Pioneer AVIC AVH NEX Touchscreen Repair Replacement

[@rdzed3505]

Thanks for this video. I have an AVIC-8000NEX and this helped me get through 70% of what I needed to do. The 8000 has an outer screen once you pull the inner one out. Unfortunately it is a single unit with the button bar. My issue was the buttons had gotten so gummed up over 8 years that it kept reverting to the map function. Soaked everything I could in Iso 91%, blew it out with comp air and it works like new. Thanks dude!!!

[@ianomsberg]

DUDE, I watched your video last night and paid particular detail to how you detached your flipdown face and take apart the touchscreen. I have an older 2010 AHV 4200VD and for some reason the colder weather this season was inhibiting the touchscreen sensitivity intermittently. I took it out of the motor track and disassembled the back plate unplugging and plugging back in the touchscreen bus , it was filthy, cleaned it up, slapped it back into the slide tray, and it works better than I when I got it new. Thank you!

[@drewmanning1025]

JUST REPLACED MY TOUCH SCREEN ON MY PIONEER AVIC-Z2. Touch screen stopped responding. Watched this video. Bought new screen, installed and it all works prefect !

[@aerowenn]

This is great. I have my replacement touch screen and I was under the assumption that the foam around the edge was supposed to be adhesive and was confused that it didn't seem to be when I got it, however it looks like it just rides on the frame of the LCD

[@billdennis6186]

Thanks bro, this helped me immensely with installing a replacement screen on my AVH X8850. It's not exactly the same as the one you've done here, but certainly close enough to help me figure out what went where. $11 for a replacement screen vs $350 to get it replaced, thanks!!!

[@Mina2486]

Hey Bill, I have a X8850 also and the screen has also turned white and needs to be replaced, any chance you can send the link to where you purchased the replacement for the screen, thank you

[@gravity5294]

Those damn black plastic pieces that hold the ribbons had me stuck for a minute. Your vid saved my radio and my sanity. 💯👍👏 Btw, I never like videos or subscribe to channels cause I hate how people interupt their own videos to beg people to do so. You did not, so I did what I never do. Much respect.

[@bb67572008]

Awesome , gives all info needed to do a repair . You are the best !

[@joe02323232]

Awesome video my touchscreen came in & i followed your directions. my radio has the removable screen, Model AVH-4100NEX but still worked out perfectly for me ! 👏 😎 🙌 👍

[@reneb91964]

Have a AVH4100 NEX the screen stopped working (blank) one day out of the blue. I had cleaned the screen earlier with a light amount of windex, not sure if that was related. I hate to get rid of my radio, love it. symptoms were a blank screen, and every time I pressed the down button, it restarted the radio. Not sure if there are bigger problems, but it was working great.going to replace the LCD hopefully that resolves the issue. Will follow up, what where the symptoms you had?

[@reneb91964]

Also, I have a 4100 NEX, it is 7 inch screen, did the 6.9 touch screen link on ebay work for it?

[@NFSgamingEvo]

Question I have the avh 5200nex screen is not working some guy from ebay was selling a screen and I told the problem he said ,the screen is no the problem, problem is inside the radio some microchip is bad,radio turns on put the scree is black with some blue lines ,idk if is the scree or the radio ,what you think ?

[@andrewstewart3005]

Mate watch this video so good mate helped me no end to replace my touch screen

[@lenmaloney2198]

Thank a lot. Saved me a lot of time and aggravation replacing the touchscreen. Thanks again!!!!

[@joelberlin5252]

My buttons on my AVH-x5800bhs have been out after the first time I wiped down my screen to remove finger prints. That has been years! No one, not even Pioneer shows this breakdown in order to get those front buttons fixed. No it is just about finding the parts and replacing it myself. Can't wait until it is back to normal. And never again, use any liquid near the screen and buttons. Thx bro!

[@joelberlin5252]

Got my button card and installed the new one. Put it all back together and the button issue is still the same. That issue was the buttons do not match. Display button opens the CD eject screen, Volume lower opens LCD options, volume upper nothing, and so on. The new button card does exactly the same broken functions as the old card. UGH! What else could be wrong? So frustrated!

[@beaucephus526]

I’ve had this same issue on my avh 4000nex for years. Only my volume buttons work. So frustrating.

[@facugodoy8822]

@@joelberlin5252 hi! my buttons also doesnt work, how did you manage to open the front display in order to unscrew de 2 bolt that hold it in place?

