Thank you for posting these instructional videos!!!
@LELIT_Official4 жыл бұрын
Thank you for following us!
@c199201185 жыл бұрын
Commentary on the film, thank you.
@LELIT_Official5 жыл бұрын
Hi! Pls specify if you other details. Thanks!
@thisismyday2873 жыл бұрын
Why so much machines came with a broken flow control valve? My machine was produced in September 2020 also had an broken flow control valve. You should investigate in it. My dealer sent me an new assembly.
@LELIT_Official3 жыл бұрын
Hello, we are sorry for the situation with your Bianca and we are sure your dealer will assist you to solve asap. Your message has been taken into consideration and sent to our technical dept. Thank you for your help. LELIT team
@thisismyday2873 жыл бұрын
LELIT Thx. BTW: This was in my new machine: www.kaffee-netz.de/threads/lelit-bianca.111771/page-116#post-1858357
@esculape14523 жыл бұрын
Mine too, I think someone’s doing his job wrong in lelit factory !
@shaned47102 жыл бұрын
@@esculape1452 mine too
@FRWAN20125 жыл бұрын
I bought bianca one week ago, should I replacement the regulator?
@LELIT_Official5 жыл бұрын
Hi, absolutely not, your machine is new and the flow regulator doesn’t need to be replaced. Thank you!
@hariswiranata98943 жыл бұрын
My bianca only hold pressure at 10 bar, cannot adjust manualy, and water keep coming even the paddle i turn to left. Is it because of this one??
@LELIT_Official3 жыл бұрын
Hello, in this case it's better if you send a video to care@lelit.com showing the paddle situation. Thank you! LELIT Team
@Kats072307 Жыл бұрын
hi Lelit. My Bianca v3 (a machine that I own for 10 months only), yesterday "lost" the correct flow. So, right now, with pedal fully open, it gives me 2.2 ml water (instead of around 6.5 ml), so less water coming through, and the pressure while brewing goes max to 4 bar on the head. While the machine itself is running at 9 bar. Why did this happen ? I will try and follow your instructions to correct things
@LELIT_Official Жыл бұрын
Hello, we invite you to send a photo of your product data label, a copy of your purchase invoice and a video showing the issue to care@lelit.com, our Customer Crae will be ready to support you. We remain at your complete disposal. Thank you, LELIT Team
@Kats072307 Жыл бұрын
@@LELIT_Official No need to do all these things guys. I simply unscrewed and fixed the flow. I just don’t understand how it lost settings itself. It happened for first time and I hope this problem will not be repeated
@LELIT_Official Жыл бұрын
@@Kats072307 Hello, we are happy to hear you managed to solve the issue. If you need support, you can send an email to our Customer Care. We remain at your disposal. Thank you, LELIT Team
@cultify59622 жыл бұрын
Hello Lelit, do you have any idea why my Flow Control unit of my Bianca is very hard to move while i brew espresso? Everytime when the chamber in which the flow control unit is installed is full with water the paddle is hard to move. After ending the shot the paddle runs smooth again when the chamber gets empty. No broken needle and no broken gicleur, everything is intact. Do you have any idea whats the issue here?
@LELIT_Official2 жыл бұрын
Hello Cultify, thank you for you feedback. We kindly ask you to send an e-mail to care@lelit.com, so that we can support you in the best way. Please, attach a photo of the data label that you can find under the base of your machine and a short video in order for us to better understand the entire situation. Thank you, LELIT Team
@samuelecartillone7327 Жыл бұрын
Hello. I Need to buy a new flow regulator. Where do I find this article?
@LELIT_Official Жыл бұрын
Hello Samuele, we invite you to contact one of LELIT authorized resellers in your country: lelit.com/lelit-worldwide/. We remain at your disposal. Thank you, LELIT Team
@audiavil3 жыл бұрын
where is this guy in the new videos? I like him :-)
@LELIT_Official3 жыл бұрын
Hi, he is not part of our team anymore but thank you for your feedback. Take care!
@cyclo09162 жыл бұрын
This kit can be used on Mara X?
@LELIT_Official2 жыл бұрын
Hello, the water flow control has been created and intended for LELIT Bianca. For a different placement please check technical details with your direct reseller as this is not a standard piece for MaraX. Thank you! LELIT team
@abbasmuhanna Жыл бұрын
Hi, after 2 years used Bianca the flow rate is 320 ml/30 seconds with full open paddle before was 230 ml/30 seconds why??
@LELIT_Official Жыл бұрын
Hello, we invite you to send an email to care@lelit.com attaching also a photo of the product data label, our Customer Care will help you in case you need assistance. Thank you, LELIT Team
@abbasmuhanna Жыл бұрын
@@LELIT_Official I sent it in your email
@dastealth06462 жыл бұрын
Hi Lelit, I've had my Bianca for over 2 years, which has been fantastic. Recently the flow control valve failed due to the mushroom valve de-threading. I've searched for a replacement part for the mushroom nut only, unfortunately my distributor and others only sell it in the flow control kit, which is very expensive and unnecessary. Can Lelit provide the mushroom nut as an individual part? So I can use this signature feature again. Thanks.
