Place the Spark Plug into the Electric Soldering Iron and Admire the Results

[@stevehaynes2857]

Wow! He turned a soldering iron into…… well, a soldering iron!

[@samspade4050]

If you didn’t grasp the concept of what he did then please do everyone a favour and stay far far away from tools before you hurt someone

[@MikeNel33and49]

Soldering iron companies are discouraging electronics in USA.I learned professional soldering on gov projects using alloy tips and good solder no pitting on tips and little crud copper tips disinaagrate, and look at the suppliers they're making money with junk!!!Names like Unger were good and antex

[@GettingNervous]

@@samspade4050 What he did is stupid. He should learn how to solder properly instead of showing such ridiculous nonsense.

[@clarencegreen3071]

@@GettingNervous To look at this in a slightly different light, he has 387k views in 6 months. That' will bring in some of that sweet youtube money!

[@GettingNervous]

@@clarencegreen3071 And 3,120 likes prove that there are at least 3,120 stupid people.

[@koshaz3x]

For the soldering iron, I recommend to you, to use flux, there should be no problem of cold soldering with it.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@speedfreak8200]

I've been fluxed up since junior high.... if you remember the 70's you weren't there 😂

[@thorin693]

Turn the iron on and tighten the tip. Smooth ceramic will not sharpen anything.

[@djvivian-acidpro]

589K subs....much better than 2...

[@creationholic101]

Thank you for watching

[@speedfreak8200]

No, but rough ceramic sure will.

[@carlosarmas4287]

Con el tercer episodio has puesto en peligro tus dedos Gracias Te veo desde Zaragoza - España

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@بهمنآذر-ث3ف]

Hello my teacher... I am from Iran. I am proud of you.. I really enjoy it. good luck❤❤❤❤

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@خفايا5]

سلام پویا جان . هموطن گلم صادقانه دوستون دارم

[@herbertvanrensburg6411]

I always used an old ceramic saucer for sharpening scissors, your idea looks more efficient, thank you. Never cut toward yourself when using a knife, it could lead to some serious lacerations, an easier method of cutting notches would be to use a bench grinder, an angle grinder, or even a file. Instead of trying to tie a knot into your cotton, simply wind it stiffly around the wood and then apply some super glue whilst still holding the end of the cotton in your free hand, once the glue has been set, cut the loose strand off.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@alejandrosakaripa8389]

Gracias por las ideas creativas y solucionador as de problemas de trabajos te felicito.de Venezuela

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@nimalsandunsiri4024]

That's a good idea Jaya. I am from Sri Lanka. Like to make use of a lot of things that are thrown away.Thanks🙏❤️🤝

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@nigelwhitehorn5423]

Well that’s 6 minutes of my life I won’t get back!

[@speedfreak8200]

Me too, Sparkman

[@creationholic101]

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

[@RadekKrivohlavy]

Tak 77 777777​@@speedfreak8200

[@AmazingSmart-ngth]

Thank you for all these great tips. Keep these ideas coming. Great video.

[@BarriesBarnard-q7m]

This explains the term "full circle". From a perfectly able soldering iron to waddaya know a working soldering iron, by simply changing the tip.

[@creationholic101]

Thank you! Cheers!

[@Mrinventor93]

Ideas inteligentes, Buen trabajo bro gracias por compartirlo

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@chammuoi2475]

Mài kéo kiểu này để dùng tạm thôi = khi cắt nó không giữ được vật thể ,kéo bị trượt ,xu hướng lui lại ...mặt vát tiếp xúc vật thể không được nhẵn trơn .Khi cắt vật cứng ,khó cắt người ta còn làm cho mặt kéo nhám ( như kiểu răng mịn ).Kéo bị mẻ nhỏ sẽ bám vật thể rất tốt ,nhưng vết cắt xấu và kéo nhanh hư thêm ..có lợi và cũng có hại đó

[@creationholic101]

Thank you for sharing your feedback

[@user-tv6vn4kd8jALi]

افكار مفيده) احتاج الى عمل محول كهرباء صقير لتحويل لمبه منزلية إلى ١٢ فولت ليعمل مع بطارية السيارة ) أعجبتني أفكارك

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@twinwankel]

I guess I don't see the point of spending that much effort to remove the center electrode to hack a soldering tip when you can make one with something like copper wires.