[@Smikal100]

Why did you identify button 3 as 2 and 2 as 3? Did the button format change during your instruction or is it just an error on your part. I'm certainly not trying to nitpick. Your video and instructions are excellent and very helpful. I just wanted to clarify the steps so I get them right on my end. Thank you

[@stormihogan7142]

Hi. I replaced both the LCD screen and ribbon cable on my AVIC 8100NEX. The screen is still black. No information about this on the internet that I can find.

[@farazhanif]

My eject button stopped working along with skip tracks next to it. The other buttons work on the left side. All the buttons illuminate fine. Apart from needing the eject button to tale rhe screen out i cant find the button strip. Maybe if i just change the cable be ok?

[@FlipSideGarage]

What would cause a radio not to come on? Pioneer 4200 nex. Fuse are fine. Bench tested and it keeps popping the radio internal fuse next to the wiring harness plug

[@joe02323232]

Good stuff bro! I’m attempting to fix mines this week once the touch screen comes in the mail! I have the 4100-NEX with the detachable face.

[@reneb91964]

Also have a 4100 NEX, what were the symptoms yours had, my display went blank one day, had been working perfect for years, had cleaned the screen earlier, not sure if that is related. How did this work out for you?

[@reneb91964]

Also, I have a 4100 NEX, it is 7 inch screen, did the 6.9 touch screen link on ebay work for it?

[@joe02323232]

@@reneb91964 I actually found a cheaper screen on eBay lol but yes the 6.9 inch screen worked for me. The unit was sitting on my passenger seat and I slammed on breaks b/c a driver didn’t use turn signal.That made my unit roll on to the floor and crack the display 🤦🏾‍♂️. Once the display was cracked the touch screen stopped working completely. I could still see the screen but it wasn’t responding at all. Now it’s back working 100%

[@reneb91964]

@@joe02323232 glad to hear it. My display went blank one day. Replacing the LCD, hopefully that is it. Buttons light, but not always responsive, hard to tell with no display.

[@joe02323232]

@@reneb91964 I would definitely start with the screen, I’m pretty sure that will do the trick!

[@reneb91964]

Also, I have a 4100 NEX, it is 7 inch screen, did the 6.9 touch screen link on ebay work for it?

[@LNWLF-cb3di]

Any tips for getting screen to tilt so I can access screws to remove?? I can’t get it to do anything cause it’s stuck on choose language screen

[@cam68644]

Hello Max I am having a problem the button board clip doesn’t hold the wire the black hold on clip came off and I don’t know how to put it back can you help me

[@bradleylewis8534]

Any testing ideas? AVH-4200-NEX does not power on from button at lower center of screen. Where should I look first?

[@oscarpena4514]

Is it possible to replace the RCA ?? I bought a avh4200nex with cut off RCA plugs , thanks

[@oscarpena4514]

It was possible and now fixed 🙂

[@chrisa9369]

I replaced the touchscreen which seemed to be the fix ! Thanks again for the video ! The problem I do have now though is that my color seems to have inverted. I tried redoing all of the connections again but didn't seem to help. Any idea ? AVIC z150BH

[@michaelpruitt9770]

Any idea where I can get a replacement touchscreen for avic-w8400nex

[@Stuntingonmycanam]

Being that the screen will not respond to touch will that effect the buttons

[@371designteam9]

I have a Pioneer avh 4100nex in a jeep and the removable faceplate got wet and the right side LED lights on the buttons went out. Anyone know where to get an LED replacement?

[@dragonboy7761]

Are the LCD Display and the Touchscreen on the Avic-z110bt the same as this one? The screen on mine is unresponsive to touch and there is a little burn spot from the sun shining in on it. What you think needs replaced in this situation?

[@reneb91964]

Hey there, I have a 4100 NEX, took it apart, my screen went blank one day, also the down volume seemed to reset the unit. Not sure I have bigger problems. Either way, can i safely clean the inside of the resistive glass? I will order a new LCD too. Any other suggestions?

[@jasminemartinez971]

i have an avh-4500nex but when i placed everything back, it just wont turn on anymore. the buttons seem to work, do you know why this might be?

[@hijack3]

Im from Europe and I can't find a flapping 2DIN unit from Pioneer. AVIC NEX looks great, seems not available in Europe though. Does anyone know a flapping model in EU ?

