Pioneer Flx 10 controller tips for Serato users!!

Decided to make this video for djs who have the flx 10 and use serato dj Pro. I've seen a bunch of reviews on it, and a lot of reviews left some small but very cool details out. So, I added in some of the helpful cool tips. If anyone discovers any more tips, drop them in the comments to help out all serato users and djs alike🤙

[@shameer685]

Excellent review, you touched on some things no one else did.

[@DJStitchProductions]

I'm in the process of switching over to Serato from RB with a FLX10 and this helped a lot, thanks brotha!

[@djgainsbond]

To get into the utilities mode on flx 10, The unit should be turned on but NOT connected to your laptop. Then, you can get into the utilities, by holding down the "back" button. There you will see auto standby, demo, talkover etc. If you're a scratch dj, put the "CR fdr cut lag to "0" and when you're done, hit back again and you'll be outside of the utitlies mode. Best of luck everyone. 🙌🏾

[@FOREIGNBASSGARY]

You SURE helped me 1000000 % I just got this controller

[@kentond1]

Dude, you helped me immensely. Respect 🙏🏾

[@KINGWURLD2023]

God sent him and i hope he continues making these type of info-vids

[@TonyGalactic]

Thanks for this dude. Needed to know how to bring up the arrow on the jogs.

[@Dannyfr33sh]

Ty for the vid. If you hold down the page button the small screen shows what the pads do in each mode!!

[@marcosbabeto]

Nice review buddy!!👍👍

[@basilthompson7811]

Thanks that arrow thing makes my day.......I didn't know how to and I really wanted it

[@lfdjrock]

Cool!!! Thanks for the info

[@ceciliojacquez5783]

A2J, Thank you for the pointers on the FLX 10, I'm a new user to Pioneer Dj products, been a Denon Dj user for many years, I finally made the switch to Pioneer FLX-10, I'm learning the in's and out's of the controller, I have a question on how to exit or get out of using the performance pads, I tried to exit the performance pads mode by pressing the shift button but i could still hear echo and some of the other effects, I would appreciate it if you could tell me what buttons to press to exit the performance pads.

[@DanielDaniela-px8jl]

Nice video. Do you know how to go in software settings and adjust the cross fader curve? I couldn't figure it out how.

[@critchee]

Amazing. I have been griping that the sticker lock had vanished. I also have not managed to get the screen display to change at all. And also since adding the update. Controller has gone wild with its audio routing.

[@DJVINNIE]

Great Help Thank you!

[@bradcanavan]

Thx so much, but I’m not getting the same effect as urs & would love to have clean echo out on a pad rather than having to use the fix button roll. How did u get Clean Echo on a pad, was there something we couldn’t see with ur right hand on the computer?

[@Roy_Dahl]

Can you get two desimals on the bpm in the jog display? I'm an old Serato head but have used Rekordbox the four last years because DDJ1000 did not support Serato. Rekordbox had tow desimals, and i love it since I like to have long transmissions between tracks.

[@DavonCreative]

dope thank you!

[@Noob_Crew_Sledders]

This video is about a year old, how are you liking the board so far? My SX3 fried this weekend and its time to upgrade but sadly the sx3 is discontinued. Landed on either this or the Rane 4. Cant justify 2500 for the xdj. Thinking this may be the ticket.

[@michelledeshields1023]

Thank you!!

[@marcinoron9649]

Thank you very much 🙏

[@wesleyhyland3141]

Thanks dude

[@TheDjelements]

can u make a video like this for the EFX for some reason my reverb is very short ... vs on sRT 1000 it has a long tail ...

[@djarmonic]

How do you activate the Saved Loops? I went from the DDJ1000srt and you simply pressed Shift + Hot Cue to access your Saved Loop. Now with the FLX10, that feature doesn’t work

[@medotami1211]

How did you do it? Key shift doesn’t work with me on serato

[@bigbuddahknowz7808]

Hey I have a external hard drive and I'm having trouble with getting This DDj Flex 10 to recognize it.

[@willleal7363]

Could you make a video teaching how to insert the logo on the display?

[@medotami1211]

Bro i would be really grateful to know how you activated that. Thanks a lot

[@soulcentric2442]

Can that echo effect be applied to your mic ?

[@jdsmart7530]

thank you for the great review , would that be okay to get some real-size and dimensions of the controller pls L- W -H.