[@creationholic101]

I used this part of spark plug because it has high thermal conductivity.

[@user-tsurupetadaigiii]

スパークフラグと半田ごてを合体させるなんて普通の人には考え付かないと思いますよ あなたは素敵なクレージーです

[@viorelpopescu4990]

Treba Pachistan ha, ha, ha

[@CarlWinter-oy8uf]

Wow--maybe that Platinum Nickel and Indium SPARK PLUG --tip will help improve this really lousy soldering iron tip I have that refuses to tin & solder properly --a real nuisance--I need to solder without any drama ---thankyou for the idea --I will definitely try it !

[@creationholic101]

Thank you! Cheers!

[@MetinTetiker]

Sayın Arkadaşım.İyi niyetli,güzel çalışmalarınız ilgiyle izleniyor muhakkak.Ben sadece bu paylaşımda buji ile cam kesme doğru bir uygulama değil.İster çok yeni,isterse çok kullanılmış elmas olsun cam yüzeyinde tek çizgide görev yapmalıdır.Cam üzerinde git gel olmaz diye düşüncemi paylaşıyorum.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@carlosreys9]

Boas ideias Obrigado por compartilhar.

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@KefrenElectronica]

Si se necesita mas temperatura hay 2 caminos: 1: introducir a tope la punta original/o normal. 2: utilizar un soldador mas potente. La seguridad y confiabilidad ante todo(durabilidad de herramientas y materiales)😉

[@samuelabraham7306]

I tried it, it did work.

[@creationholic101]

🤗😘

[@markludington887]

Buy a TS101 Soldering Pen with adjustable soldering temp. Heats to useful temp in about 10 seconds.

[@cleitonakaspyda]

do u think this is a video for someone that can buy anything....it's like saying be smart to a dumb person....

[@creationholic101]

Thank you for watching

[@sarjitnijhar5337]

❤Thanks for such ideas. Good it improves me.Fr Malaysia ❤❤❤❤

[@creationholic101]

You're welcome 😊

[@jarbas3022]

Brasil Achei muito bacana!!!!!!!!!!!!!!!!!!!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@arceniozambrano]

Estupenda idea, tengo problemas con mí soldador, lo pondré en práctica.

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@lauramaihua]

hola soy de Villa Mercedes. (San Luis)me gustan todos tus vídeos

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@kamelkamel5207]

جيد...تحياتي من تونس......جربت الفكرة ممتازة

[@creationholic101]

Thank you! Cheers!

[@ivohpineda]

thanks a lot for your tips, from Mexico

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@alaaaboahmed4563]

الله ينور عليك يا هندسه ربنا يكرمك ويوفقك ويرزقك ويسعدك يارب العالمين

[@creationholic101]

Thank you! Cheers!

[@gilwillette4543]

From New Hampshire USA

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@EmpathyStories86]

Good Idea. I love to see how you do

[@jerzypielarski2115]

Genius! He turned very good into very bad. Learn to solder using soldering paste

[@creationholic101]

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

[@خفايا5]

Good job my best friend . U r amazing coach . But plz be careful dont hurt urself . I love you ❤

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@AscanioBorsato666]

Wonderful. Im from Italy

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@brazisouf]

شكرا على المجهود.. من الجزائر

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@aydnaydn2558]

Güzel iş güzel emek teşekkürler,🇹🇷

[@creationholic101]

Thank you! Cheers!

[@alihaghani67]

آفرین . ممنون . من مدتهاست با لحیم کاری مشکل دارم . امیدوارم که جواب بده . اون وقت بار ها و بارها دالتون میکنم . علی از ایران اصفهان 🙏🙏❤

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@jacka492]

Bravo très astucieux 👍👍👍👍de FRANCE

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@bertrandanctil6897]

Bonne idée! Merci.

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@arceniozambrano]

Servirá también para afinar tijeras ✂️ de barbería.?

[@CarlWinter-oy8uf]

What type of steel /metal-- has he extracted from that spark plug ?---is it copper or high carbon steel --he is using as a replacement soldering tip on the iron ?

[@creationholic101]

Platinum, Nickel and Iridium alloys.

[@adriantoobe9782]

Estoy enamorado de este canal 😍

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@jamesmaybury7452]

I’ve learned that you can’t cut spark plugs with scissors, you need an angle grinder.

