How much faster is our VW Golf GTI Mk5 with these mods? | PH Project Car Pt.5

[@PistonHeadsTV]

Watch the full series here: Episode 1 - kzbin.info/www/bejne/fHSXn5qEjKilbas Episode 2 - kzbin.info/www/bejne/jqrYlZR5epmMi80 Episode 3 - kzbin.info/www/bejne/bJa2mmCpgqaHl7s Episode 4 - kzbin.info/www/bejne/aZrQd4mcirWpmNU Episode 6 - kzbin.info/www/bejne/oJ-mkoWbq7J9nLM

[@mikemayers9353]

Would have been cheaper : used k04 with downpipe , used s3 intercooler . Done

[@mikemayers9353]

330 bhp

[@marcooconnor]

Does the GTI have forged rods?

[@johnday6188]

A k03 car isn't making 330bhp 😂

[@chrisgibson5523]

​@@johnday6188That's why he said used k04... The engine is more than capable.

[@graemewhitehead6233]

@@marcooconnorno.

[@nope.c]

K04 and a HPFP, and you should be at about 350hp.. well worth the money LSD would make a ton of difference too

[@stevemitchell8199]

Loving the build! As a Mk5 GTI Stage 1 owner who has pretty much the same mods (REVO intake, though the much cheaper and arguably “lower quality” Gravity downpipe, exhaust and intercooler), I can say one usually overlooked item is a new AC condenser. High mileage condensers take a lot of the road debris damage over the years, fitting a new one really helped overall airflow and cooling on my car!

[@albertonword]

Maybe with just a good clean on the AC condenser and all the radiators you could have a similar result?

[@IMattayy]

Should have bought a used K04 kit, s3 intercooler, vis internals and then let Rtech have at it with their k04 injectors, valves cleaned, runner flaps deleted, balance shaft deleted Would have been Easily 360bhp Whoever wins this car needs to get the valved walnut blasted, balance shaft free wheel and runner flap.delete to remove the major failure points of the tfsi

[@haroldbutler778]

Yes they are.. balance shaft is a problem in fsi timming belt motors. Also F23T can be had for 600. Not sure why they didn't buy that. They had plenty of money to do it.

[@StickyJamC]

Is this the same situation for the edition 30 BYD engine??

[@yama1463]

that hp is useless without a lsd

[@tomass.3908]

exactly!

[@rjhandley556]

I have a mk5 gti and am planning on making a few mods. found this video really useful so thank you 👊🏻

[@PistonHeadsTV]

Thanks very much! Hope we've been able to help 👊

[@SaltyOldBaldurian]

Literally a 15 minute Revo ad....

[@joshbanks6367]

My mk5 made 276bhp with just a sports cat and panel filter… it’s all about the map.

[@paulmichael3844]

What was the torque?

[@melaniezimmermann-jv7th]

Don't forget the dyno, it has big importance for the numbers...

[@nickacelvn]

This is by far the best looking version of the Golf platform.

[@10rGreenninja]

Good result BUT why no pre update. Dyno check to see the actual starting point?????

[@chrisrusted7292]

Just had my mk5 golf GTi mapped & made 302bhp, still k03 turbo but full 3' decat exhaust, ram air intake, S3 intercooler with airtec twintercooler RS4 return valve uprated fuel pump internals r8 coil packs, free wheeling balance shaft pulley, had the inlet walnut blasted, along with the handling parts like s3 brakes all round all the suspension poly bushed & lowered suspension would love to see how well it would do against the mk8 time

[@TheMjw123]

I have mk5 gti running a s3 intercooler,milltek full system with sports cat and a k&hardpipe induction kit,stage 2 mapped to 278bhp with a stage 2 Sachs clutch.

[@quantaccount4337]

Quite odd to not do dyno-run before changing all those parts. and before re-mapping (of course ideally with same temp, humidity, etc.)

[@kingGar27]

Agreed.

