Pioneer DJ DDJ-REV1 Review | Beatsource Tech

[@damonhicks7003]

I’m 50 years old and always wanted to learn to DJ just picked this up

[@Ziggy_v2]

I want the Rev7 but my bank account says you're getting a Rev1 😬

[@Major_R10T]

I want one too, But my rane one would feel jealous. 🥺

[@rjmn1]

🤣🤣🤣🤣👍❤

[@djserge]

Lol. Mine too!

[@TheGalecoker]

🤣🤣🤣🤣🤣🤣🤣

[@tonybeatbutcher]

ReV1 is 7 times cheaper than Rev7

[@DJMikeMarquez]

PioneerDJ is extremely smart. What they did for the evolution of a House DJ to CDJs (DDJ-200, 400, 800, 1000, Club Layout/performance ready) they are finally doing for the Serato / open format DJ. If all open format DJs use the DDJ-S7/S9/S11 then this REV-1 is their DDJ 400 with the REV-7 being their DDJ 800. I would not be surprised in 2023 you see a REV-11 with a full S11 Layout. As they perfect the bugs with the controllers I could imagine the XDJ line becoming the REV-DJ line and from there, there will be a LOT of used Rane Ones on the Used section of your local DJ shop! Lol Good Job by PioneerDJ!

[@Bradmopar]

I agree with you 100% I think that’s exactly what they are doing! I

[@bigdaz7272]

Stand alone with Screen and 10 or 12 inch platters what i am hoping for. Rev10 or Rev12 :)

[@EuroNation]

lmao

[@NinSevenTea]

I think that the Rev7 is the DDJ1000 of the series. I think we'll see a Rev3 or Rev5 made with some parts from the RX3 or 800 which would be the middle ground controller.

[@djmark-1885]

My first dj equipment that I got for Xmas back in 1984 was 2 mismatched belt drive turntables (one was a Sony & the other was a Audio Technica) and a Realistic 32-1100A mixer. I most definitely made the most out of them!

[@Mojaxx]

Those with mismatched turntables were the real ones! Salute!

[@djmark-1885]

@@Mojaxx No doubt! Much respect!! Salute Mojaxx!!

[@rajchoudhury5130]

@@djmark-1885 proper dj mate.

[@djmark-1885]

@@rajchoudhury5130 much respect!!

[@deelew25]

I bought everything from a pawn shop with saved up allowance. The struggle was real, but satisfying.

[@djbowlz2128]

I would love a mid version with non motorized platters with displays on them.

[@presidenttrahan]

I just bought this and i'm already pretty pleased. You just taught me everything, thank you. Sincerely, a semi-noob dj that was puzzled by this thing right out the box.

[@reillocb]

I used to do basic house parties with the Numark idj3 back in the day, but I never followed through with it. This device looks like such an amazing value I'm gonna restart my dj hobby

[@PhiMobileSounds]

Get back in there buddy. I started on the idj and idj2 back in college.

[@macdjmarco]

Oh wow. It's like, i've asked for this kind of design way back when the first numark fx came out. A turntable feel and format when you have a ddj s9 and turntable packed in a controller. Holy mama. I love it

[@rodrigoperaza]

Max respect MoJaxx! My first setup my first setup was two used technics 1200 mk2's with a Gemini 626 pro mixer and two Gemini CDJ 1200 players. When my technics got messed up. I actually improved my mixing on the gemini cdj's. The cdj's had a delay from when you would press the play button to when the track actually started to play that helped me improve my timing back then. I think it's amazing how gear has evolved and how it has evolved what and how we mix.

[@djkellykel3383]

Good to see you back in action MoJaxx! The Rev1 looks solid and I appreciate what Pioneer has done with this as well as the Rev7. Appreciate this channel and all of its future content. #Respect

[@emceeunderdogrising]

Just got mine today. I just needed a lightweight piece for rap shows. Something for light scratching and mixing sets. I really like it. Seems worth it.

[@DJBennyswift]

I started back in 79-80 back In Chicago with cassette decks, which turned into one turntable and cassette deck, then two non pitch turntables and finally ended up with 1200’s…but I stopped in the early 90’s…I just started again in May 2022 with the Mixstream Pro, I just picked up the Rev1 due to wanting to learn Serato. Really interesting learning this new technology.

[@BurstupTV]

This is a great review, thanks! I started out with Technics SL-1210 Mk II turntables and a Vestax mixer, many years ago. I'm still using those today, you can see me mix on them in the latest video on my channel. However, I also love CDJs and controllers. I recently got myself the Rev 7 and I love it, but it's heavy! So I will also order the Rev 1 for reasons of portability. Oh, and I'm also thinking about getting a pair of Rane 12s and the Rane 72.