[@creationholic101]

Thank you! Cheers!

[@jackhackett6827]

ALWAYS KEEP YOUR HANDS BEHIND THE BLADE !

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@skeltane]

This is a joke, right? Well, there goes six minutes of my life I won't get back.

[@creationholic101]

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

[@Thawee-sj3pr]

สุดเจ๋งจริงๆครับ 👍

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@leonwatts1420]

I would have just buy a new tip or clean the old one 😂😂

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@aros007z]

Awesomeness

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@tipsunknow]

hello! how are you?

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@pdanayal]

Nice idea.

[@creationholic101]

Thank you! Cheers!

[@OhpaOhpa-t6b]

very good , thank u much.

[@creationholic101]

So nice of you

[@gregoryhouck5738]

Your soldering trick didn't work because of the changes you made to the iron but rather because you acctually tried to solder it correctly after the changes.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@SICARIO76]

Hello from Greece 😎😎😎😎😎😎

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@andybutler2291]

I was waiting for him to use the shards of ceramic insulator in DIY dentistry ...

[@creationholic101]

Thank you for watching

[@Gesse-r9v]

I am from Brasil sp state

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@thanapatrachartburut513]

ปลายหัวไนท์เขาก็มีขายอันละ 17 บาทเองนะครับ

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@johngayder9249]

A word to the wise: never smash spark plug porcelain near a vehicle. Porcelain and safety glass do not mix!

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@MikeGervasi]

Wait till someone tries that with tempered glass.

[@creationholic101]

Thank you for watching

[@Rais926]

Wow amazing

[@creationholic101]

Thank you! Cheers!

[@speedfreak8200]

Brought to you by the Clicky Baity Channel 😂

[@Mr.ky89]

Bugi rất tuyệt vời nếu biết cách tái sửa dụng

[@creationholic101]

exactly

[@user-dani54]

سلام بسیار عالی 🎉

[@creationholic101]

Thank you! Cheers!

[@BZE-dt6di]

Video for clickbait only. Ignore this author.

[@robertpotvin8872]

for the scisors,cut a piece of sandpaper instead,lol

[@robertpotvin8872]

the heating element will not last ,not anof surface for the eat to transfer to the tip,,,,

[@salomonhernandez3289]

No entiendo para que malgastar el disco? Solo con romper la losa salía el electrodo?!!?😮😮

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@dangermouse2235]

Just when I thought Id seen it all...

[@creationholic101]

Thank you for watching

[@bekirozcelik139]

teşekkürler

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@curdor6758]

Pourquoi ne pas réduire l’épaisseur du bec du fer à souder avec une meule. Au lieu de casser un bougie et retirer la barrette

[@creationholic101]

The spark plug tip conducts heat quite well

[@FernandoVicenteGomes]

Garanhuns Pernambuco

[@bmwn1954]

ممنون ازت ،خیلی طولانی میکنی ویدئو رو

[@creationholic101]

Thank you! Cheers!

[@taperebabeleidodo859]

❤❤❤❤❤❤

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@waltermanrique2271]

soy de mauritania

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@georgeh9967]

just use a soldering tip, they are cheap. and put solder on it next time. what a stupid waste of time.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@Bilaljan8970]

good

[@creationholic101]

Thanks

[@joseleonardoleonardo9826]

Eu sou do Brasil

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@juanpolainas190]

I'm from Tijuana baja mexico & U?

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@tac_kane]

I expected how to renew old spark plug...

[@creationholic101]

Thank you for your feedback. I will think about a solution to this problem

[@rong4189]

Why is the grinder spinning so slowly?

[@creationholic101]

due to the recording speed of the camera

[@rong4189]

@@creationholic101 oh of course!

[@Aldd960]

Basim Alharbi from Baghdad

[@juanbiope]

ojo el cautil esta con la punta mal ajustada

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@philipbrougham6360]

Have l missed something here ?

[@peachsncream5808]

4:02 lol , why not cut down the pop rivet as it was and use that rather than wasting all that time with the spark plug 🤦🏻‍♀️ that’s what I have been doing for years , and it so just fine . If you want too be really fussy - you could use stainless steel poprivits 🤷 .

[@creationholic101]

I used this part of spark plug because it has high thermal conductivity.