[@osmanjangir7225]

5th of November is a good day to be born on.. 🎉🎉 Great video good look to everyone

[@scotnicos5383]

this series has been fantastic - loved it!

[@PistonHeadsTV]

Thanks very much! Finale is just around the corner...

[@iandavies1893]

Going to be interesting to see how close you get to the R. Agree with some of the comments that using certain second hand parts would help the costs. Personally on the straights above 30mph you will give the R a run for it's money, but I think traction will be the limiting factor on a short curcuit. Looking forward to seeing the outcome. Still think your car is better looking than the R😊

[@JustinStrife]

I agree 100%. I prefer the styling of the mk5 over the 8. The mk8 is a great performer, but I have to root for the underdog mk5.

[@paulmichael3844]

Like everyone said should of gone for a ko4 upgrade turbo. My old mk6 gti made 280 bhp on a stage 1 at Rtec and that was very quick for 280bhp but still wouldn’t have the legs on a Brandnew R because the turbo is tiny

[@tubejorrit]

I have a mk6 gti, debating if I should go for the ko4 or stay with the stock turbo. I really like the midrange of the small turbo and I'm wondering if the punch stays the same with the ko4

[@reedymc]

@@tubejorrit the punch is awesome from 2000rpm+ ive got a ko4 on the one i bought it goes well. you will need the rest of the bits like injectors to get it ready for it.

[@jamesmedina2062]

@@tubejorritYou can also do a hybrid turbo from GPopShop in Arkansas or a custom build. You will need better injectors and new mapping.

[@LedSlinga]

@@tubejorritk04 is better at higher speeds while k03 spools up quicker at lower rev ranges

[@ahemgee9542]

Why did you dumb down the tuning aspect so much? Is this becoming a budget car wow? Ever heard of AFR ? A Used K04 turbo and LSD with HPFP as would've been better to properly finish the job. A remap, intake and sports cat is not exactly thinking out of the box.

[@sunsetgarage755]

As others have said, (and they’re quite right) you would have noticeably more gains with a simple KO4 upgrade (& it’s associated components) over everything you’ve done here. And the fact that you’re so budget conscious is even more reasons to do the KO4 upgrade that this base 147kW EA113 engine can quite easily handle. Considering the gains that an edition 30, Pirelli, or even the Mk6 R can get (all factory EA113 with KO4) once you start tuning, you are coming up way short of this engines safe tuning potential with the mods you’ve chosen. And yes I know this is not the exact same engine as the KO4 equiped cars, but a K04 & stage 2 tune won’t hurt this engine at all.

[@HOWYOUSEELIFEINCHRISTJESUS]

This is amazin, if I won this beautiful GTI it would help a lot with transport for my family, GOD Bless you all.

[@robpitt1095]

really enjoying the build, cant wait to see the gti against the golf r

[@Draxindustries1]

Re all these comments ' should have changed the turbo' , 'should have changed the engine' ect. This is just being done to obtain a little extra power from this particular car. Start swopping engines and you may as well just go out and buy the car its fitted to! In any case 273hp is more than enough from a 2litre and plenty enough for anyone to be using on heavily congested UK roads. Push an engine too far beyond its original hp rating and engine / clutch/ gearbox life will be vastly reduced...

[@PistonHeadsTV]

[insert 'THANK YOU' meme here]

[@ahemgee9542]

Didn't see anyone mention an engine swap, just the very common mods on the 2.0 TFSi , addressing the weak points - tuning it AND actually improving its reliability. People have been tuning these for nearly 20 years now. The k03 turbo 'd engines are limited in many factors and what they've down is not really addressing that. The Golf R will destroy it as is.

[@Danny61ll]

I always thought that the stage 2+ had to have uprated HPFP internals? Or did I miss something?

[@JustinStrife]

I assume the mk5 GTI FSI is the same as my 6R for the fuel requirements. Stage 2+ with the k04 definitely needs hpfp.