[@Pinkielover]

It's actually quite easy to take all that plastic off just take your time ,I had to replace my SD card because I was stuck in boot Loop on my nex 4400 And I had dust under my screen I'm gonna try to do videos on it eventually I did one where I took out the SD card but I haven't posted it yet because I'm too lazy to edit the video but if anybody needs an extra SD card you can buy them on eBay or you can download it I made a couple extra copys..Also if you use a better SanDisk higher megabytes per second card it does make you load faster only by a little.. My detachable face I just took a part in about 10 minutes ago to clean the screen between the resistive touch and the lcd screen..One thing they should've used LCD border seal tape to hold the resistive touchscreen in place so no dust gets between the gaps in the stock one where dust can get between I just ordered some on Amazon when I get it and I'm gonna put it on ,,so no more dust gets between... But it was fairly easy to clean maybe I'll post a video ..Either way when working on these radios take your time with screws you can strip them very easy.. Lucky I had no problems I was very nervous taking that detachable face apart...I did everything while sitting in the car even cleaning it..lol

[@marklengal9990]

I have a cracked screen on a kenwood DMX7705s. I think I found the screen but it says digitizer not included. What does that mean and do I need it if I’m just replacing the screen? Help please.

[@joeygarcia6647]

I just ordered a new screen for nex4200 It keep changing colors and going off when the bass hits so hopefully thats whats worng with it thanks for the instructions

[@Yjen_mua]

So my screen is just black during the day but you can kinda see it at night. What you think is wrong with it?

[@reneb91964]

did you figure it out?

[@joshholden8561]

Ima try this on my 210 ex the touch screen only works in certain places and the places i need it to work is where u adjust and turn on off the subwoofer settings

[@walidamran]

You are smart man ,, thanks 👍🏼

[@111dobson]

Hi. I have Pioneer AVH-Z9200DAB. Is there any hidden option how to disable initial warning screen after booting the system?

[@pedrogsantamaria5271]

Thanks have you any picture of where the 40 pins connect to I forgot how I remove those wire?

[@markdhannguno1288]

Nice video. Can I ask something I have Pioneer AVIC-MRZ77 and the touch glass from AVIC-7000nex will work?

[@水樽-b1j]

big thumbs up for this guy! very useful video

[@joshuabreg7536]

How do you remove face with no power to unit?

[@Pinkielover]

Underneath there's a button

[@ramonortiz839]

Thanks so much, your video was too useful, very clear and easy

[@vicky-nc3to]

Hi my pioneer abhi 3500nex turns on 😢 but than in 5-6 seconds it turns on automatically... Any idea how to repair ? Thankyou

[@sebagarayco]

Perfect instructions. Thanks for sharing!

[@terrellcurtis8135]

On 7200nex, Eject button does not work. It there a bypass to open screen. I can not pull the screen down. I am not sure if I ever even tilted or put a CD in the radio.

[@stormihogan7142]

The unit resets when the power is disconnected. You have to bypass the setup screens to get eject to work. (Difficult when you can’t see what you’re pressing). Mine is: Touch screen twice in upper right corner then touch bottom center (where the ok usually is at startup) That should allow the eject button to function, but it does nothing until the appropriate buttons (that you can’t see) are touched on the screen.

[@cyberlocc]

Would a Capictive Screen from a AVIC w8400 work on a W4400 do you think? I have seen they use the same LCD, but not sure about the Screen. There is also people who sell SD cards with the Firmware for 8400s that works with 4400, stating the only difference is cheaper screen and software??

[@JesusGarcia-rt2co]

Yo you are life saver. If i ever see you i owe you a beer! 🍺

[@michelledelarosa5319]

Where can I get the 4 wire resistive touchscreen??

[@cartycartyamplifiersalesrepair]

Great video sir really appreciate this video keep up the good work nuff respect 👍 👍 🙏

[@4wheels269]

I have the pioneer avic x920bt and as soon as I start moving the radio died I can't even listen to the radio is that part of the bypass as well if so I have tried everything to bypass it and can't if I update the radio would that help does anybody think

[@mathewobrien1807]

If the screen is cracked how can I get to the screws. touch screen won't work.

[@cleftoftherock6797]

Great instruction. Thanks. Appreciated.

