Pipe Routing scenarios in different process plant area - Part 2

This video is a Part-2 of Pipe routing series and here i have described the pipe routing requirements based on specific locations in the process plant.
The information's in this video will help to understand the pipe routing concepts to be applied at different locations in a process plant.
***********************************************************
I have recently introduced a new course in Udemy to learn Pipe Support Design. If you are a candidate interested in improving your knowledge in one of the piping area, the below course would help you know and learn more about pipe support design in the piping systems.
To know the value of this course, please watch the briefing below:
• Pipe Support Designing...
Title of the Course : Become an expert in Pipe Support Design in Industrial Piping.
Click Below Link for Course:
www.udemy.com/course/become-a...
Current Offer for One Month ( Expiry on 31-AUG-2021) :
www.udemy.com/course/become-a...
**********************************************************
Contents that helps you to become piping design engineer:
How to become a piping design engineer in simple steps?
• How to become a Piping...
Step by step guide to become piping design engineer
• Step by Step Guide to ...
How to become an expert in Piping design
• How to become an EXPER...
5 habits to become successful in piping
• 5 Habits to become suc...
How to prepare for piping design interview?
• How to prepare for a P...
Must read books to become piping design engineer
• TOP 9 MUST READ PIPING...
*******************************************
Top Career making contents:
High paid jobs in piping engineering
• HIGH PAID JOBS IN PIPI...
How to systematically plan your career after graduation?
• How to Plan for an Exc...
Biggest mistakes to be avoided in career building
• Most Biggest Mistakes ...
Future of Piping design engineering career
• Is this an End of futu...
How to select best course and escape from scam?
• HOW TO SELECT BEST COU...
***********************************************
Contacts:
Join my Linkedin to for More discussion:
/ subash-chandran-v-1548...
Email ID: [e-mail]
Pymedaca is going to post video's with contents about the piping design engineering from basics to advanced.
For exclusive materials about design:
Visit: www.pymedaca.com
#piperouting
#pipingdesign
#pipingjob
#pipinglayout
#processpiping
#pipingengineers

[@sen-ow7ub]

Very clear explanations are given in this video. Create a series of parts like this and create a playlist and exclusively post more and more videos in it constantly and yours subscriber learn new tips every day.

[@nravimec]

good video

[@Ryohgantz]

Please continue all about pipe routing part 3. Thank you sir.

[@adarshbmp6447]

Was waiting for this video

[@pymedaca3130]

Sorry for the delay. Actually since too many people requested, I thought to share this first. But more such videos about many areas of piping will be coming one after other.

[@ramilionline]

Thanks a lot!

[@vipinbharambe4939]

Hello sir, Realy very heplfull for me this video

[@designerirfan6873]

Eagerly waiting for part 3

[@yelin808]

very clear explanation,thanks

[@Sid-fv2hw]

Thank you sir❤

[@prabhus5402]

Useful information sir Thank you sir

[@adnaanptl4470]

Good explanation with the animations.. make videos on Piping support stress critical lines and load ..if possible

[@vijayamale8029]

Very nice explaination sir

[@prabhus5402]

Wonderful video

[@ElementsBJJCanada]

Great video !♥️

[@prabhus5402]

Nice information sir

[@user-ze1yf1hr2j]

Nicely described.

[@mohsinshaikh1613]

Great keep it up 👍 please make video on equipment layout spacing

[@sophiamendoza5314]

Thank you

[@shankarkesua5274]

Thank you subhash❤

[@user-ti9uz9yg4p]

Hi sir these videos really helped me to get knowledge in routing, please add some more videos regarding pipe routing....

[@pymedaca3130]

I have launched Course for pipe routing covers all the areas. Check the link in the video description

[@rajeshm7568]

good

[@vipinbharambe4939]

Please make a part-3 for pipe routing

[@neyazsiddique3630]

i really really thank you sir

[@pymedaca3130]

Actually I was thinking about you while making this video. I know you were waiting with so much patience. Thank you being a genuine follower.

[@neyazsiddique3630]

@@pymedaca3130 to be honest with you sir ,every day I visit your channel and watching your video I m very thankful with you that, you made a video keeping me in mind Be continue for the next part 3 if possible sir I got lot of knowledge by watching your video Thanks sir

[@user-ti9uz9yg4p]

Please upload next parts sir.....

[@KM-un8ir]

Very good video and thanks for the effort you are putting in making all those informative videos. Those minimum distances you are giving at the beginning of your presentation (200 mm and 500 mm are they just common engineering practice or are they taken from a standard. If they are taken from a standard what is this standard? I appreciate your patience and feedback. Thanks again.

[@pymedaca3130]

Thanks for ur nice words. Those are known as good engineering practices inorder to ease operating feasibility.

[@user-ze1yf1hr2j]

If you set the video language as "english" in the option. Then automatic subtitle will be available. It will be very helpful sometimes, i think.

[@pymedaca3130]

Sure I ll include

[@mohsinshaikh1613]

Sir please make Piping routing part-3

[@Nature42248]

Sir, first of all thanks for sharing your knowledge.. I am Piping design field. Knows softwares like AutoCAD Plant 3D CADWorx and navisworks Manage..but worked in the designing side for Piping skids. But No plant level knowledge.after applying for new opportunities, no response is coming back .I think they are expecting more than skid Piping knowledge..can you please advice me on this.

[@pymedaca3130]

Hi Madhu, I can understand your condition. Ping me in linkedin and I ll give u good suggestions. Don't loose hope. Nothing s impossible.

[@usmaniaamir8637]

Sir please share pipie routing-3 video

[@vishnudileep645]

Sir, just wanted to ask one question. Does knowing Solidworks have any use in Piping sector.

[@pymedaca3130]

No dear. Piping softwares are entirely different. Check one of my video " How to become a Piping Design Engineer". Will help you.

[@vishnudileep645]

@@pymedaca3130 Thank you sir. Will check it👍

[@karthikvarma723]

Sir why control valve size is always one size less then line size.

[@pymedaca3130]

Yes it is. But it has nothing to do with piping. The sizing of control valve are done by instrumentation consider flow parameters. It cud be either less or equal. However it's not a decision made by piping.

[@aravindb3596]

Hai sir I'm passed out on 2020 BE-petrochemical I'm doing Piping design courses from Institute.. I'm looking for new job shall I take your udmey courses about support sir

[@pymedaca3130]

Yes. If you have a Piping Design basic knowledge, you can take and it would add value in your CV.

[@mkdailybhakti9553]

I have a knowledge of piping design ​@@pymedaca3130

[@user-xr8qx5bi3n]

Can you open translation from youtube

[@RambabuPuligedda]

Udemy courses link is not working?

[@pymedaca3130]

Course transferred to pymedaca.com

[@_md_khalith]

Hi sir! I'm B.E mechanical engineering (2020) passedout. Also completed diploma in mechanical engineering. I have interest in piping design sir. Please suggest me some one best software & institute in tamil nadu. Also tell me about job opportunitys in singapore , US, canada

[@pymedaca3130]

Hi Khalith, Thanks for messaging. Good that u have interest in piping. But I would like to know more about ur interest in piping to guide you in a better way. Please join me in my LinkedIn or email me to discuss further. I ll guide you.

[@_md_khalith]

@@pymedaca3130 pls accept my request in linked in

[@vipinbharambe4939]

Please make a part-3 for pipe routing