Pioneer Rev7 Firmware And Serato Stems EQ Update (How To)

[@DJMARKEE]

Thanks for the tutorial, great job explaining.

[@TheDJConnect]

No worries you got this !

[@djjoelvelasco]

So far, so good! Thanks for the tutorial! 👍👊

[@TheDJConnect]

Let's gooooo ☝️💪🔥🔥🔥🔥 It's a sick update !!!! Normally I never do anything This was worth it ! Just for the 45 long press alone lol

[@djjoelvelasco]

@@TheDJConnect 🤣🤣🤣 love the update with STEMS!

[@TheDJConnect]

They KILLLLLLEDDDDD it!!! I'm in the club tonight, so can't wait to give it a run. Only tested for 30 minutes, so knock on wood everything is good hahahahha I might just run off my internal hard drive music tonight incase lol@@djjoelvelasco

[@djjoelvelasco]

@@TheDJConnect I'm doing a birthday party tomorrow. Should be ok but I'll have my REV5 on standby lol.

[@TheDJConnect]

@@djjoelvelasco hahahahahah I'm not cool enough to have a backup At least there anyways I won't even plug in an aux cord 🤣🤣🤣

[@soundcentral]

Since you you keep the FX default, I’d recommend saving Filter on bank A and Noise on bank B. Then you can switch by pressing Shift+Fx button 5 or 6.

[@TheDJConnect]

As an effect ?? Off of the filter knob ?

[@soundcentral]

@@TheDJConnect yup! The colour FX changes with the FX bank change.

[@soundcentral]

As long as you have a different colour FX selected for the 2 banks.

[@TheDJConnect]

@@soundcentral oh snap maybe I'll look at that I'm such an old lazy piece of shit

[@TheDJConnect]

@@soundcentral the stem eq function will make me start using shift for sure

[@vincestyles1030]

I can't figure out how to use the stems on the left and right decks not in the center where the hot cues are those i have set on the roll button any ideas?? PLEASE!!

[@TheDJConnect]

Say what ? Putting them on the top bar ? You have to midi map that

[@DjTecniq]

@@TheDJConnectnothing needs to be midi mapped anymore. Just use replace pad mode w/stems in Serato settings for roll or sampler.

[@TheDJConnect]

@DjTecniq ya definitely

[@djshortefromphilly]

Glad they finally somewhat caught up to Virtualdj 😅

[@TheDJConnect]

If only virtual dj was any good eh !

[@kudamah]

lol.... serato always way behind. Using stems on eqs with even beginner controllers with vdj. Don't see the big deal in limiting that feature to specific controllers. Never know, their next update may include automix 😂

[@kudamah]

@@TheDJConnect idk when last u actually tried vdj, but it's definitely good... stems are way cleaner than serato for sure

[@TheDJConnect]

Why would you actually want auto mix ? This is exactly why I have never tried vdj It's more of a children's toy to avoid working more than a DJing platform All the bells and whistles and plugins you could want, Other than a good dj program. Why is it I have never in my life, seen a PRO level dj, use virtual dj ? There's no DJs on the planet making cut videos on VDJ ​@@kudamah

[@kudamah]

@@TheDJConnect I was just kidding about the automix, but I hv seen it been requested in the serato forum more than once. Even wmp hv a fade option... it's. Contrary to the popular belief which is a major misconception of what automix is, it really is a helpful tool for anyone needing to step away from their decks, or to hv background music as a cocktail hour or cooperate event. Rekordbox has the same thing as vdj and u don't hear anyone classing it as a toy. Not sure what your definition of a pro level dj is, but vdj did hv a rough start with their integration on hardware in the earliest and that stigma still exists in the industry, like how u have viewed automix in vdj, but dont see it the same way (as a toy) with rekordbox. It's no secret of the biasness that exist. However the program itself has come along way and only those who took time to try it would know.