@LELIT_Official2 жыл бұрын
Hi, LELIT offers the entire flow control kit only. And this needs to be used entirely, meaning that you will need to replace all the parts included in order to ensure a good performance of your Bianca. Thank you for asking! Take care! LELIT team
@shaned47102 жыл бұрын
@@LELIT_Official This just happened to me as well. Please work to correct this issue.
@LELIT_Official2 жыл бұрын
@@shaned4710 Hello, LELIT recommends replacing the whole kit in order to ensure the ideal functioning of the machine. We kindly ask you to contact your reseller to verify the availability of the part. Thank you, LELIT Team
@ryanamesch Жыл бұрын
@@LELIT_Official I just got a new V3 delivered yesterday and it came broken. How is this still a problem 3yrs later!?
@LELIT_Official Жыл бұрын
@@ryanamesch Hello, we kindly ask you to send a photo of your product data label, a copy of your purchase document and a video/photos showing the situation you are facing to care@lelit.com. We'll support you from there. Thank you, LELIT Team
@ciruscoffee42902 жыл бұрын
Hi, can i install this on my Mara X? Thanks
@LELIT_Official2 жыл бұрын
Hello, the water flow control has been created and intended for LELIT Bianca. For a different placement please check technical details with your direct reseller as this is not a standard piece for MaraX. Thank you! LELIT team
@TheShmax9114 жыл бұрын
Where can I buy just the paddle?
@LELIT_Official4 жыл бұрын
You can buy it part from your local Lelit reseller. Thanks!
@abotmeem3 жыл бұрын
Hi , what is the size of the GICLEUR for Bianca I mean the hole in middle of it ?
@LELIT_Official3 жыл бұрын
Hello, the hole is 1.5mm and it is made though a specific precision machine. We suggest not modifying it autonomously. Take care, LELIT Team
@LELIT_Official3 жыл бұрын
@@flavioinzunza Hello Flavio, our CARE dept has replied to your messages, we suggest you continue with CARE dept to find the best solution to your situation. Thank you! LELIT team
@camagears Жыл бұрын
how can we find out it needs a change?
@LELIT_Official Жыл бұрын
Hello, we kindly ask you to send an email to care@lelit.com attaching a copy of your product data label and a copy of your purchase invoice, they will be more than happy to support you. We remain at your disposal. Thank you, LELIT Team
@suatulutas59595 жыл бұрын
Could you explain technical data? Does it increase water flow 12ml/second? Whats the range? 0-12ml/second or 6-12ml/second? Can i send this video public forum?
@LELIT_Official5 жыл бұрын
Hello! Do you already have a Bianca? Have you found the infos listed above? Thanks!
@gaagail5 жыл бұрын
Hi as I know 113mm in 12 second for E61 grouphead.
@suatulutas59594 жыл бұрын
Lelit Espresso yes i have lelit bianca for 6 months
@abbasmuhanna Жыл бұрын
Hi, I need the dimensions of filter screen of gicleur bianca? The size??
@LELIT_Official Жыл бұрын
Hello Abbas, we are aware of the fact that you are already in contact with our Customer Care. If you have technical questions, we invite you to remain in contact with them, they will be more than happy to support you. Thank you, LELIT Team
@oscarbarajas44983 жыл бұрын
Has this been fixed on the new updated machines?
@LELIT_Official3 жыл бұрын
Hello. Yes, the flow regulator works correctly. Thank you for your questions. LELIT team
@ryanamesch Жыл бұрын
Nope. Just got a new machine yesterday. Valve came broken in half.
@jojo74972 жыл бұрын
Only two years and a half of use, and the padle control is already broken : ( It seems that there is a spring who brok inside the srew who control the pressure. So there is no more control flow, all is open. And the cost to change that is really expensive, for how many times before needed ton change it again? Really disapointed for a 2000 euros expresso... Specially when ou just need one piece. I have picture to show where the springs broke, it can not maintain the pressure so the paddle move up.
@LELIT_Official2 жыл бұрын
Hello, we are really sorry you are facing a problem with our machine. We kindly ask you to contact our Customer service at care@lelit.com sending a picture of the paddle and the tag with the serial number under the base of the unit (or on the original packaging) we will assist you from there. Thank you, LELIT Team
@jojo74972 жыл бұрын
@@LELIT_Official thanks, I 'll contact you.
@scider23 жыл бұрын
I heard in another video (kzbin.info/www/bejne/Y4W8f6SAn9SUh8U) that when turning the flow off it shouldnt be totally stopped, should still come little water. What is your view of that?
@LELIT_Official3 жыл бұрын
Hello, you can use the machine with the flows that stops while closing it, or you can use the paddle and and let some water out. They are two fifferent mode of use but both of them are valid. Thank you, LELIT Team