks Adam, I've just ordered a couple of pencils. 😂👍
@AdamDrake3 жыл бұрын
Fantastic!
@D70racing3 жыл бұрын
Great video. I just started using the graphite method. I do use the spray though, it’s just easier for me. One tip for travel if you don’t want to bring the can. Have a spare set and spray them, put in zip lock bag, and throw in your box. Love that sticker idea! Thanks
@AdamDrake3 жыл бұрын
Very cool, thanks!
@JOHND_RC3 жыл бұрын
Wow !!! Very good information! Thank you for sharing 🔥💪🏻👍🏼👊🏼
@AdamDrake3 жыл бұрын
My pleasure!!
@rubencriviDT Жыл бұрын
And what about graphite grease? Or better not to use any kind of grease here becuase of the dust?
@AdamDrake Жыл бұрын
I don't use grease because it will attract dust.
@RenBobbins3 жыл бұрын
For me, I got the most buttery smooth motion when I did all of the following: 1. Thoroughly clean the plastic retainer and upright internals and work in mother's plastic restore to both parts 2. Submerge pillow ball in graphite lube (I have a small tub of it) 3. Polish the pillow ball with metal polish This takes time, so I only polish the PBs when I polished the hinge pins and shock shafts.
@AdamDrake3 жыл бұрын
Very nice, thanks for sharing!
@RoryHollarTURTLERCRACINGАй бұрын
Thank you ……….!! 😎
@AdamDrakeАй бұрын
Welcome!
@broncobill3902 Жыл бұрын
FYI, you can buy powdered graphite that’s used to lubricate locks. This is what I always use.
@AdamDrake Жыл бұрын
Yes, it will also work well, but can be messy to travel with.
@cup_and_cone3 жыл бұрын
Back in the day OFNA's had dust boots over the pillow balls upgrade kits to keep them clean. Surprised Mugen hasn't given boots a try yet.
@AdamDrake3 жыл бұрын
I forgot about those.
@baggszilla3 жыл бұрын
I think if Mugan made a silicone boot to cover any dust from getting inside the pillow ball like traxxas does with the Revo's pillow balls.
@AdamDrake3 жыл бұрын
Great idea.
@bigearl7912 жыл бұрын
Anyone ever try bike chain wax ?
@jfkansas55083 жыл бұрын
CRC Moly lube is pretty good also. It is a little better in high pressure applications. Ron Paris always stressed using it on the flywheel and flyweights of Onroad cars to keep them moving freely.
@AdamDrake3 жыл бұрын
Very cool, thank you!
@Haulinbassracing3 жыл бұрын
now what grade of pencil is fastest on the track. 6B is good for fast laps but i think 3H may be more consistent for long runs LOL.
@AdamDrake3 жыл бұрын
LOL!
@bryanbaker67673 жыл бұрын
Thanks didn't know the Pencil Trick been using powdered graphite in a tube I think it's probably messier than the spray
@AdamDrake3 жыл бұрын
:)
@johnnycash78033 жыл бұрын
What tool you got there looking for a pillow ball tool instead of using a 5mm Allen
@AdamDrake3 жыл бұрын
Flash Point 4 in 1 wrench. www.mugenracing.com
@John_D23 жыл бұрын
@2:30 Pillow ball cups is what I call them. Thanks for the tips , Adam !
@AdamDrake3 жыл бұрын
You bet!
@travblurr80433 жыл бұрын
Which ultrasonic cleaner do u have and what cleaning solution do you use?
@AdamDrake3 жыл бұрын
amzn.to/2XUlFxZ
@joseisales97433 жыл бұрын
what ultrasonic cleaner do you use?
@AdamDrake3 жыл бұрын
amzn.to/34nQvCO
@baggszilla3 жыл бұрын
Wow this is so kool! I love the pencil method.
@AdamDrake3 жыл бұрын
Glad you like it!
@waynerc24203 жыл бұрын
Where can I get a pillow ball tool
@jfkansas55083 жыл бұрын
Get a 5mm L wrench and put a drill stop collar on it. The stop collar helps in keeping the nut aligned when inserting.