[@peachsncream5808]

@@creationholic101 I understand that is true - however I believe the overall result was more likely a coincidence , considering how thin the spark plug tip was , by the time you had Finished the modification - I think a side bye side test would show - That the same result would have come from using the cut dawn poprivit . 🤔

[@robertpotvin8872]

take a piece of that ceramic ,throw it at a door car window,,watch what will hapene,,n,b,better do this on a scrap one,🤣

[@tukangngirit58]

one item with three extraordinary functions 6:11

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@hoagiesan]

Please tell me this is serious and not intended to be humor!

[@creationholic101]

Yes, this is serious

[@IraqMeo]

السلام عليكم انا منالعراق

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@r.catton8731]

The original problem of the soldering iron was the screw was loose to begin with.

[@SkunkPunch73]

Hahaha you realise you wrote that and everyone can see just how daft of a person you are no offence intended to you but you did write it.

[@michaelkennedy2528]

Then he nearly burnt the other wire in half next to it.

[@MikeGervasi]

Actually the problem was the iron was cold. Also didn't tin the iron with solder like he did with the new "Tip".

[@SkunkPunch73]

Problem is people removing your comments because they can’t take getting told they’re a bit dull!!! I wonder how long this one will stay up for before it gets removed 5 or 10 minutes. The screw does absolutely nothing apart from stop the soldering tip from falling out and has absolutely nothing to do with heat transferring from the iron to the tip! What are we actually going to do if we have a global disaster with the sort of people and knowledge that they have got in their heads!! Humanity as a species is doomed with geniuses like the original poster of this reply left to replenish our species 👉🏼🤤💨🧠

[@creationholic101]

it's really effective you can try it

[@walter6574]

Poor soldering technique. People who don't know how to solder bring the solder to iron, let it melt and then bring it to the point where the soldering needs to happen. That burns the flux away. Solder without flux will not give a good permanent soldering connection. Just saying.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@superlio100]

lo de la soldadura es tonteria lo que a hecho que se suelde es porque puso estaño en la punta en hacer contacto con el otro estaño que no se ablandaba antes. Hace que se ablanda igualmente en hacer contacto con el estaño fundido y no la punta del soldador

[@JoeyMarshall-hp8hj]

Central florida

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@Hassan7tz]

Fake soldering iron was changed

[@creationholic101]

Sorry, I share the actual method I did, you should try it and feel the effectiveness it brings

[@davebayliss2278]

Flippin heck....just go and buy a better soldering iron tip.....pennies !!!!!

[@creationholic101]

Thank you! Cheers!

[@peachsncream5808]

1:14 unless I see the scissors in the same frame = with out the unnecessary offscreen Segway to the plastic bag . I’m calling bullshit on this one The ceramic of the spark plug is not only rounded But also has a tuff glazed surface that is unlikely to be capable of sharpening anything as is . I am going to try this tomorrow . If I’m wrong I’ll be back to apologise . If I’m Wright ….I will be back tomorrow too confirm my suspicions. Crazy Ozzie OUT 👣. I WAS / AM WRONG IT WORKED 🤦🏻‍♀️ my apologies for my negative comment .🙏

[@creationholic101]

I had done it and it has real sharpening effect. I would love to hear your feedback after you try it out.

[@peachsncream5808]

@@creationholic101 will do 👍

[@peachsncream5808]

It works 🎉

[@MsKinnara]

On the 2nd one it would have been easier and quicker to just TIGHTEN the screw holding the tip in instead of making a makeshift tip from the spark-plug. YES Everyone that watched saw the soldering tip was LOOSE so it wouldn't work.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@AliFırat-c7w]

Türkiye van

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@armeniosilva8739]

O KZbin deveria proibir certos videos

[@hafdallahabdelhafid6752]

🇩🇿

[@jeffbrassard1268]

Dullest cutoff wheel I have ever seen.

[@creationholic101]

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

[@GettingNervous]

Rarely have I seen such incredible nonsense.

[@creationholic101]

It's very good, try it and feel it

[@KefrenElectronica]

Es una total tontera e ignorancia Al colocar una punta mas corta se concentra la temperatura al mismo tiempo que se va quemando la resistencia por exceso de temperatura interna sin disipar ya que la punta normal hace de disipador termico

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@viorelpopescu4990]

Corect si cu logica