[@CR15PY1]

What if you just upgrade the hpfp internals stock haha with cold air , decat, larger boost pipes, turbo muffler delete

[@veg4life.]

Two till the end of the competition, fingers crossed, good luck everyone, happy Halloween and guy fawks night😊

[@libertasetpatrie]

cars like this is why i always tell my parents not to replace our 20 year old golf 5

[@tms977]

Still think it's work mentioning to your viewers that the parts and car having a $10k budget is great, but any decent mechanic is going to charge a far bit more to fit all those parts, significantly increasing the budget needed via labour costs

[@MrCaterhamr500]

Why would it be in dollars, it’s the UK?

[@racer247]

It amazes me how people have fake budgets, basically arbitrary if you have friends who will help for a few beers vs a shop that will nickel and dime you for everything. And notice how there are no setbacks that happen with every build. But as with any of these types of series, all will be finished on time, under budgets with results achieved. Counting Driver as Upgrade 😅🤣😂

[@anthonyambrose479]

Avoid the ‘friends n family plan’ . Pay the mechanic

[@soe50060]

How do that Militek exhaust fit into that Ebay box?

[@pgr3290]

No wonder I walked tuned GTIs when I had a Focus ST mk2 way back in the day. 273 horsepower and 300lb/ft after all these bolt ons? You got that from a basic map only on the ST, mountune cars were easy 270bhp and 300lb/ft with the MP260 tune and air filter. Full Induction, intercooler, exhaust bolt ons and map you were 300bhp and 350lb/ft torque on the stock turbo. It melted the stock clutch mind, but there was an easy upgrade everyone did....

[@JustinStrife]

They're limited by the size turbo. An mk6R comes with a k04 stock, add just a tune and it's around 300hp and gobs more torque.

[@JakobusVdL]

Interesting information from Luke about the standard airbox and inlet, also the adjustability of the ecu. Can you give us some insights into the upgrade options that were considered and rejected before setting on the Intake, intercooler. exhaust and remap selection?

[@DEEDrives]

POWER!!! Such a great car to upgrade best model be dub lost their mind 😂

[@jeryjohn]

To calculate hp you need to calculate drive train loss and add that to whp

[@joshmerrick4716]

I’m looking at buying a mk5 gti and I’ve been getting quotes for a stage 2/stage 2+ map Pretty much all of the companies I’ve spoken to have said they can achieve between 260bhp-270bhp with just a sport cat and cold air intake, and 270bhp-290bhp with an s3 intercooler and updated hpfp I’m surprised you only managed 270bhp with all that hardware and a stage 2+ map

[@ALLi503]

Why don t put the sound of the car ?We need to hear the noise of the mods !

[@mariuszanfir2298]

Where are the wheels on those _wheel_ horsepower?

[@marcgauduchon]

You forgot to show the hpfp upgrade needed for the stage2+

[@johnday6188]

And the rs4 fprv

[@dominikkozela9763]

7k for a mk5 gti is wild. Could have bought one for less than half

[@PA28Cherokee]

Someone can’t comprehend simple English well.

[@zankishii9961]

They said 7k after buying brakes and a couple mechanical fixes. You also don't know the milage, that heavily affects the selling price. I bought my 2006 premium package mk5 GTI for 6,000$ at 93k miles, that's a fantastic deal considering it's mileage and condition.

[@Bill__Murray]

What about the Hpfp?

[@HouseholdHusband]

puts new exhaust parts on, doesn't show clip of new exhaust note 🧐

[@richy69ify]

That's because it's an MOT failure. Showing off loud pipes will get them completely banned.

[@stumo8681]

Imagine what it'd be like with decent software

[@albun8172]

Can you guys set up my vw gti 08 I’ll let you guys take it so you guy can upgrade on my gti ❤

[@AndyVile]

Is a pvc delete a good idea

[@CR15PY1]

Is it? With catch can is it worth it

[@louisgreenleaf235]

Should have gone K04.