[@keithchegwin1222]

How would I have known there is an update, if I hadn't seen this video? Thanks

[@TheDJConnect]

Hahahaha got you bro !!

[@AdamSchnabel]

adjustable stem control is why I still use DJ Pro AI...... can you midi map it if your not on a rev...... I been using ddj sx3 which I love.... but i guess they are phasing it out (after fixing pretty ouch everyu problem)

[@TheDJConnect]

Nah I don't think so, It's built into the firmware Which is only also on the rev5 So I think it's locked unfortunately to controllers

[@djgaborkiss]

I custom midi mapped stems eq on my S9, so the answer is YES it is available on any midi device 😊

[@TheDJConnect]

@djgaborkiss 💪💪💪💪🔥🔥

[@djgenius626]

its gonna be hard for me to part with my SRT 1000

[@TheDJConnect]

Fun fact, The srt1000 is the only peice of gear I've ever hated, and sold almost instantly I guess I had it for 3 months until the rev dropped, Sold it instantly

[@icemiles5074]

Can you adjust or match a beat on the jog wheel of your rev7

[@TheDJConnect]

What do you mean ?

[@icemiles5074]

@TheDJConnect How do I beat match with the motorized jogwheel of DDJRev 7. How do i adjust with the motorized jogwheel when the beats are not matching.

[@TheDJConnect]

@@icemiles5074 bro that question doesn't even make sense You might need some real dj training When something is beatmatched, The songs play in sync and you don't need to touch anythingb

[@icemiles5074]

@TheDJConnect Bro, I am still asking how to beatmatch using the Rev7 motorised controller.

[@TheDJConnect]

@@icemiles5074 watch one of my videos on bearnatching Not controller information

[@DjGPower]

You never explained how to actually trigger the stems using the scratch bank buttons

[@TheDJConnect]

I was wrong lol The stem eq is activated by shift flanger or shift reverb On the left and right decks

[@DjGPower]

You’re right that feature you demonstrated triggers the stem eq but the hot que & scratch bank buttons pressed at the same time will trigger just the stems using the scratch bank buttons

[@TheDJConnect]

oh no way? Shift + the top row runs the stems as well? Ill make a follow up and shout you out!@@DjGPower

[@tman542003]

@@TheDJConnectit’s both. Stem EQ on the knobs and separated stem buttons by using the method he described.

[@TheDJConnect]

awesome! @@tman542003

[@BigJo45]

If I paid for serato dj pro should I cancel my subscription? I bought a DDJ rev 7 N and also paid for the monthly subscription of serato dj pro

[@TheDJConnect]

Ya bro cancel right now... Than join the dj connect 😜 Nah but for real, cancel Sorry serato

[@DJKOLEONE]

DID THE UPDATE NO ISSUES UNTIL I ADDED MY LOGO IN THE REV 7 IT SHOW UP BUT THE SERATO WAVE INFO DOESN'T WENT THRU THE SHIFT+33/45 (DISPLAY MODE) STILL DOESNT SHOW UP ANY ASSISTANCE WITH THIS WOULD BE GREAT & APPRECIATED.

[@TheDJConnect]

Hey you have to turn it off logo mode I forget the exact buttons off hand, but you can't have your logo and wave form One or the other Let me know if you need more help I'm at the club tomorrow and will check it out

[@markrobinson2840]

Does anyone know if there is a way to save the current firmware before updating?

[@TheDJConnect]

I don't think that's possible I'm sure you could reach out to pioneer Why would you want to save it ?

[@keithchegwin1222]

I've tried adding that split cue, but can't work out how to do it. Any ideas? Thanks

[@TheDJConnect]

Which split cue? For your headphones ?

[@keithchegwin1222]

@@TheDJConnect I didn't reply to this yesterday, but it got taken down for some unknown reason. Yes apparently the Rev 7 has a split cue. I think something needs to be changed within settings on the controller.