[@rjmn1]

Can't wait to see what Pri yon joni does on this- him and Carlo Antendido... Both monsters

[@salvadorcastaneda379]

This looks like a great backup controller or one to use messing around at home. I could see myself using this at a gig too especially if it’s a wedding where you don’t need much. Carrying 1200s is overkill for small gigs.

[@JayDiesel717]

Debating getting this for small events etc, rather than bringing my SRT.

[@migueljorge513]

Thanks for the video brotha. I just got this controller from my wife for Christmas and can't wait to get familiar with serato and all it's cool functions

[@queensstreamingchannel]

I am a new DJ! Single mom and doing something I love ❤

[@aj6761]

As silly as it may seem, I'm considering moving from my sb3 to this one because I love the layout.

[@djboomshot]

I'm definitely gonna try to convince any of my newbie friends leaning toward controllers to get this one. Incredible piece of gear for the price! I started off in the late 80's with 1 Technics SL-3200, a JVC dual cassette deck, and a Radio Shack Realistic 32-1100A mixer. (countless gear later, I'm currently on a Pioneer s11 and 2 Reloop RP8000s turntables ...how far we've come lol)

[@victorsaenz9452]

I’m about to buy this, I’m glad pioneer released a new beginner controller

[@IceMic]

Never owned any and I just got the Rev1. Hopefully it’s a good starter

[@titusbest4201]

So i haven't touched DJ equipment in about. 30 years and i wanna get back into it. As a kid i was kinda discouraged from DJ'iing by family members. So here i am in my 40's and i wanna fulfill a life long dream to do it. I have just pre-ordered the Rev1 (Gold Limited Edition) from Guitar Center. Really excited to get my hands on it.

[@JuraFresh]

I started with a Hercules MK2. Little plastic box but I made magic and rocked night clubs with it. It’s amazing to see what options are on the market now.

[@jasdas007]

I'm trying to get back into DJing and was going to buy a brand new SB3 and was told it's been discontinued. The store I was going to buy the SB3 told this today and told me about the Rev1, I like the review you posted and probably will get the Rev1, but it's not coming until mid Feb over here in Toronto. Thank you for the review!!

[@lustforlow-end6022]

Hi everyone. About the split cue issue. My DJM400 doesn’t have it either but if you keep the master headphone cue button *ON* then just use the buttons to select between channels 1&2 you end up with split cue!

[@djawek]

Some mixer havent this option. Ot does not bother you during the mixing ?

[@crazygoodexperience]

This is a great video, I am wanting to start out and it is currently on sale so after hearing your video I am going to buy. CANT WAIT

[@aliboy123]

For the same price point you can get the Numark Mixtrack Platinum with a digital screen on the jogwheels. But i do like this layout though.

[@MrMaui38]

Yup that’s the biggest competition for me. But I think this having the pioneer S7/S11 setup makes it the winner for me

[@lewulfe7675]

Naw..... Pioneer might have finally won me over... With these revs. Their brilliant really. Layouts... Absolute brilliance... No need for redundant auto loop but still good to have both options

[@CJ-gp9yh]

Yo Mojaxx, love the new format

[@lovreneno]

Great and informative review as always Mojaxx. Just please leave that :O faces thumbnails to influencers 😂 DJ community won't click because of that, forget what social media managers tells you

[@Mojaxx]

Sorry, but I have to disagree with you. It’s the way of KZbin these days - because it’s been proved to work. Not saying I love it, but that’s the reality!

[@CS-ep3ku]

@@Mojaxx Sad to hear it's come to that man. I've always loved your reviews, mostly because of the honesty/sincerity; you seem like a real one for sure. This definitely feels like a step in the opposite direction and as the OP said, it screams "influencer" / sponsored "reviews" etc. I believe you when you say you don't like it and I hope you'll stand up for your integrity and let your content speak for itself rather than just chasing clicks above all else. Thanks for all the great content up to this point, looking forward to more in the future. Cheers from across the pond

[@Mojaxx]

@@CS-ep3ku Again, I’m afraid I have to disagree. A cheesy thumbnail doesn’t influence the content in any way - I’m not about to change the fundamentals of what I do. That would be crazy. But cheesy thumbnails with faces on them DO drive clicks, that’s just a fact. A prime example for me is Linus Tech Tips - that guy is the king of the clickbait thumbnail, but I completely trust his reviews. Ultimately for those who would watch the videos anyway, the thumbnails make no difference, but it might encourage more new viewers to watch. And I’d love to be connecting with more DJs around the world. What’s the point of doing this otherwise?