[@Earthcitizen4609]

Thanks

[@kokoe79]

Hey bro quick question I’m a new user to the FLX 10 how do you get the Pad Fx stems to work ( the first one on your video ) I can’t get mine to work but I do have the rest of Pad FX to work please help . Thank you

[@oliverbodzin]

the same problem here…no stems on the Pads

[@DJIInLondon]

Why does everybody rate the rane four over this ? This is heavy stem focused, mix point focused one button tempo reset?

[@Djdoublej]

When i press shift pad fx1 it takes me to the beat loops how can i fix this

[@misterluxu3886]

On serato settings

[@kentond1]

I couldn’t see. How did get 4 part separation to work via the top 4 pads? 🙏🏾

[@Jedi_Jonson]

You just go into your settings in serato, go to dj preferences, and click the box that lets you replace a pad mode for stems👍

[@hillaryshingie]

Can the wave forms be adjusted to vertical

[@Jedi_Jonson]

Sadly they cannot. I'm hoping in a future update they can be tho.

[@biga4135]

My pitch play or sample never worked on none of my Controllers

[@anthonybeach7229]

How do you change jog wheel ring color in serato?

[@georgedamian4986]

You can not ! The color is changing when u cuttin out the instrumental, acapella, etc…

[@Djdoublej]

My flx dont do the same as yours when i use shift ☹️

[@misterluxu3886]

Set it up on serato

[@mazusub8182]

Yooo… I’ve got a Rane 4 almost brand new with box, booklets, cables and everything, stickers still on screen and everything only used Twice… if you’re in NYC I’ll sell it to you… I wanna get the FLX 10 instead … just got it like 2 weeks ago.

[@misterluxu3886]

Do u still have it im in toronto we could work something out

[@RealSantahunter]

how to get the flx10 utility tool? Cant find it anywhere

[@Jedi_Jonson]

You get the utility tool from downloading it from the pioneer dj website.

[@vladudj]

hello, how good is the sound quality on the master out???

[@Jedi_Jonson]

Master output is great. I still like the output of my rane 70 mixer more than anything, but the output on this equally as good.

[@luisalbertoluxu4492]

If you want them the same as the pioneer djm s9 or djm900’s u just need the volume gain faders to be as high as 3 oranges, and on the master level it has to be between 9-12 so blinking last orange and it will give you crisp crisp crisp sound. I learned this from an audio engineer

[@misterluxu3886]

@@luisalbertoluxu4492this. And its true

[@kevinwillson4297]

Gn do u have any idea if pioneer gonna let this compatible with virtual dj. If not I won't buy it .just like how they flap with the 1000 not much people buy it

[@Jedi_Jonson]

I dunno if they will make it compatible with vdj. I mean it would be crazy if don't at some point.

[@kevinwillson4297]

My friend have one and he's about to sell it . because it's not compatible with virtual .make no sense I'll get the rane 4 it's already mapped for virtual dj

[@cesnav7593]

No it will never be compatible with VDJ. Put your big boy pants on and learn Serato

[@kevinwillson4297]

@cesnav7593 lol your late on this on its already compatible searato is garbage I start out using serato but a friend introduced me to vdj and am not going back to serato .and for your info once again it's already compatible with vdj

[@OnealAfrica]

Hi. i can't get my serato to work on the fax 10

[@OnealAfrica]

fLx 10

[@Jedi_Jonson]

Make sure you have the latest version of serato, and after that make sure you go to the pioneer dj website and download the firmware update for the flex 10.

[@sixxx-music]

how the hell were you able to get one? I ordered mine and wont ship til september :(

[@Jedi_Jonson]

I ordered mine the day they announced it was released. Took a good two weeks to get it tho.

[@mazusub8182]

Yooo… I’ve got a Rane 4 almost brand new with box, booklets, cables and everything, stickers still on screen and everything only used Twice… if you’re in NYC I’ll sell it to you… I wanna get the FLX 10 instead … just got it like 2 weeks ago.

[@medotami1211]

Hello, you showed it but didn’t explain how we can do this

[@cesnav7593]

Go to your laptop, click on applications. Look for pioneer. In that folder you’ll see image transfer I believe it’s called. Upload your logo in the box that pops up. Do this while your controller is disconnected from your laptop, and serato app closed.

[@hassanselector9495]

How much

[@Jedi_Jonson]

$1599.00

[@TheLazyP]

very basic and superficial review, nothing new. Would appreciate if you dive deeper next time.