[@drewmanning1025]

Can you help me? I've removed my touch screen. I want to buy the correct replacement. My model is the pioneer AVIC-Z2 HDD. I saw model you mentioned but can't determine size.

[@drewmanning1025]

The one I ordered off your post was too big. I need one 3.6"x6.5" can you help me find the right one? Please.

[@joanemilvasquezruiz6287]

Hi, I have the model Pioneer AVH-W4500NEX and recently the screen image started to distort, I need help please thanks

[@blade8485]

This helped for the HRZ-008 as well. Thanks!

[@Mo_Daze]

Okay but mine is screwed in my car and it connects to my phone I hear music, but I can’t access it because the screen is completely black and I can’t see anything. I can’t even see anything!! But it still play my Bluetooth music from my phone. I can’t even take it out my car. I think it got water damaged because it rained and water got on it

[@patparker2000]

Replaced the screen but the touch is off? Do you know how to recalibrate it? AVIC W8400NEX

[@melanieriley2877]

Great video ! Do you know anyway of removing dust caught between the casing touchscreen and the actual touchscreen? I’ve got dust caught between the layers of the touchscreen . It there a away of getting it out without taking the screen apart ?

[@MobileMaxCarAudio]

no, it will be tough the seal is pretty good, maybe some compressed air but your best bet for a serious cleaning is to take it apart.

[@Pinkielover]

Yes you can depends what layers more than likely it's between the LCD and resistive touch you should be able to remove any dust particles my 4400 was really easy actually kind of pissed off because they didn't put any border lcd tape so no dust gets through.. But they did use it for the LCD screen itself...But now I don't have any dust so far it will happen again

[@dbaudaire]

hello. good video. the digitizer is = on avic zh-07

[@jamesscheider7055]

I have a avh -w4500nex in the FM radio stations are gone what can I do to fix it

[@Pinkielover]

Could be your internal SD card is failing or about to... ..it Does strange things before it fails.. I had to replace mine because it went into a boot loop ...it's fixable and it's a pain in the neck but you would need the operating system on another SD card then you need to open the unit.. Look into fixes on Google there's a few you can actually download and follow their steps I had a few extra cards just incase for my 4400 but I'm not sure if it would work with your 4500.. either way they installed really crappy SD cards in the pioneer units.. they will fail.. Me I put a faster card in And it's SanDisk I'll post a video on my channel maybe because I actually filmed the first initial start up you'll see how fast it loads ,i also show how to take the unit apart I've just been lazy and havent uploaded the video

[@jamesscheider7055]

@@Pinkielover They sell them on eBay do you sell them if that will fix it I will buy one in a heartbeat

[@jser4822]

So what causes them to go bad?

[@thepuchis1405]

Execelnte desde Colombia busque por años este video mil gracias

[@paulbodie8714]

Hi, someone threw something at my screen, which I am guessing it the lcd. My radio is a avic 5200 nex. I can't seem to find a replacement screen for that model. Could I use an LCD from a different radio?

[@MobileMaxCarAudio]

If you open up the radio you can get the lcd model. Then you could Google that lcd model instead and buy that instead of looking by pioneer part number but it could be a good chance no one has it sells it

[@nebeljc1]

NEED HELP!! I replaced my touchscreen. All seemed to have gone well. I put it back together, and now my screen won't turn on. The buttons won't light up either. Yet it still slides open. I can still touch the screen and it works. I just can't see anything. Can't find anything online about this either. BTW, I have an avic z120bt

[@reneb91964]

were you able to figure it out?

[@nebeljc1]

@@reneb91964 yeah. Apparently when I was replacing the screen I ripped one of the ribbons just a tad. I ended up selling the thing. The touchscreen replacement would have been rather easy had that ribbon but gotten tore.

[@reneb91964]

@@nebeljc1 Thanks. Replacing the lcd screen. My touchscreen should be fine was still beeping. My buttons still light up and beep but not consistently. Hopefully lcd fixes it.

[@mattryan5393]

So the touch panel cracked doesn't mean your lcd is broken? I wasn't sure.

[@martinlewis2143]

Thank you for uploading the video. I have an AVIC F70 DAB and recently when I turn the volume up or down the channels on the radio station (DAB & FM) start changing. Is this a common fault with the button board? Many thanks and much appreciated if you're able to give any advice.

[@jandomin]

Were you able to solve this problem? Mine has developed the same problem. I am unsure if it is a hardware or software fault since it occurred after I updated the firmware but that may have been a coincidence.

