Plans for RC Aircraft Masterclass | Part 1 - Where to find and how to print and make plans?

Plans are the master templates of our design, they are a medium to take our idea to the final machine, in this video we'll explore all you need to know about plans for RC model airplanes.
Part 2 • Plans for RC Aircraft ...
Relevant links:
AutoCAD autode.sk/2kOPhNm
NanoCAD nanocad.com/products/nanoCAD/
LibreCAD librecad.org/
Plans - aerofred.com/
outerzone.co.uk/
▶ Become one of us:
goo.gl/zKQ706
▶ Facebook
/ joyplanesrc
▶ Instagram
/ joyplanes
#JoyplanesRC #HobbyRC

[@antoniss5038]

Thank you for you videos. they are very informative. FYI Autocad asks you for documents to verify that you are a student, otherwise it gives you a 14 day trial Keep up the good job you're doing

[@yaclk4985]

I was just looking for this. Thx for vid

[@karthiknadam2067]

All of the vedios are excellent and best for beginners

[@DadsRCHangar]

Really great information. Not sure I have that ability to design. But interesting to know 👍🏻

[@ravebrave8866]

I use dot matrix printer to print the plans.. on a A3 continues paper without break.. works great...

[@thecelt4807]

awesome man ..great content

[@sashasavic8324]

Thank' s to share this info

[@antoniwojcik3718]

Great movie

[@nickanrc]

Nice video and how to use DXF or DWG plans explanations are very clear! The only point is that nanocad isn't free... 😟

[@hondaxl250k0]

I’ve got boxes of old plans and full kits ranging back too the 1940s

[@abdulrazeqnaroei7087]

👍 good

[@doglegjake6788]

Thank you for sharing a very, very good video !

[@papercrafts223]

Hey pls what software did you use to edit the structure

[@eugenedekock9428]

Hi, I have the Tiger Moth Plan 70' Span 90 Size by Farooq Ahmad. It's a very detailed and easy to read plan. But as a newbie, I don't know how to scale it to the proper size. And I don't have AutoCad to do so, is there perhaps other ways to it? Your help will really be appreciated thank you in advance.

[@anichhatre]

Great explanation, Please make video for how to import PDF plan and make Lasercut ready plan out of it.

[@IsaiahBaker]

Gold

[@iwakeimidis]

I made an joy plane trainer 😁😊😊

[@JohnDoe-qg6hm]

Hey guys, Thinking about building a model aircraft for the first time. Looking for a little advice to get started. Ive a few of the basic tools, Scroll saw, Bandsaw etc. I have a good selection of woodworking tools in general. Im specifically looking for a good set of plans for a beginner to try ! Hope you can help.

[@mostgrossdanger04]

AeroFred mate......1000's of plans all free

[@daviddavids2884]

some info. all of the people who have made a zero-dihedral wing, are flying a non-typical wing. it can be Seen that MOST full-size prop-powered aircraft HAVE a dihedral wing. sometimes (see the piper j-3), the design of a straight wing, outboard, results in a dihedral effect. googletranslate www.the-blueprints.com/modules/vectordrawings/preview-wm/piper_j-3_pa-11_cub.jpg airwar.ru/image/idop/fww2/a6m5/a6m5-1.gif

[@johanopperman8039]

How can I get these plans on my laser cutter software.

[@guidogiuliani8096]

You have to check the scale that the plans are in to

[@joetalarico7144]

Do you have Widgeon plans

[@lala-fh2vv]

กำลังจะสร้าง

[@Bzl_777]

Brother you shared exactly what I was searching for so long thanx O want to draw my own design and get it laser cut I want to know which software should I learn and use Currently I am using sketch up and fusion 360 Sketchup is very easy buy I find it difficult fusion 360. Is autodesk fusion 360 is the right software for drawing plane and get is laser cut??

[@Joyplanes]

Hi, for laser cut I would prefer AutoCAD or a similar CAD software. A free CAD software I recommend is nanocad.

[@Bzl_777]

@@Joyplanes brother if u get time please check Autodesk fusion 360 it also a cloud based cad software. Will it be suitable for laser cutting rc plans. Thanks

[@darkshadowsx5949]

fusion 360 is good for architectural design and other CAD work. its pretty easy to use, and not hard to master. I used sketchup for about 5-6 years and i find it tedious and annoying to use compared to F360. sketchup makes me want to bang my head on the keyboard. its stupid how they setup the method of doing curved surfaces and kinda hard to do anything complex in. i actually been making an airplane frame in F360 as i want to be able to 3d print one instead of gathering balsa or at least before. i was also thinking of using the 3d printed parts as a template for trying the frame in foam board to see how that holds up. fk autocad and freecad its just as bad as sketchup. just sit down and bang it out with F360 until you realize how much easier it is to use.

[@professorreedmatt6054]

How to calculate how many ribs are required for a wing

[@Dashone93]

How can u laser cut prints to files for laser

[@jeffmercer8364]

Can I still use the auto cad for free if I’m not a student

[@0623kaboom]

for 14 days ... with extreme limitations ... in otherwords ... if you dont own a copy of autocad ... dont bother downloading it ...

[@mateuszgrabowski755]

Grabowski !

[@daviddavids2884]

at 16:40 huhhhhh. ????? 1/16" equals .062 inches; equals 1.58 mm the end

[@ahmedshoodhe4516]

Is it posible to done this work in my phone

[@luckyduck3594]

no

[@PhoenixTwoFiftySix]

pdf is stored as .pdf files, and vectors are stored as .svg, internet rc enthusiasts.

[@ashutoshkumar5035]

Can anyone please share me baron b55 pdf plan

[@sotm6078]

You did tell us where to find plans only a generic reference to that subject.

[@0623kaboom]

try searching FREE RC model plans

[@shelbyseelbach9568]

GOOGLE GOOGLE GOOGLE EASY EASY EASY

[@carlosaugustoleyvasuarez7584]

a tonces tamben ablas ingles

[@ajroomhace47anos55]

Uuuuu sabes ingles

[@ufo1019]

Upgrade the big rc plane

[@ronshepherd8545]

You have bored me already and the ermmm should never be used