[@Mojaxx]

Just to be clear to you both - this was MY idea. It wasn’t some diktat from a shadowy social media person. I spend an absurd amount of time watching KZbin, and I see what works.

[@CS-ep3ku]

@@Mojaxx Thanks for the response and I hear you. Was concerned this might be the start of a slippery slope toward "lowest common denominator" / maximum clicks type of content, which I've seen on so many other channels. First the thumbnails, then the content itself, then the cheesy/phony surveys, skits, etc etc. You know where I'm going with this. But you've addressed that concern and thank you for that, much appreciated. I hope this approach works to grow the audience as you said. Thanks again for addressing this and best of luck going forward! (edit) Oops, forgot to say in my first comment that some of us do avoid channels with the cheesy thumbnails (and have unsubscribed / stopped watching because of it), though I concede I'm probably very much in the minority on that. Just my $.02 at the end of the day. Either way, best of luck with the new direction.

[@DayPartyExperience]

Just ordered I bought the dj 808 two years ago wanted to get the rev 7 but still getting my money's worth out the 808 this looks like a nice throwback back up mixer to have some fun. Going to play at the bar on friday with it on the system if I like it I will keep it if not it will go back will keep you posted.

[@epeventseppromos8780]

The 2 in one decks are for mash up n live remix n beat backing

[@churchillcoins8519]

Great review of a nice budget controller with lots of features. My first attempts at scratching was on my parents stereo turntable. After snow shoveling and Christmas cash I purchased a pair of used Pioneer PL 514s ($180). They were belt driven, had an S arm and a counter weight. First mixer was a RadioShack Realistic 3 channel mixer ($100). The first upgrade was to the Pyramid P4700 (wood side) mixer. This was in 1984 in the Bronx NYC.

[@DJTechnoboom]

i really hope they make a DDJ-RB 2 with vertical tempo faders, and trs or xlr out puts

[@bfastier]

Looking at getting one for the kids to learn.. seems legit 👌 Thanks mojaxx

[@shauntaylor1180]

NUMARK TT 1550 WAS MY FIRST TURNTABLES. I GOT THEM IN 2006 WITH A VERY STANDARD BASIC NUMARK MIXER. VINYL WAS THE SHIT. AND THEN WE PUT UP THE TRACTOR SCRATCH SYSTEM WITH TIME CODE VINYL. WHAT DO YOU THINK ABOUT THAT?

[@motion2wanderlust]

Haven’t DJed in years but decided to scoop this, looks like fun!

[@gamingheadztvMediaHeadztv]

I can't wait .. a few years ago I tried the Numark NV and I hated it as I used to be a turntable DJ b4 my sis blow out my Vestax pdf 2300s . .. I wonder if I will be able to use this as a sound card for fl

[@djhavickofficial]

**GREAT REVIEW MOJAXX **#CHEERS****

[@ScantlessBeatz]

This was a great video. So i just got this yesterday its been about 10yrs sinces I last touched any deck and i spent the whole day learning the set up and cutting up for hours. I love it the only I do not like in fl studio I have serato sampler and I can not get the jog wheel to use to scratch up the samples thats the main thing I needed.

[@szityin]

I am thinking about to get these (two of them) and mapping them in Traktor Pro, so one of these would control decks A & B on a laptop stand, and the another one would control decks C & D. Currently I have a Traktor S4 MK3, but 4 deck control.. could be better, even after I've remapped almost the whole thing.

[@EmmitElliott]

Gemini XL tables, Gemini PMX-12 mixer, Stanton 500 cartridges

[@krisjanssens2657]

Hello, Thank u very much for your video, really usefull. It's been quite a few years since i was dj-ing and lokking to start again, but it looks like things have changed (feeling old now 😅). I was just wondering how and if i can use headphones to listen to one deck as the other one is playing on the speakers. I have a laptop with Windows 10 to use with the Pioneer DDJ-Rev1. Kind regards, Kris.

[@MultiHotFlash]

My first dj equipment was piece of shit - Numark 32. Now I looking for something to replace my home stereo and I think it cold be cool to have controller insted. What do you think fellas?

[@cloudthedj]

I play on mixer/turntables but I think I’m getting this for smaller gigs

[@MySoundboy]

No jack what is your comparison view with this controller against the new Mac platinum FX controller which is better thanks awaiting a response

[@rodneygriffith7424]

Looking for a travel controller, something that can fit in a backpack or carryon, what’s the best on the market.

[@michaelsinclair1509]

Ddj sb3 was disappointing for me so am planning to get this one hope I will love it like my sb 2. Thank you for the best review so far.

[@nathanielosbornejr.2373]

I just pursed one, I been djing for years and started back.

