pl162t Bianca opv adjustment

[@jojo7497]

Thanks you, see in the futur, but I guess you save me lots of money for simple adjustement. OPV and pump pressure adjustement works fine to resolve leaking problem. Big thanks.

[@sunwukong8069]

Hi, what size wrench to adjust the opv from bottom machine?

[@SASmiley]

should I empty the water tank ?

[@stefanb7529]

When using the blind basket and paddle fully open the pump pressure rises from 10 bar to 12 bar. Is there a problem with the pump bypass?

[@leibhaft6926]

So, if I drop the Pump pressure to 6 bar, is ist necessary to adjust the POV or is ist fine in stock setup, as the opv works as a safety?

[@lelitinsider2977]

if you need help send a video of the problem at [e-mail]

[@mhossen]

What is the reason you don’t want the OPV to be working when the blind basket is in? Where does the excess water/pressure go in this situation?

[@lelitinsider2977]

Hi, because in the rotary pump has the bypass and the water spin inside

[@mhossen]

@@lelitinsider2977 thank you. So what role does the OPV play, and when?

[@lelitinsider2977]

@@mhossen the opv valve works like a safety valve for the coffee boiler

[@yosefmizrachi]

Mauro hi! Can you please let us know how to adjust the OPV? Let’s say that I completely close it. How many 360 degree turns I need to set the right pressure for opv? Does it needs to be set to 12bar? Thank you

[@lelitinsider2977]

If you have to change the pressure during the extraction you have to change the pump pressure, not the opv pressure

[@yosefmizrachi]

@@lelitinsider2977 thanks. But I don’t want to change pressure for extraction. I have cleaned the OPV. And want to put it back correctly.

[@lelitinsider2977]

@@yosefmizrachi 1 set the pump at 12 bar 2 close the paddle 3 start the erogation 4 close the opv until there is no leaks at 12 bar 5 set again the pump at the value you want

[@barjee8965]

@@lelitinsider2977 Changing the pump pressure doesn't really do anything for the extraction pressure especially at finer grind settings, if there is adequate resistance from the puck it will go over the pump pressure and up to what the OPV is set too, kind of pointless and stupid really, why the OPV is set so high is weird, no one wants to extract above 9bar. Even if i do preinfusion with a finer grind the pressure far exceeds 9 bar even with use of flow control, again, pretty stupid for a machine of this price

[@Moepcore2008]

The Pump is so quiet of your mashine. Mine is much louder…

[@lelitinsider2977]

please ceck the fitting under the machine, if it touch the table it can be louder