[@TheDJConnect]

@@keithchegwin1222 interesting What does it use now ? I feel like I don't even use hwad phones lol I should know this

[@keithchegwin1222]

I use Serato with my Rev 7 ​@@TheDJConnect

[@TheDJConnect]

@@keithchegwin1222 it's the best :)

[@alfonsodegregorio2723]

hello greetings from ITALY! you know how it works with recorbox ?

[@TheDJConnect]

Nah sorry I assume everything works as normal, Not sure about stem eq but the rest should be plug and play

[@keithchegwin1222]

Do you know how to turn off the censor button off on the Rev 7? It's permanently going backwards. I'm at a gig and haven't got a clue how to make it go back to normal again. Thanks

[@TheDJConnect]

Hit q or a on your keyboard Q for left a for right deck

[@keithchegwin1222]

@@TheDJConnect Thanks it worked

[@TheDJConnect]

@@keithchegwin1222 hahahah thank god 🤣🤣🤣🤣🤣🤣 Scary as hell, def been there with no clue what to do

[@seanscam]

Any bugs? I've heard it affects the platter tension? Have you noticed anything?

[@TheDJConnect]

I had a bit of an issue with serato reloading But nothing yet Unfortunately I have a club gig tonight and havent had TOO much practice time with it, But it played for a solid hour with no issues, So I think it'll be fine

[@seanscam]

@@TheDJConnect Thanks for the update!

[@TheDJConnect]

@@seanscam 💯 I'll let you know how it goes tomorrow morning But I'm sure it's good !

[@integrity2719]

I've been having fun with this update. Do you know where the bottom row of the stems functions went like Instrumental Brakes?

[@TheDJConnect]

They should all be there ? Nothing stems wise has changed other than eq stems

[@itsyowboydjrj]

does this serato dj pro "free" work on rev 5?

[@TheDJConnect]

Yea it does

[@bboymac84]

Wish Serato had more extensive midi mapping like traktor. Traktor had midi mapping on lock! There would be no need for an update for 45 long press🤷🏾‍♂️ even the stem EQ control, even virtual dj had this feature right out the gate🤷🏾‍♂️

[@TheDJConnect]

They didn't launch their stems with eq control ? That dropped at least a year later I don't think the rev works with traktor at all , It just got rekordbox support

[@bboymac84]

@@TheDJConnect yea kinda strange they just got Rekordbox support for their own product🤦🏾‍♂️🤷🏾‍♂️

[@typhfanuwu7526]

Update: I still don’t own a rev 7 and update 2. Don’t even own a controller yet

[@TheDJConnect]

Lol why not

[@Spike7171]

I thought this was Mark Cuban doing a video on Serato

[@TheDJConnect]

Hahahahah hahahahahahahaha Working on it

[@gimmemyish]

thank you but this couldve taken 3 minutes

[@TheDJConnect]

You could brick it too

[@DJOWEOfficial]

TRASH update i now get no audio drivers error each time i plug in!

[@TheDJConnect]

What did you update ? Firmware ? Do you have the disk utility ?

[@OfficialDj2Small]

What i dont understand is that eq funktion because i could eq the stems before the update already. Is it such a difference?

[@TheDJConnect]

@@OfficialDj2Small yes man HUGE difference, When you kill a stem, it kills everything Now you're killing the eq first to say 50% And THEN it activates the stem, So its less abrwwsive to the mix

[@OfficialDj2Small]

@@TheDJConnect cool bro will try it 🤙🏾💪🏽

[@TheDJConnect]

@@OfficialDj2Small ya man It's really good I never update shit, but this was worth it

[@saltytexasranger6301]

First comment!!!

[@TheDJConnect]

Hahahaha let's gooooo bro 🔥🔥🔥

[@DeeJaySunrise256]

Someone, please pay for me Serato DJ pro. I acquired Rev 1 but I need to update

[@TheDJConnect]

You can buy it yourself

[@LEGiON40831]

First

[@TheDJConnect]

Let's gooooo broooo 🔥🔥🔥☝️