[@MAZATIK-MUSIC]

DDJ REV 1 only works with Serato DJ LITE or if I buy SERATO DJ PRO will it also work?

[@MrEvanTea]

I'm in 2 minds, I don't know weather to buy the Numark NS4FX or the Pioneer Rev 1....?

[@djdrasticgh1]

Hi sir please I bought rev 1 just 3 days ago but when I recorded my mixtape it didn't sound clearly so i dnt know the situation i snt it back to the shop ,n went back next day to check I connected to my pc now it tells me hardware can't be found om my pc ,thus it cannot open my serato dj pro n also virtual dj pls wats the. Problem is it the rev1 or my laptop

[@sympsirup]

i started on on vinyl with 1200's and a pioneer djm 500

[@kenjomdeori8106]

Please help, I am thinking to buy Rev 1, can I use stems in serato dj lite? Or should I have to upgrade to serato dj pro?

[@djnardy8543]

Can you use the Rev1 to mix with virtual dj software

[@hernanvergara9313]

Hi, last time I checked with the VDJ site, it supports it. 👍🏾

[@Desi1080ptv]

Just asking I’m new at this would you buy Mixstream Pro or Rev1 , or DdJ 400 or FLX4

[@phillipvanrheede9995]

What's the best entry for hip hop and House music?

[@IamMarkSmith]

@DJCityTV Mojaxx thank you for this review. The direction Pioneer DJ is going in these days with their offerings is very interesting. By the way, do you have an ID for the track you’re playing when doing your demonstration of the REV1’s features?

[@chief101937]

Can you put your own samples in the pads and can you run serato pro..I don't want to use the limited serato light.

[@dannysvinylrainbow4852]

When it comes down to it is it really de different from SB3 as far as functionality bells and whistles? It looks different but I wonder if it's Worth the upgrade? Thank you

[@thefooba3170]

How does the functionality of the pads change when you use this with Serato pro?

[@reinsphoenix]

why would you do a review with serato lite limiting what some of these features do?!

[@arzumanian]

Is there an entry level unit similar to the Rev 1 that is compatible with multiple software platforms?

[@kojiken32]

Can't wait to get it!

[@myleschiarello]

I need that Blue Monday mix, where'd u get it?

[@DaveDomenicano]

Rev7 Amazing but so expensive... Rev1 Good but so much difference in quality with Rev7 Why pioneer don’t make a Rev3 with serato dj pro, a middle ground between 7 and 1 in quality and price (around 500/600€) 😀

[@oldschooldjernie]

Can you still dj creatively with like djm-s3 and no pads or did you fall into the rabbit hole with the rest? Just wondering

[@adriandja-plusteague1401]

Pioneer should of done this years ago,but definitely good that they have a great starter and pro.

[@kierenmoore3236]

A Cue Mix Control Knob (like the 400 has) would have been nice … ?!

[@jamesbendle4235]

Will this work with Virtual DJ?

[@Savage_7_99]

Yes. I'm using it with vdj 2023 now

[@JesusPerez-lc7of]

I see some reviews saying it does work with serato dj pro but no one says how, I just got this rev 1 and serato dj pro doesnt recognize it, neither is any drivers for it in Pioneerdj.

[@logisticalstyles]

Do you have a license for DJ Pro? Gotta have a license for Pro to work with this.

[@eddieacosta3802]

It works as it enabled to with it but you’ll need a license for Serato DJ Pro. So if you’re like me and have multiple set ups like technique 1200s with a DJM S11 or DDJ 1000 which has Serato DJ Pro already installed, meaning its native to the actual product. This controller will work with it but you will need to have purchased the $249 version of the software. Mine worked until the trial expired and then you’re left w using Serato DJ Lite which sucks hard. I’ll be selling mine as I used it once and I’m not buying the software for just this controller when I already have it on 4 other set ups.

[@OgDj2024]

No split cue!? 😮! I’m a beginner, but I still have to have split cue because that’s how I learned. Although, this piece of equipment does seem like it’s great for beginners.

[@246Musicman]

Does the REV 1 have a function for key change other than the laptop interface?

[@lavolka]

I'm not interested in the controller at all but I just came to like the first Beatsource Tech episode. I wish you success Mojaxx and Co!

[@wesleyolson2624]

if i did get this (beginner btw) why exactly would i be displeased by there not being a split queue in the software? Basically asking whats the function of it and for what reason is it any better than the physical split cue button?

[@JayBishopFunk]

How does it compare to the Numark Mixtrack Pro series because that thing has been great for me to use in a streaming setup. Love the long throw pitch faders on it but I am intrigued by the battle style setup of this Pioneer unit.

