Nice video using the cut away of the pump. Great work cheers from YYC
@atuljangir56013 ай бұрын
Hindi main bataye please
@mhossen3 жыл бұрын
Always useful Mauro! Thanks
@dcippitelli7 ай бұрын
Questo e stato molto utile, grazie dagli Stati Uniti!
@andersmllernielsen493210 ай бұрын
Thanks! Helped me out with my Bezzera Mitica Top
@lelitinsider297710 ай бұрын
it is a pleasure!
@user-ey3in5vl5w8 ай бұрын
Thanks! Do you have a video on removal and cleaning of the rotary pump? As it is a common problem that the OPV get stuck and the adjustment screw wont do anything anymore. Thanks!
@lelitinsider29778 ай бұрын
if you have the bypass video you can remove the bypass (not all the pump) like in this video
@marcossombrero81897 ай бұрын
Thanks mate for this great Video 👍
@Jerryxie88 Жыл бұрын
Hi Mauro, just wondering where can i get the spare part of that adjustment screw which you took it out at 5:54 in the video?
@lelitinsider2977 Жыл бұрын
you have to ask to the releller in your country or try this lamacchinadelcaffe.com/
@25ale52 Жыл бұрын
I have noticed on my bianca v1 when setting the pump pressure whit closed paddle, the pressure increase 1 bar higher when the paddle is open. Same thing when pulling a shot: at first the pump is on 9 bar, but after the pressure in the grouphead has reach his maximum the pressure of the pump goes on 10 bar. Do you know why? And which pressure is the relevant one for the shot? First or second?
@lelitinsider2977 Жыл бұрын
The importan is the pressure on the grouphead, the other shows only the pump pressure
@alexisreyes3346 Жыл бұрын
nice video! did you recomend the phillips 66 grease for food machinary? is H1 NSF
@lelitinsider2977 Жыл бұрын
Sorry, but I don't know this grease,
@stefanb75298 ай бұрын
I noticed pressure increasing on my Lelit Bianca, so I screw the valve out a bit for decreasing pressure. Then it only shows 7.5 bars pump pressure with paddle fully opened and around 10 bars with closed paddle or blind basket. Now a few days later pressure increases again, but only with closed paddle or blind filter basket up to 11.5 bars. Pump pressure stays at 7.5 bars with fully opened paddle. I think there is a regulation problem with the bypass, same problem as shown in the video?
@lelitinsider29778 ай бұрын
yes, it can be the bypass,
@stefanb75298 ай бұрын
@@lelitinsider2977 Update: I removed the bypass completely as shown in the video. The plastic part with the o-ring wasn't blocked or tight, only a little bit limescale, I cleaned it and put a bit of silicone grease on the o-ring. Didn't solve the problem at first. Then I also removed the rear plastic part with the spring in it and I noticed immediately that it was very very firm. Took some time to get it out. I give all a good clean an reassembled everything. Now it works. Solved the problem.
@lelitinsider29778 ай бұрын
perfect! if you need it is possible change only the bypass! @@stefanb7529