[@adrianculley458]

All this straight line speed malarkey 😂 gonna make that corner in the wet are ya 😂😂 get a R32 mk5 mate, miles of smiles

[@markgreen4455]

Looking good guys but those brake calipers look soddy get em painted properly

[@jamesmedina2062]

Sooty or shoddy??

[@Jacklang22]

Only made 270bhp on a stage 2+? 🤨 mine was on 140k had a intake and decat and that was it made 271bhp and 320ft-lb with a slipping clutch at Rtech. You’ve got a cooler and a uprated clutch should be in the 290’s bhp range easy

[@TheBLACKSkellington148]

R-tech dyno’s are lies. I bet yours is really 240bhp max.

[@euanbegbie]

Will Pip work on my car for free too?

[@irshaadahmadparker3665]

why would you not let your audience hear what this car sounds like during the dyno testing

[@ht1881]

Are we stripping out the interior?

[@anonimushbosh]

Did you forgot to include the costs to the individual upgrades? Could you add them into a pinned comment? 👍👍

[@iconboyy]

"nice to fit" while the entire front end is off

[@lucatronconi3558]

Don't lose your time only 1 upgrade k05 by Turbo direct SA in sud africa...best turbo for this engine..plug and play

[@rkiller56pbs44]

R32 rear conversation WORTH EVERY DOLLAR

[@ivanb3303]

Sooner or later the proof will be in the pudding

[@trethegreatestt9880]

There is no way all these parts came from eBay

[@andrewwright.]

induction kit is a complete waste of money on that car.

[@itzayekay]

Can i have the car please 🙏🏿

[@Elvis-yu3ps]

the series would be much better if you complete the project within a month..

[@elazotacunaos4752]

I love the comments. People claiming 330-360hp and totally forgot a differential 😂 This is not a car for drag races, the car needs to turn.

[@str8sawceentertainment373]

This mechanic clearly doesn’t know the mk5 platform mods 🤣🤣 fuel? U mean TURBO fuel pump internals

[@McBoomPow]

This is really not the way to do things. You dyno to base line. Then add a part and do another until your mods are fully installed. If not, you'll not know what makes power or is just bullshit. As usual Revo cover lines about "packages" your car isn't a Gran Turismo car. Staged packages are often just marketing. They could've done just the downpipe and the tune to get around that short circuit with little heat soak.

[@richy69ify]

what if certain parts work better together? You'd need to dyno different combinations.

[@McBoomPow]

@@richy69ify the base line is to do each part individually. Why? Because some things are cosmetic and don't change much in the way of power delivery. In most modern 2L turbo engines an intake will not deliver big gains if at all. Because the air flow is already optimised. Rather, having a bigger throttle body and inlet manifold will give more gains.

[@mrmrsread6154]

Why don't you shed some weight? Back seats out job. Should have saved some budget for some lighter front seats too.

[@PistonHeadsTV]

There's still one more episode to go...

[@6th.replicant577]

Disappointing, half-baked, rushed, sponsor-beholden Car Throttle rip-off. Very obvious PistonHeads’ current owner runs the show on an every-expense-spared basis. Which is a shame.

[@S1cari0]

Hmm very sad remap

[@PaulWallace-q6o]

Buying parts of ebay 😂 supplied foc more like

[@Tefloncoated]

Great idea but very wordy video for me.

[@winzfeld1]

Dumb. KO4.

[@mikemayers9353]

YOU LIVE IN UK WHY NOT GET TRACKSLAG !!!!!

[@rob_lightbody]

It's stupidly low.

[@fs0c1ety_bs92]

Bs

[@MrCaterhamr500]

Boring car, no matter what you do it’s still got the lifeless styling of a golf and is too heavy.

[@Birdy-by9cg]

I hate these car I don’t know why just feels cheap