[@Mojaxx]

Absolutely in the same ballpark as each other when it comes to quality. I certainly wouldn’t recommend swapping one for the other, in either direction.

[@boogiedownbronx73]

Make the beat source logo transparent and left top or right bottom corner

[@PhilGaitan]

Great review Mojaxx but I’ll pass and w8 for the what pioneer does vs SC6000m But really here is the good news it’s nice to see the new parent of Pioneer really getting behind hardware and pushing it out as opposed to the lesser

[@TecNickelSwag]

Salute, Mojaxx!!! Whats up with all the orange/yellow lighting on it?🤢🤮 looks very tacky. Takes away from the design. Jogwheels are corny too. Maybe brushed aluminum would be nicer. The Gen 1 DDJ Wego Jogs look fresher and even more premium.

[@WebsterStanislas-v8z]

Just in my mid forties and have just purchase DDj_REV_1

[@gamingheadztvMediaHeadztv]

I have sdj pro ... will I have the duck fx in that?

[@truckinsixsixgod3364]

This thing doesn’t work with aerator DJ pro at all?

[@henryesparza8663]

These jog wheels on the rev 7 would be nice. I don't care for the spinning decks on my Rane one. I like platters on a controller and decks on my 1200's

[@EMBEEclassic]

Looking forward to the Rev-5 😁 The Rev 7 is a little too expensive, Rev-1 a little too toy

[@darkstepwarrior88]

Love the way you go through almost all the buttons. You still need to work on the lighting because you look a little pale

[@djexotiqlive]

will it be compartible with serato dj pro in the near future? asking for a friend

[@djserge]

It works with Serato Dj Pro but you will need to pay for it if you don’t already have a license.

[@ryanlaingmvp3191]

Will it work with djay app

[@Barnsey87]

Pioneer DJ DDJ-FLX4 vs REV 1 is a hard one.

[@DJScarta]

Great design!

[@enisboniakos5397]

C’mon should have come with the pro version of serato

[@mhellcess4532]

Is this rev 1 work with virtual dj? Thanks

[@mkAYY825]

a much nicer option than the tacky numark mixtrack. and better than the SB3

[@djsimplesoundsmusic8959]

yes im looking for sometihing like this thank you

[@nourdinh.1450]

Im a DJ from the 80s i Startet with a shitty Mixer Maby Monacor or Something 2 Belt Drive Turntables Fischer and Dual with Pitch Control that was 86 🙂

[@lsdave]

First mixer to use the momentary and latched FX type setup would probably be Intimidation, and then Roland in the 90s. THey were only done on EQ's back then, but still Pioneer did not innovate there. Just like they didn't innovate the BPM counter on a mixer. that was also an Intimidation invention

[@Scientists_dont_lie]

Id personally like to see a comparison between the rev 1 and the flx6. The flx6s jogwheels are what keeep me thinking about purchasing it.

[@djcmanmusic]

want to sell the REV-7 abd get REX-1 instead, ... the REV-7 is a total nightmare to take to gigs .. 10kgs v 2kgs .. and for what a spinning platter? the vinyl emulation is good enough these days even on cheap controllers. unless u cut on 45's, i don't see the point of a motorised 7" platter

[@dancarthen3634]

For this price point the Numark Mixtrack Platinum FX and its jog displays is a better deal.

[@ND-Skyz]

Super weird with the play/pause on the other side. I get the similarity to to battle style turntables, but I’ve always hated that layout personally. Most importantly though, who is going from 1200’s to this. It’s just unnecessary to try and bridge that gap.

[@bryanjonathanentertainment2524]

It's an entry level controller. The idea is to go from this to turntables.

[@ND-Skyz]

@@bryanjonathanentertainment2524 I hear you, but this is assuming someone is trying to make that move and that they will be a turntablist. It just doesn’t track for me. But I’m privileged enough to have analogue and digital in my studio so maybe I’m just out of touch🤷‍♂️

[@phillipmarnik]

Pioneer have other controllers that might appeal to you.

[@anttiskate]

@@bryanjonathanentertainment2524 +1 This is why I think this new series of products is quite brilliant in it’s simplicity. This is really a new opening in the controller market. They now have two separate product lines that offer a path to different kinds of DJing.

[@ND-Skyz]

@@phillipmarnik yeah I’m set with my XDJ’s. Was just voicing my unsolicited opinion. ✌️

[@dasimsim]

May anyone helps me Id like to have budget turntable for scratch LTA mixsars any good?

[@BillyLane916]

Super dope

[@yungy3n839]

Does it have a sync button?

[@retrobluemusic]

ya its a small button in the corner, its such an odd looking deck