[@anderlaboreria2512]

Hi! Is it possible to connect a capacitive touchscreen instead of a resistive one?

[@MobileMaxCarAudio]

from our research we don't think so the connectors are different.

[@gulier5775]

thx a lot for the video, where to get button motherboard?

[@MobileMaxCarAudio]

www.pacparts.com/model.cfm?mfg=Pioneer&model_id=AVIC7100NEX&row_start=11&src_model_id=avic&action=list_part

[@DougT25427]

Thanks for taking the time to put this video together. I didn't see the links to the sources for parts for these units. Do you have any... especially for the hard button assembly?

[@MobileMaxCarAudio]

Hey Doug, If you check the description there is a link to additional parts. Pioneer sells parts through pacparts online. I believe the button assembly is referred to as Sub Panel. The part number pacparts uses is Pioneer CNU3147. You can see the link here www.pacparts.com/part.cfm?part_no=CNU3147&mfg=Pioneer. I would have them confirm with an image before you place an order.

[@RUGUNIT]

Do you (or anyone) know if the touchscreen and lcd are swappable across all NEX units? I'm looking to replace my 2330 screen with something from a better model, hopefully with a capacitive screen.

[@MobileMaxCarAudio]

They are not they use different pin outs on the main connection from board to radio and then the touchscreen and LCDs are different. We have taken about 7 different models and 3 did share the same LCD model but the others didn't.

[@dangerbird77]

Great video, super helpful!

[@christianenciso4143]

My ave -2330 has a white screen would you happen to know what part I need to order ?? I have tooken it apart nothing obvious is bad but could you suggest something ??

[@MobileMaxCarAudio]

We don't have the correct training or tools do diagnose that issue for you. My best guess and where I would start is by replacing the lcd

[@christianenciso4143]

@@MobileMaxCarAudio thank you can i buy then icd from you

[@MobileMaxCarAudio]

@@christianenciso4143 no sorry we don't sell them

[@roamsweethome4895]

Where do you suggest to get the parts, (touch screen and LCD)?

[@MobileMaxCarAudio]

either from eBay or the site we have linked in the description.

[@arnoldgarcia9827]

Question I can’t pass the language I cleaned the screen

[@vito1giani]

I have x490bs It's freezing for language Menu it's not going after the Anybody help me???

[@Glowboy84]

Hey, I have the 2330NEX also. It looks like a 4 pin based on the pacparts website for the 2300NEX. Would the aftermarket one you suggested work for the 2330 as far as you know? This video is great!!! I can totally do this repair on my own. Someone broke into my car to steal a backpack and the glass spray left marks on the touchscreen. Now, I'm thinking about selling my 2330 and upgrading to one with 2 usbs so I need to fix it to sell it.

[@Glowboy84]

On the pacparts website it seems the difference between the 2300nex and 2330nex touchscreen replacement is the 2330nex has cushion. Is there a way to fabricate that or use from the original.

[@joserojo6273]

Any chance of it having recovery mode?

[@DaInfamous0ne]

I hope this can fix my AVH-X8500BHS.

[@Soicydavedahtech]

Replaced my screen twice and it keeps coming out white 😪

[@jcampbell6725]

Very good video very knowledgeable very helpful

[@FernandoCastro1]

Great job man!

[@007030]

Thats a very useful Video. I wasnt aware that NEX were Android Based. Can i do USB debugging on 8400 Nex? or any Nex? Its expensive to do anything. But just wanted to know

[@corybikemech]

Great info. What do you think about intermittent hard button performance? Could the button board just be cleaned?

[@MobileMaxCarAudio]

yeah its really common on these units. I would clean the button assembly like you mentioned

[@corybikemech]

@@MobileMaxCarAudio Funny, I just got the board out and your message popped up. the button board and harness have corosion on the copper. I'll try to clean, but what do you reccommend for the weather stripping around the screen? Thanks!

[@crazyharis]

Thank you !!

[@fuchengwu]

good job

[@bumeris34]

Hi,thanks for good video it’s helps for repair display....🙏👍

[@tayg2035]

It won’t let me get past the language screen . I had to have my car jumped and this is when it occurred. When I try to click English it selects the last language . Please help

[@MobileMaxCarAudio]

What model radio is it?

[@tayg2035]

pioneer avh-x4800bs